2017 DODGE VIPER wheel

[x] Cancel search: wheel

Page 273 of 329

DODGE VIPER 2017 VX / 3.G Owners Manual CAUTION!(Continued)
•If a “fast charger” is used while the battery is in the
vehicle, disconnect both vehicle battery cables before
connecting the charger to the battery. Do not use a
“fast ch

Page 284 of 329

DODGE VIPER 2017 VX / 3.G Owners Manual Rear Axle
Axle Lubricant Level Check
Check the exterior of the axle for evidence of gear oil
leakage every 12 months or 6,000 miles (10 000 km). This
check should be made with the vehicle level and on

Page 285 of 329

DODGE VIPER 2017 VX / 3.G Owners Manual •Use a high quality cleaner wax, such as MOPAR Cleaner
Wax to remove road film, stains and to protect your
paint finish. Take care never to scratch the paint.
•
Avoid using abrasive compounds and

Page 286 of 329

DODGE VIPER 2017 VX / 3.G Owners Manual CAUTION!
Do not use scouring pads, steel wool, a bristle brush,
metal polishes or oven cleaner. These products may
damage the wheel’s protective finish. Such damage is
not covered by the New Vehicle

Page 296 of 329

DODGE VIPER 2017 VX / 3.G Owners Manual CAUTION!
•When installing the power distribution center cover,
it is important to ensure the cover is properly posi-
tioned and fully latched. Failure to do so may allow
water to get into the power

Page 306 of 329

DODGE VIPER 2017 VX / 3.G Owners Manual Miles:6,000
12,000
18,000
24,000
30,000
36,000
42,000
48,000
54,000
60,000
66,000
72,000
78,000
84,000
90,000
96,000
102,000
108,000 114,000
120,000
126,000
132,000
138,000
144,000
150,000
Or Months:

Page 317 of 329

DODGE VIPER 2017 VX / 3.G Owners Manual Battery.............................. .120, 269
Charging System Light ....................120
Emergency Starting ...................... .256
Jump Starting .......................... .256
Key Fob Batte

Page 325 of 329

DODGE VIPER 2017 VX / 3.G Owners Manual Seat Belts............................. .26, 67
Child Restraint ...........................55
Extender ...............................32
Front Seat ........................ .26, 28, 30
Inspection ....