2017 CHRYSLER PACIFICA mirror

FRONT VIEW
Front View
1 — Hood/Engine Compartment
2 — Windshield
3 — Exterior Mirrors4 — Doors
5 — Wheels/Tires
6 — Headlights
8 GRAPHICAL TABLE OF CONTENTS

▫Power Folding Third Row Head Restraints — If
Equipped .......................... .101
 STEERING WHEEL .....................101
▫ Tilt/Telescoping Steering Column .........101
▫ Heated Steering Wheel — If Equipped ......102
 MIRRORS ........................... .104
▫ Inside Day/Night Mirror — If Equipped . . . .104
▫ Automatic Dimming Mirror — If Equipped . . .105
▫ Outside Mirrors ..................... .106
▫ Driver’s Outside Automatic Dimming Mirror — If
Equipped .......................... .106
▫ Outside Mirrors Folding Feature ..........106
▫ Power Mirrors — If Equipped ............106
▫ Heated Mirrors — If Equipped ...........107▫
Tilt Mirrors In Reverse (Available With Memory
Seat Only) — If Equipped ...............107
▫ Power Folding Mirrors — If Equipped .......108
▫ Illuminated Vanity Mirrors — If Equipped . . .109
▫ Conversation Mirror ....................110
 EXTERIOR LIGHTS .....................110
▫ Headlight Switch .....................110
▫ Automatic Headlights — If Equipped .......111
▫ Headlights On With Wipers — If Equipped . . .112
▫ Headlight Delay — If Equipped ...........112
▫ Lights-On Reminder ...................112
▫ Daytime Running Lights — If Equipped .....113
▫ Front Fog Lights — If Equipped ...........113
3
GETTING TO KNOW YOUR VEHICLE 15

▫Opening Sunroof ..................... .154
▫ Closing Sunroof ...................... .155
▫ Wind Buffeting ...................... .155
▫ Power Sun Shade — If Equipped ..........156
▫ Pinch Protect Feature ...................157
▫ Sunroof Maintenance ...................157
▫ Ignition OFF Operation .................157
 HOOD ............................. .158
▫ Opening ........................... .158
▫ Closing ............................ .159
 LIFTGATE .......................... .160
▫ Opening .......................... .160
▫ Closing ........................... .162▫
Power Liftgate — If Equipped ............163
▫ Hands-Free Liftgate — If Equipped .........165
▫ Cargo Area Features ....................168
 GARAGE DOOR OPENER — IF EQUIPPED . . . .175
▫ Before You Begin Programming HomeLink . . .176
▫ Canadian/Gate Operator Programming ......180
▫ Using HomeLink .....................182
▫ Security ........................... .182
▫ Troubleshooting Tips ...................182
▫ General Information ....................183
 INTERNAL EQUIPMENT .................184
▫ Storage ............................ .184
▫ Illuminated Vanity Mirrors — If Equipped . . .192
3
GETTING TO KNOW YOUR VEHICLE 17

To move the selected seat(s) to the Normal (seated)
position, push and release the Normal button. The seat
will automatically stop when the Normal position is
reached.
To move the selected seat(s) to the stow position, push
and release the Stow button. The seat will automatically
stop when the Stow position is reached.
To move the selected seat(s) back in the forward or
reverse direction, push and hold the Fold forward or
rearward button. Release the button when the desired
position is reached.
NOTE:
•Disconnect the center shoulder belt from the small
buckle before attempting to fold/stow the power third
row seats. •
To abort seat operation while seat is in motion, push a
different seat position selector switch to stop the seat.
Once the seat stops moving, then the desired position
can be selected.
• The third row power seat system includes obstacle
detection. When the system detects an obstacle, the
motors will stop and reverse direction. Should this
occur, remove the obstacle before pushing the button
again.
Driver Memory Seat — If Equipped
The Memory Buttons 1 and 2 on the driver’s door panel
can be programmed to recall the driver’s seat, outside
mirrors, and radio station preset settings. Your Remote
Keyless Entry (RKE) Key Fobs can also be programmed
to recall the same positions when the UNLOCK button is
pushed.
90 GETTING TO KNOW YOUR VEHICLE

Your vehicle may have been delivered with two RKE key
fobs, one RKE key fob can be linked to each of the
memory positions.
Programming The Memory Feature
To create a new memory profile, perform the following:
1. Cycle the vehicles ignition to the ON/RUN position(do not start the engine).
2. Adjust all memory profile settings to desired prefer- ences (i.e., driver ’s seat, outside mirrors and radio
station presets).
3. Push and release the S (Set) button on the memory switch.
4. Within five seconds, push and release either of the memory buttons (1) or (2). The Electronic Vehicle
Driver Memory Switch
1 — Memory Button 1
2 — Set Button
3 — Memory Button 2
3
GETTING TO KNOW YOUR VEHICLE 91

5. Push and release the LOCK button on the RKE KeyFob within 10 seconds.
NOTE: Your RKE Key Fob can be unlinked to your
memory settings by pushing the SET (S) button, and
within 10 seconds, followed by pushing the UNLOCK
button on the RKE Key Fob.
Memory Position Recall
NOTE: The vehicle must be in PARK to recall memory
positions. If a recall is attempted when the vehicle is not
in PARK, a message will be displayed in the EVIC or
DID.
To recall the memory settings for driver one, push
MEMORY button 1 on the driver’s door or the UNLOCK
button on the RKE Key Fob linked to memory position 1.
To recall the memory setting for driver two, push
MEMORY button 2 on the driver’s door or the UNLOCK
button on the RKE Key Fob linked to Memory Position 2. A recall can be cancelled by pushing any of the MEMORY
buttons on the driver’s door during a recall (S, 1, or 2).
When a recall is cancelled, the driver’s seat stop moving.
A delay of one second will occur before another recall can
be selected.
NOTE:
Pushing the mirror adjust switch will cancel the
memory mirror recall.Easy Entry/Exit Seat (Available With Memory Seat
Only)
This feature provides automatic driver seat positioning to
enhance driver mobility when entering and exiting the
vehicle.
The distance the driver seat moves depends on where
you have the driver seat positioned when you remove the
key from the ignition switch.
• When the ignition switch transitions to the LOCK
position, the driver seat will move about 2.4 inches
3
GETTING TO KNOW YOUR VEHICLE 93

MIRRORS
Inside Day/Night Mirror — If Equipped
A single ball joint mirror is used to allow the driver to
adjust up, down and left, right. Mirror should be ad-
justed to center on the view through the rear window.
Headlight glare can be reduced by moving the small
control under the mirror to the night position (toward the
rear of the vehicle). The mirror should be adjusted while
set in the day position (toward the windshield).
Manual Rearview Mirror
104 GETTING TO KNOW YOUR VEHICLE

Automatic Dimming Mirror — If Equipped
This mirror automatically adjusts for headlight glare
from vehicles behind you. You can turn the feature on or
off by pushing the button at the base of the mirror. A light
to the left of the button will illuminate to indicate when
the dimming feature is activated. The sensor to the right
of the button does not illuminate.
NOTE:This feature is disabled when the vehicle is in
reverse.
CAUTION!
To avoid damage to the mirror during cleaning, never
spray any cleaning solution directly onto the mirror.
Apply the solution onto a clean cloth and wipe the
mirror clean.
Automatic Dimming Mirror
3
GETTING TO KNOW YOUR VEHICLE 105