2017 CHRYSLER 300 reset

1. Stop the vehicle.
2. Shift the transmission into PARK, if possible. If not, shiftthe transmission to NEUTRAL.
3. Push and hold the ignition switch until the engine turns OFF.
4. Wait approximately 30 seconds.
5. Restart the engine.
6. Shift into the desired gear range. If the problem is no longer detected, the transmission will return to normal
operation.
NOTE: Even if the transmission can be reset, we recom-
mend that you visit your authorized dealer at your earliest
possible convenience. Your authorized dealer has diagnos-
tic equipment to determine if the problem could recur.
If the transmission cannot be reset, authorized dealer
service is required.
AUTOSTICK — IF EQUIPPED
AutoStick is a driver-interactive transmission feature pro-
viding manual shift control, giving you more control of the
vehicle. AutoStick allows you to maximize engine braking, eliminate undesirable upshifts and downshifts, and im-
prove overall vehicle performance. This system can also
provide you with more control during passing, city driv-
ing, cold slippery conditions, mountain driving, trailer
towing, and many other situations.
Operation
When the transmission is in DRIVE or SPORT mode, it will
operate automatically, shifting between the eight available
gears. To engage AutoStick, simply tap one of the steering
wheel-mounted shift paddles (+/-) while in DRIVE or
SPORT mode. In DRIVE mode, this will activate a tempo-
rary AutoStick mode. The transmission will revert back to
normal operation after a period of time, depending on
accelerator pedal activity. When the transmission gear
selector is in the SPORT position, tapping either shift
paddle will activate
permanentAutoStick mode. The
transmission will remain in AutoStick mode until the
driver deliberately disables AutoStick (as described be-
low). Tapping (-) to enter AutoStick will downshift the
transmission to the next lower gear, while using (+) to enter
AutoStick will retain the current gear. When AutoStick is
active, the current transmission gear is displayed in the
instrument cluster.
5
STARTING AND OPERATING 309

4. Insert the screwdriver into the slot in the center of thelever, and disengage the lever locking tab by pushing it
to the right.
5. While holding the locking tab in the disengaged posi- tion, pull the tether strap to rotate the lever up and
rearward, until it locks in place in the vertical position.
The vehicle is now out of PARK and can be moved.
Release the parking brake only when the vehicle is
securely connected to a tow vehicle. To Reset The Manual Park Release:
1. Push the latch (at the base of the lever, on the rear side)
rearward (away from the lever) to unlatch the lever.
2. Rotate the Manual Park Release lever forward and down, to its original position, until the locking tab snaps
into place to secure the lever.
3. Pull up gently on the tether strap to confirm that the lever is locked in its stowed position.
4. Tuck the tether strap into the base of the console. Reinstall the console storage bin.
Locking Tab Location
Tether Strap Location
6
WHAT TO DO IN EMERGENCIES 395

for fluid specifications. It is important to maintain the
transmission fluid at the correct level using the recom-
mended fluid. No chemical flushes should be used in any
transmission; only the approved lubricant should be used.
CAUTION!
Using a transmission fluid other than the manufactur-
er ’s recommended fluid may cause deterioration in
transmission shift quality and/or torque converter
shudder. Refer to “Fluids, Lubricants, And Genuine
Parts” in this section for fluid specifications.
Special Additives
The manufacturer strongly recommends against using any
special additives in the transmission. Automatic Transmis-
sion Fluid (ATF) is an engineered product and its perfor-
mance may be impaired by supplemental additives. There-
fore, do not add any fluid additives to the transmission.
Avoid using transmission sealers as they may adversely
affect seals.
CAUTION!
Do not use chemical flushes in your transmission as
the chemicals can damage your transmission compo-
nents. Such damage is not covered by the New Vehicle
Limited Warranty.
Fluid Level Check
The fluid level is preset at the factory and does not require
adjustment under normal operating conditions. Routine
fluid level checks are not required, therefore the transmis-
sion has no dipstick. Your authorized dealer can check
your transmission fluid level using special service tools.
If you notice fluid leakage or transmission malfunction,
visit your authorized dealer immediately to have the
transmission fluid level checked. Operating the vehicle
with an improper fluid level can cause severe transmission
damage.
7
MAINTAINING YOUR VEHICLE 425

