2017 FIAT 500X technical specifications

TECHNICAL SPECIFICATIONS
Everything you may find useful for
understanding how your vehicle is
made and works is contained in this
chapter and illustrated with data, tables
and graphics. For the enthusiasts and
the technician, but also just for those
who want to know every detail of their
vehicle.
IDENTIFICATION DATA.........200
ENGINE..................201
WHEELS.................205
DIMENSIONS..............208
WEIGHTS.................210
SUPPLIES................213
FLUIDS AND LUBRICANTS......217
PERFORMANCE............220
FUEL CONSUMPTION.........221
CO2 EMISSIONS............224
PRESCRIPTIONS FOR HANDLING
THE CAR AT THE END OF ITS
LIFE....................226
199

IDENTIFICATION
DATA
VIN PLATE
It is located on the driver's door pillar. It
can be read with the door open and
bears the following data fig. 165:
AName of manufacturer
BVehicle type-approval number
CVehicle identification number
DTechnically allowed max. weight with
full load
ETechnically allowed max. weight for
combined vehicle
FTechnically allowed max. weight on
axle 1
GTechnically allowed max. weight on
axle 2
HEngine identification
IType variant version
LPaintwork colour code
MSmoke absorption coefficient (diesel
versions)
NFurther instructions.
CHASSIS MARKING
The Vehicle Identification Number (VIN)
is stamped on the plate shown in
fig. 166, located on the front left corner
of the dashboard cover, which can be
seen from outside the vehicle, through
the windscreen.
This number is also stamped on the
passenger compartment floor, in front
of the front right seat.
To access it, slide flap A fig. 167 in the
direction shown by the arrow.The marking includes:
type of vehicle;
chassis serial number.
ENGINE MARKING
Engine marking is stamped on the
cylinder block and includes the model
and the chassis serial number.165F1B0330C
3
34AXC1
BXXX
334AXC1BXXX
166F1B0333C
167F1B0058C
200
TECHNICAL SPECIFICATIONS

Versions 1.6 E.Torq 2.4 Tigershark(*)
Engine code 55263842
Cycle Otto Otto
Number and position of cylinders 4 in line 4 in line
Piston bore and stroke (mm) 77 × 85.8 88 × 97
Total displacement (cm³) 1598 2360
Compression ratio 11 ± 0.15 10 ± 0.2
Maximum power (EEC) (kW) 81 129
Maximum power (EEC) (HP) 110 175
corresponding engine speed (rpm) 5500 6400
Maximum torque (EEC) (Nm) 152 230
corresponding engine speed (rpm) 4500 3900
Spark plugsNGK - SINGLE IR - ZKR7BI - 10 JAPAN
C128
FuelUnleaded petrol 95 R.O.N. (EN
228 specifications)Unleaded petrol 95 R.O.N. (EN
228 specifications)
(*) Version for specific markets
202
TECHNICAL SPECIFICATIONS

WARNING
192)Modifications or repairs to the supply
system that are not carried out correctly or
do not take the system technical
specifications into account can cause
malfunctions leading to the risk of fire.
204
TECHNICAL SPECIFICATIONS

COLD TYRE INFLATION PRESSURE (bar)
When the tyres are warm, the inflation pressure should be +0.3 bar compared with the prescribed value. However, recheck that
the value is correct with the tyre cold.
With snow tyres, add +0.2 bar to the pressure value prescribed for standard tyres.
If it is necessary to raise the vehicle, refer to the "Raising the vehicle" paragraph in the "In an emergency" chapter.
TyresUnladen/medium load Full load
Space-saver
wheel
Front Rear Front Rear
215 / 60 R16 95H 2.4 2.4 2.6 2.6
4.2 215 / 55 R17 94V 2.4 2.4 2.6 2.6
225 / 45 R18 91V 2.4 2.4 2.6 2.6
225 / 45 R18 91Y 2.4 2.4 2.6 2.6
206
TECHNICAL SPECIFICATIONS

DIMENSIONS
Dimensions are expressed in mm and refer to the vehicle equipped with its standard-supplied tyres. Height is measured with
vehicle unladen. Small variations with respect to the reported values are possible depending on the dimensions of the rims.
AB C D E FGH I
877 2570 801 4248
1600 / 1608(*)1545 1545 2025 1796
(*) With roof rack bars
168F1B0169C
208
TECHNICAL SPECIFICATIONS

WEIGHTS
Weights (kg) 1.4 Turbo Multi Air 1.4 Turbo Multi Air(*)1.6 E.Torq
Unladen weight (with all fluids,
fuel tank filled to 90% and
without optional equipment)1320 1430 1275
Payload including the driver
(**)555 / 540(***)670 600
Maximum permitted loads
(****)
– front axle 1050 1150 1050
– rear axle 900 1000 900
– total 1875 2100 1875
Towable loads
– braked trailer 1200 1200 800
Maximum load on tow hitch
(braked trailer)60 60 60
Maximum load on roof
(*****)50 50 50
(*) Versions with AT9 automatic transmission
(**) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car weight increases, thus reducing the specified payload in relation to the
maximum permissible loads.
(***) Version for specific markets
(****) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or on the load platform within the
maximum permitted loads.
(*****) With carrier rack
210
TECHNICAL SPECIFICATIONS

Weights (kg) 2.0 Multijet(*)2.0 Multijet(**)
Unladen weight (with all fluids, fuel tank filled
to 90% and without optional equipment)1430 1495
Payload including the driver
(***)620 605
Maximum permitted loads
(****)
– front axle 1150 1150
– rear axle 1000 1000
– total 2050 2100
Towable loads
– braked trailer 1200 1200
Maximum load on tow hitch (braked trailer) 60 60
Maximum load on roof
(*****)50 50
(*) Versions with manual transmission
(**) Versions with AT9 automatic transmission
(***) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car weight increases, thus reducing the specified payload in relation to
the maximum permissible loads.
(****) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or on the load platform within the
maximum permitted loads.
(*****) With carrier rack
212
TECHNICAL SPECIFICATIONS