2017 FIAT FULLBACK service

[x] Cancel search: service

Page 184 of 312

FIAT FULLBACK 2017  Owner handbook (in English) 147)
Jacking up a 4-wheel drive vehicles
236)
Clutch operation
Quick or slight clutch engagement
made while the engine is running at
high speed will cause damage to the
clutch and transmission because

Page 195 of 312

FIAT FULLBACK 2017  Owner handbook (in English) To decrease the set speed
By using the SET - switch
Push down the SET - switch (B).
Then the set speed displayed in the
combination meter is gradually
decreased. If the set speed reaches to
your desir

Page 197 of 312

FIAT FULLBACK 2017  Owner handbook (in English) Type 1
Type 2
However, the Speed Limiter
immediately starts controlling and the
vehicle decreases as if an accelerator
pedal is closed fully, when the vehicle
speed is higher than the set speed.
247)

Page 206 of 312

FIAT FULLBACK 2017  Owner handbook (in English) ERA GLONASS
(where provided)
ERA-GLONASS is a system designed
to reduce the severity of accidents. The
location and vehicle information is
transmitted from the system to the
emergency call centre in c

Page 207 of 312

FIAT FULLBACK 2017  Owner handbook (in English) Indicator list
Situation Red lamp Green lamp Cause Solution
When setting
the ignition
switch or the
operation
mode to
“ON”Illuminates (for
approx.
10 seconds)Illuminates (for
approx.
10 seconds)Th

Page 209 of 312

FIAT FULLBACK 2017  Owner handbook (in English) WARNING
254)In the country or area where is no
available emergency call centre of the
ERA-GLONASS, or where the radio wave
of emergency call cannot be transmitted or
received normally, the system does

Page 225 of 312

FIAT FULLBACK 2017  Owner handbook (in English) TOWING
If your vehicle needs to be towed
If towing is necessary, we recommend
you to have it done by a Fiat Dealership
or a commercial tow truck service. In
the following cases, transport the
vehicle

Page 236 of 312

FIAT FULLBACK 2017  Owner handbook (in English) Fuse replacement
332) 333) 334) 335) 336) 337)
179)
1. Before replacing a fuse, always turn
off the electrical circuit concerned and
place the ignition switch in the “LOCK”
position or put the ope
Page:   < prev 1-8 9-16 17-24 25-32 next >