MAINTENANCE SCHEDULE
Your vehicle is equipped with an automatic oil change
indicator system. The oil change indicator system will
remind you that it is time to take your vehicle in for
scheduled maintenance.
Based on engine operation conditions, the oil change
indicator message will illuminate. This means that service
is required for your vehicle. Operating conditions such as
frequent short-trips, trailer tow, extremely hot or cold
ambient temperatures, and E85 fuel usage will influence
when the “Change Oil” or “Oil Change Required” message
is displayed. Severe Operating Conditions can cause the
change oil message to illuminate as early as 3,500 miles
(5,600 km) since last reset. Have your vehicle serviced as
soon as possible, within the next 500 miles (805 km).
The “Oil Change Required” message will be displayed in
the instrument cluster and a single chime will sound,
indicating that an oil change is necessary.Your authorized dealer will reset the oil change indicator
message after completing the scheduled oil change. If a
scheduled oil change is performed by someone other than
your authorized dealer, the message can be reset by
referring to the steps described under “Instrument Cluster
Display” in “Understanding Your Instrument Panel” for
further information.
NOTE:
Under no circumstances should oil change inter-
vals exceed 10,000 miles (16,000 km), twelve months or 350
hours of engine run time, whichever comes first. The 350
hours of engine run or idle time is generally only a concern
for fleet customers.
Severe Duty All Models
Change Engine Oil at 4,000 miles (6,500 km) if the vehicle
is operated in a dusty and off-road environment, or is
operated predominantly at idle or only very low engine
RPM’s. This type of vehicle use is considered Severe Duty.
454 MAINTENANCE SCHEDULES

Maintenance Procedures..................... .408
Maintenance Schedule .......................454
Malfunction Indicator Light (Check Engine) . . . .215, 406
Manual Park Release ........................394
Manual, Service ............................464
Master Cylinder (Brakes) .....................423
Memory Feature (Memory Seat) ................112
Memory Seat ..............................112
Memory Seats And Radio .....................112
Methanol ............................... .358
Mirrors ..................................86
Electric Powered ..........................93
Electric Remote ...........................93
Exterior Folding ..........................92
Heated .................................95
Outside ................................91
Rearview ...............................86
Vanity .................................95
Modifications/Alterations, Vehicle ................7
Monitor, Tire Pressure System ..................351
Mopar Parts .......................... .407, 463
MTBE/ETBE ............................. .358
Multi-Function Control Lever ..................121 New Vehicle Break-In Period
...................75
Occupant Restraints .........................36
Octane Rating, Gasoline (Fuel) .......357, 449, 450, 451
Oil Change Indicator, Reset ...................231
Oil, Engine .....................408, 449, 450, 451
Capacity ...............................447
Change Interval ........................ .409
Checking .......................... .408, 409
Dipstick ............................408, 409
Disposal ...............................411
Filter .......................411, 449, 450, 451
Filter Disposal ...........................411
Identification Logo .......................409
Materials Added To .......................411
Pressure Warning Light ....................211
Recommendation .....................409, 447
Synthetic ............................. .410
Viscosity .......................... .410,447
Oil
Filter, Change ..........................411
Oil Filter, Selection ..........................411
Oil Pressure Light ..........................211
Onboard Diagnostic System ...................405
Operating Precautions .......................405
Operator Manual (Owner’s Manual) ...............4
10
INDEX 475

Voice Recognition System (VR).................279
Warning Flasher, Hazard .....................380
Warning Lights (Instrument Cluster Description) . . . .217
Warnings And Cautions .......................6
Warranty Information .......................463
Washer Adding Fluid .......................... .416
Washers, Windshield .....................127, 416
Washing Vehicle .......................... .427
Water Driving Through ........................ .313
Wheel And Wheel Trim ..................... .428
Wheel And Wheel Trim Care ..................428
Wind Buffeting ..........................34, 187
Window Fogging .......................... .276
Windows .................................32
Power .................................32
Reset Auto-Up ...........................34
Wind Buffeting ...........................34 Windshield Defroster
.........................77
Windshield Washers .....................126, 127
Fluid .................................416
Windshield Wiper Blades .....................416
Windshield Wipers ........................ .126
Wiper Blade Replacement .....................416
Wipers, Intermittent ........................ .126
Wipers, Rain Sensitive .......................128
482 INDEX