2017 Citroen C4 AIRCROSS ECU

161
C4-Aircross_en_Chap06_securite_ed01-2016
Child seat at the rear
Rearward facing
When a rear ward facing child seat is installed
on a rear passenger seat, move the vehicle's
front seat for ward and straighten the backrest
so that the rear ward facing child seat does not
touch the vehicle's front seat.
Forward facing
When a for ward facing child seat is installed
on a rear passenger seat , move the vehicle's
front seat for ward and straighten the backrest
so that the legs of the child in the for ward
facing child seat do not touch the vehicle's front
seat.
Centre rear seat
Ensure that the seat belt is correctly
tensioned.
For child seats with a support leg,
ensure that this is in firm contact with
the floor. If necessary, adjust the front
seat of the vehicle.
Remove and stow the head restraint
before installing a child seat with a
backrest on a passenger seat. Refit the
head restraint once the child seat has
been removed. A child seat with a support leg must never be
installed on the centre rear passenger seat
.
The incorrect installation of a child seat
in a vehicle compromises the protection
of the child in the event of an accident.
6
Safety

162
C4-Aircross_en_Chap06_securite_ed01-2016
Child seats recommended by CITROËN
Group 0+: from bir th to 13 kgL1
"RÖMER Baby-Safe Plus"
Installed in the rear ward facing position.
Group 1: from 9 to 18 kg L2
"FAIR G 0/1 S ISOFIX"
Installed for ward facing, without the ISOFIX base. 6 angled positions for the shell.
L3
"RÖMER Duo Plus ISOFIX" Installed for ward facing.
Can be secured with the seat belt. 3 angled positions for the shell.
CITROËN offers a range of recommended child seats which are secured using a three point seat
belt
:
These seats can also be installed using
the ISOFIX mountings (see following
pages).
Follow the instructions for fitting
the child seat given in the seat
manufacturer's installation guide.
Safety

163
C4-Aircross_en_Chap06_securite_ed01-2016
Locations for child seats secured using the seat beltIn accordance with European regulations, this table indicates the options for installing child seats secured using a seat belt and universally approved (a)
in relation to the weight of the child and the seat in the vehicle.Seat Weight of the child and indicative age
Less than 13 kg
(groups 0 (b) and 0+)
Up to approx. 1 year From 9 to 18 kg
(group 1)
From approx. 1 to 3 years
From 15 to 25 kg (group 2)
From approx. 3 to 6 years
From 22 to 36 kg
(group 3)
From approx. 6 to 10 years
Front passenger seat (c) with
passenger airbag activated X
XXX
Front passenger seat (c) with
passenger airbag deactivated L1
L2, L3 XX
Outer rear seats (row 2) (d) UUUU
Centre rear seat (row 2) (d) L1L2, L3 XX
6
Safety

164
C4-Aircross_en_Chap06_securite_ed01-2016
(a) Universal child seat: child seat which can be installed in all vehicles using the seat belt.
(b)

G
roup 0: from birth to 10 kg. Infant car seats
and "car cots" cannot be installed on the
front passenger seat.
(c)

C
onsult the legislation in force in your
country before installing your child on this
seat.
(d)

T
o install a child seat on a rear seat,
rear ward or for ward facing, move the front
seat for ward, then straighten the backrest,
so as to leave sufficient space for the child
seat and the child's legs. Remove and stow the head restraint
before installing a child seat with a
backrest on a passenger seat. Refit the
head restraint once the child seat has
been removed.
U:
s eat suitable for the installation of a child
seat secured using the seat belt and
universally approved, "rear ward facing" and/
or "for ward facing".
X:

s
eat not suitable for the installation of a child
seat of the weight group indicated.
L-:

o
nly the child seats indicated can be
installed on the seat concerned (depending
on country of sale).
Safety

165
C4-Aircross_en_Chap06_securite_ed01-2016
"ISOFIX" mountings
Your vehicle has been approved in accordance with the latest ISOFIX regulation.
The seats, represented below, are fitted with regulation ISOFIX mountings:
-

t
wo rings A, located between the seat
backrest and cushion, indicated by a
marking, -

a r
ing B, located behind the seat and
identified by a marking, referred to as the
Top Tether for fixing the upper strap.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
The ISOFIX child seats are fitted with
two
latches which are secured on the two
rings
A .
S

ome seats also have an upper strap, known
as the Top Tether, which is attached to ring B .
There are three rings for each seat:
6
Safety

166
C4-Aircross_en_Chap06_securite_ed01-2016
The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
For information on the possibilities for
installing ISOFIX child seats in your
vehicle, refer to the summary table.
To secure the child seat to the TOP TETHER
:
-

r

emove and stow the head restraint before
installing the child seat on the seat (refit it
once the child seat has been removed),
-

p

ass the upper strap of the child seat
behind the seat backrest, centring it
between the apertures for the head
restraint rods,
-
f
ix the hook of the upper strap to the ring B,
-

t

ighten the upper strap. When fitting an ISOFIX child seat to the left-
hand rear seat of the benchseat, before fitting
the seat, first move the centre rear seat belt
towards the middle of the vehicle, so as to
avoid the seat inter fering with the operation of
the seat belt.
Strictly follow the fitting instructions provided in
the user guide supplied with the child seat.
Safety

167
C4-Aircross_en_Chap06_securite_ed01-2016
ISOFIX child seats recommended by CITROËN
These child seats can also be used on seats which are not fitted with ISOFIX mountings.
In this case, they must be attached to the vehicle seat using the three point seat belt.
Follow the instructions for fitting the child seat given in the seat manufacturer's installation guide.
CITROËN offers a range of approved child seats secured using the ISOFIX mountings.
Group 0+: up to 13 kgI L1
RÖMER Baby- Safe Plus and its ISOFIX Baby- Safe plus base
Installed in the rear ward facing position using an ISOFIX base, which is attached to the rings A .
The base has a height-adjustable support leg.
IL2
FAIR G 0/1 S and its ISOFIX RWF base
Installed in the rear ward facing position using an ISOFIX base, which is attached to the rings A .
The base has a support leg.
6 angled positions for the shell.
This configuration is reserved for children weighing up to 13 kg.
6
Safety

168
C4-Aircross_en_Chap06_securite_ed01-2016
Group 1: from 9 to 18 kgIL3
RÖMER Duo Plus ISOFIX
Installed for ward facing.
Attached to the rings A , as well as ring B, known as the TOP TETHER,
using an upper strap.
3 angled positions for the shell.
IL4
FAIR G 0/1 S and its ISOFIX FWF base
Installed in the rear ward facing position using an ISOFIX base, which is attached to the rings A .
The base has a support leg.
6 angled positions for the shell.
This configuration is suitable for children weighing more than 13 kg.
These child seats can also be used on seats which are not fitted with ISOFIX mountings.
In this case, they must be attached to the vehicle seat using the three point seat belt.
Follow the instructions for fitting the child seat given in the seat manufacturer's installation guide.
Safety