Cadillac XTS Owner Manual (GMNA-Localizing-MidEast-10292881) - 2017 -
crc - 7/1/16
VEHICLE CARE 225
1.Engine Air Cleaner/Filter 0231.
2. Power Steering Fluid Reservoir (Under Engine Cover). See Power
Steering Fluid 0238.
3. Engine Oil Fill Cap. See Engine
Oil 0228.
4. Engine Oil Dipstick (Out of View). See Engine Oil0228.
5. Engine Cover 0227.
6. Engine Cooling Fans (Out of View). See Cooling System 0233.
7. Brake Fluid Reservoir. See Brakes 0240.
8. Engine Coolant Surge Tank and Pressure Cap. See Engine
Coolant 0234.
9. Battery 0242 (Battery Cover not
Shown).
10. Remote Positive (+) Terminal (Battery Cover not Shown). See
Jump Starting 0273.
11. Engine Compartment Fuse
Block 0248.
12. Remote Negative (−) Terminal (Out of View). See Jump
Starting 0273. 13. Windshield Washer Fluid
Reservoir. See Washer
Fluid 0239.
Cadillac XTS Owner Manual (GMNA-Localizing-MidEast-10292881) - 2017 -
crc - 7/1/16
VEHICLE CARE 227
1.Engine Air Cleaner/Filter 0231.
2. Power Steering Fluid Reservoir (Under Engine Cover). See Power
Steering Fluid 0238.
3. Engine Oil Fill Cap. See Engine
Oil 0228.
4. Engine Oil Dipstick. See Engine
Oil 0228.
5. Engine Cover 0227.
6. Engine Cooling Fans (Out of View). See Cooling System 0233.
7. Charged Air Coolant Reservoir and Pressure Cap. See Engine
Coolant 0234.
8. Brake Fluid Reservoir. See Brakes 0240.
9. Engine Coolant Surge Tank and Pressure Cap. See Engine
Coolant 0234.
10. Battery 0242 (Battery Cover not
Shown).
11. Remote Positive (+) Terminal (Battery Cover not Shown). See
Jump Starting 0273.
12. Engine Compartment Fuse
Block 0248. 13. Windshield Washer Fluid
Reservoir. See Washer
Fluid 0239.
14. Remote Negative (−) Terminal (Out of View). See Jump
Starting 0273.
Engine Cover
3.6L V6 Engine
1. Engine Oil Fill Cap
2. Engine Cover Bolt
3. Engine Cover
To remove:
1. Remove the oil fill cap (1).
2. Remove the engine cover bolt (2). 3. Raise the engine cover (3) to
release it from the retainers.
4. Lift and remove the engine cover.
5. Reverse Steps 1–4 to reinstall the engine cover.
3.6L V6 Engine Twin Turbo Engine
1. Engine Oil Fill Cap
2. Engine Cover
3. Engine Cover Bolt
To remove:
1. Remove the oil fill cap (1).
2. Remove the engine cover bolt (3).
3. Raise the engine cover (2) to release it from the retainers.
Cadillac XTS Owner Manual (GMNA-Localizing-MidEast-10292881) - 2017 -
crc - 7/1/16
238 VEHICLE CARE
2. Turn the heater on to the highesttemperature and to the highest
fan speed. Open the windows as
necessary.
3. When it is safe to do so, pull off the road, shift to P (Park) or
N (Neutral), and let the
engine idle.
If the temperature overheat gauge is
no longer in the overheat zone or an
overheat warning no longer displays,
the vehicle can be driven. Continue to
drive the vehicle slow for about
10 minutes. Keep a safe vehicle
distance from the car in front of you.
If the warning does not come back on,
continue to drive normally and have
the cooling system checked for proper
fill and function.
If the warning continues, pull over,
stop, and park the vehicle right away.
If there is no sign of steam, idle the
engine for three minutes while parked.
If the warning is still displayed, turn
off the engine until it cools down.
Also, see “Overheated Engine
Protection Operating Mode ”next in
this section.Overheated Engine
Protection Operating Mode
This emergency operating mode
allows the vehicle to be driven to a
safe place in an emergency situation.
If an overheated engine condition
exists, an overheat protection mode,
which alternates firing groups of
cylinders, helps prevent engine
damage. In this mode, there is
significant loss in power and engine
performance.
The engine coolant temperature
warning light comes on in the
instrument cluster, to indicate the
vehicle has entered overheated engine
protection operating mode. The
temperature gauge also indicates an
overheat condition exists. Driving
extended distances and/or towing a
trailer in the overheat protection
mode should be avoided.
Power Steering Fluid
The power steering fluid reservoir is
under the engine cover on the
passenger side toward the rear of the
engine compartment. See Engine
Compartment Overview 0224.
When to Check Power Steering
Fluid
It is not necessary to regularly check
power steering fluid unless you
suspect there is a leak in the system
or an unusual noise is heard. A fluid
loss in this system could indicate a
problem. Have the system inspected
and repaired.
How to Check Power Steering
Fluid
Check the level when the engine
is cool.
Cadillac XTS Owner Manual (GMNA-Localizing-MidEast-10292881) - 2017 -
crc - 7/1/16
VEHICLE CARE 239
To check the power steering fluid:1. Remove the engine cover. Refer toEngine Cover 0227.
2. Wipe the cap and the top of the reservoir clean.
3. Turn the cap counterclockwise and pull it straight up.
4. Wipe the dipstick with a clean rag.
5. Replace the cap and completely tighten it.
6. Remove the cap again and look at the fluid level on the dipstick.
The fluid level should be
between MIN and MAX on the
dipstick.
What to Use
To determine what kind of fluid to
use, see Recommended Fluids and
Lubricants 0295. Always use the
proper fluid.
Washer Fluid
What to Use
When adding windshield washer fluid
to the vehicle, be sure to read the
manufacturer instructions before use.
If you will be operating your vehicle in
an area where the temperature may
fall below freezing, use a fluid that
has sufficient protection against
freezing.
Adding Washer Fluid
The appropriate message will appear
on the Driver Information Center (DIC)
when the fluid level is low. See Washer
Fluid Messages 0143.
Open the cap with the washer symbol
on it. Add washer fluid until the tank
is full. See Engine Compartment
Overview 0224 for reservoir location.
Caution
.
Do not use washer fluid that
contains any type of water
repellent coating. This can
cause the wiper blades to
chatter or skip.
. Do not use engine coolant
(antifreeze) in the windshield
washer. It can damage the
windshield washer system
and paint.
. Do not mix water with
ready-to-use washer fluid.
Water can cause the solution
(Continued)
