
Opening and clo sin g
Emergency unlocking and locking the doors
----
F ig. 2 1 Drive r's door : door lock cy linder
F ig. 22 Fr ont p asse nge r's door: eme rgency release
If the central locking system malfunct ions, you
must unlock/lock the doors separately using the
mechanical key .
Unlocking /locking the dri ver's door with the
mechanic al key
• Remove the mechan ical key ¢ page 26.
• To unlock the driver's door, turn the key to the
open position @¢
fig. 21.
• To lock the dr iver's door, move the selector lev
er to the P position (automat ic transmission)
and turn the key
one time to the close position
@ .
Locking the front passenger's door with the
me chanic al key
The emergency lock is located on the edge of the
front passenger 's door.
It is only visible when the
door is open.
• Remove the mechan ica l key ¢
page 26.
• Pull the cap out of the opening¢ fig. 22.
• Inse rt the key into the slot inside and turn it all
th e way to the right (right door) or to the left
( left door*) .
30
Once the front passenger's door is closed, it is no
longer possible to open it from the outside. The
door can be opened from the inside by pul ling
the door handle.
Anti-theft alarm system
If the anti-theft alarm system detects a vehicle
break -in, audio and visual warn ing s ignals are
triggered . The anti-theft alarm system is activat
ed whe n the vehicle is locked as usual. It
switches off when the vehicle is unlocked.
Luggage compartment
lid
Opening/closing the luggage compartment
lid
F ig. 23 Opened luggage compa rtmen t lid
-
•
•
•
'
Opening the luggage compartment lid
m 0 0
~ m
• Press the l<.::< I button on the remote control key
for at least several seconds to open the luggage compa rtment lid . O r
• Lift the luggage compa rtment lid .
Closing the luggage compartment lid
• Pull down the luggage compartment lid and let
it close us ing a gent le push ¢.&, .
.&_ WARNING
-Due to the risk of in ju ry, a lways be aware of
the re ar passengers when closi ng the lug
gage compartment lid .
- After closing the luggage compartment lid,
make sure that it is latche d. Othe rw ise the

Opening and closing
Power window
Controls
The driver can control all power windows.
Fig. 26 Driver's door: power w indow controls
All power window sw itches have a two-stage
function:
Opening and closing the windows
N
N
M 0 ::':, (X) m
"'To open or close the w indow completely, press
the switch down or pu ll the switch up br iefly to
the second level. The operation will stop if the
switch is pressed/p ulled aga in.
.. To se lect a position in between opened and
closed, press/pull the switch to the first level
until the desired window position is reached.
Power window switches
(D Left doo r
@ Right door
A WARNING
- Pay careful attention when closing the win
dows. Pinching could cause serious injur ies.
- When locking the vehicle from outside, the
vehicle must be unoccupied since the win dows can no longer be opened in an emer
gency .
(D Tips
- You can still open and close the windows for
approximately 10 minutes after turning the i gnition
off. The power windows do not
switch
off until the driver's door or front
passenger's door has been opened.
- When you open the doors, the w indows au
tomatically lower approximately 10 mm.
32
· Convenience opening/closing
All windows can be opened and closed at the
same time.
Convenience opening feature
.. Press the~ button on the remote control key
until all windows reach the desired position.
Convenience closing feature
.. Press the (TI button on the remote control key
until a ll windows are closed~&. or
Convenience closing with the convenience
key*
.. Touch the sensor* on the door handle long
enough until all windows are closed . Do not
place your hand in the door handle when doing
this.
Setting convenience opening in the
Infotainment system
.. Select in the Infotainment system : IMENU! but
ton
>Ve hicle > left control button >V ehicle set
t in gs .
To enable the convenience window opening func
tion, the
Long press to open windows function
must be switched
on .
A WARNING
-Never close the w indows carelessly or in an
uncontrolled manner, because this increas
es the risk of injury.
- For security reasons, the windows can only
be opened and closed with the remote con
trol key at a maximum distance of approx i
mate ly 6 ft (2 m) away from the vehicle.
When pressing the~ button, always watch
the windows while they are closing so that
no one is pinched in the window. The closing
process will stop immediately when the~
button is released.

CD
CD
.... N
" N ...... 0
0
Ill co
Correcting power window malfunctions
You can reactivate the one-touch up/down func
tion if it malfunctions.
~ Pull the power window switch up until the win
dow is completely raised.
~ Release the switch and pull it up again for at
least one second .
Garage door opener
(Homelink)
Description
Applies to: vehicles with garage door opener (Homelink)
Fig. 27 Garage door o pen er: examples of usage for differ
ent sy stems
With the garage door opener (Homelink), you
can act ivate systems such as the garage doors,
security systems or house lights from inside your
vehicle. Up to three remote control functions can
be programmed to the three buttons that are in
tegrated in the control unit above the rearview
mirror.
To be able to operate systems using the garage door opener, the buttons in the control unit must
first be programmed .
A WARNING
When operating or programming the garage
door opener, make sure that no people or ob
jects are in the area immediately surrounding
the equipment . People can be injured or prop
erty can be damaged if struck when closing.
Open ing and closing
(D Tips
-For security reasons, we recommend that
you clear the programmed buttons before selling the vehicle.
- For add itiona l information about Homelink,
visit
www.homelink.com.
- For the Declaration of Conformity with the
provisions from the FCC in the United States
and Industry Canada, see ¢
page 304.
Operation
Applies to: vehicles with garage door opener (Home Link)
Fig. 28 Control pane l above the interior rearview mirror
Requirement: the button in the control panel
must be programmed ¢
page 34 and the vehi
cle must be located within range of the system,
such as the garage door.
~ Press the button to open the garage door. The
green LED(!) blinks or turns on.
~ Press the button again to close the garage
door.
(D Tips
To open or close the garage door, do not press the button longer than 20 seconds or
the garage door opener will switch to pro
gramming mode .
33

Lights and Vision
Lights and Vision
Exterior lighting
Switching lights on and off
Fig. 30 Instrument panel: l ight sw itch
Li ght switch ·~ -
I
Tu rn the switch to the corresponding position.
When the lights are switched on, the
;oo: symbo l
turns on .
0 -lights are off (in some markets, the daytime
running lights* are switched on when the ignition
is switched on.)
- USA models : the daytime running lights switch
on automatically when the ignition is switched on and the light switch is set to the
O or the
AUTO position (only in daylight). The D ayt ime
runn ing lights
can be switched on and off in
the MMI
c:;, page 37c:;, &..
-Ca nad a model s: the daytime running lights
switch on automatically when the ignition is
switched on and the light switch is set to the
0 ,
::oo: or the AUTO position (only in daylight) c:;, &. .
AUTO* - automatic headlights switch on and off
depending on br ightness, for example in twilight,
during ra in or in tunnels.
;oo: -Parking lights
io -Low beam headlights
l~"' I -All-wea ther lights*
@il -Rear fog light(s)
All-weather light s*
In vehicles with all-weathe r lights, the front
lights are adjusted automatically so that you are
36
l ess likely to see g lare from your own head lights,
for example when driving on a wet road.
Automatic dynamic headlight range control
system*
You r vehicle is equipped with a headlight range
contro l system so that there is less g lare for on
coming t raffic if the vehicle load changes. The
headlight range also adjusts automatically when
braking and accelerat ing.
Light functions
The following light funct ions may be avai lable
depending on ve hicle equ ipment and only f unc
tion when the light switch is in the AUTO posi
tion.
Static cornering light* (vehicles with LED head
li ghts) -the cornering light switches on automat
ica lly when the steer ing whee l is turned at acer
ta in angle at speeds up to approximate ly 44 mph
(70 km/h) and when the turn s ignal is activated
at speeds up to approximately 25 mph (40 km/ h) . The area to the side of the vehicle is illum inat
ed bette r when turn ing.
H ighway light fun ction * (vehicles with LED head
lights) - this function adapts the lighting for
highway driv ing based on veh icle speed .
Speed dependent light distributio n* (vehicles
with LED headlights) -the speed dependent light
distribution adapts the light in towns a nd on
highways or expressways . Intersections can a lso
be illumina ted on veh icles w ith a navigation sys
tem*.
& WARNING
- Autom atic headlig hts* are o nly inten ded to
assist the driver. They do not relieve the
driver of responsi bility to check the head
lights and to t urn them on manually based
on the current light and vis ibility conditions.
For examp le, fog cannot be detected by the
light sensors. So always switch o n the low
beam under these weather condit ions and
when dr iv ing in the da rk
io.
- The rear fog lights should only be turned on
in acco rdance w it h traffic regulations, to
prevent glare for traffic behind your vehicle . ..,.

CD
CD
.... N
" N ...... 0
0
Ill co
-If the battery has been discharging for a
wh ile, the parking light may sw itch off auto
matically. Always make sure your vehicle is
parked and adequately lit according to the
laws . Avo id using the parking lights for sev
eral hours.
- Always observe legal regulations when us
ing the light ing systems described.
(D Tips
- The light sensor for the automatic head
lights* is in the rearview mirror mount. Do
not place any stickers in th is area on the
windsh ield.
- Some exterior lighting functions can be ad
justed
Qpage 37.
-If you turn off the ignition wh ile the exterior
lights are on and open the door, a warning
tone so unds .
- In some markets, the ta il lights will sw itch
on when the dayt ime run ning lights switch
on.
- In cool or damp weather, the inside of the
headlights, turn signals and tail lights can
fog over due to the temperature difference
between the inside and outs ide. They will
clear short ly after switching them on. This
does not affect the service life of the light
ing.
Turn signal and high beam lever
The Lever operates the turn signals, the high
beams and the headlight flasher.
@
,
t
@
F ig. 31 Turn signal and high bea m lever
N
5 0
~ a:,
Lights and V ision
Turn signals ¢ 9
The turn signa ls act ivate when yo u move the lev
er into a turn signal position when the ignition is
switched on.
(D -rig ht tu rn signal
@ -left turn signal
The turn signa l blinks three times if you tap the
lever (convenience turn signa l).
High beams and headlight flasher
~D
Move the lever to the corresponding position:
@ -high beams on
@-high beams off or headlight flasher
T he
II indicator light in the instrument cluster
turns on.
A WARNING
= H igh beams can cause glare for other drivers,
which increases the risk of an accident. For
this reason, only use the high beams or the
headlight flasher when they will not create
g lare for other dr ivers.
Adjusting the exterior lighting
The functions are adjusted in the Infotainment
system .
.,. Select in the Infotainment system: I MENU ! but
ton> Vehicle > left control button >Vehicle set
tings > Exterior lighting .
Automatic headlights
You can adjust the following settings in the Au
tomatic headlights menu:
Activation time -you can adjust if the headlights
switch on Early, Medium or Late according to the
sensit ivity of the light sensor.
Audi adaptive light * -you can sw itch adaptive
light
On and Off .
Daytime running lights*
USA models: the daytime running lights can be
switched on or off using the MM I. Select
On or
Off .
37

CD
CD
.... N
" N .... 0
0
Ill co
Instrument illumination
Fig. 34 Instrument illum inatio n
The brightness of the instrument cluster and the
center console can be adjusted.
~ Press the knob to release it .
~ Turn the knob toward"·" or"+" to reduce or in
crease the b rightness .
~ Press the knob aga in to return it to its original
pos it ion.
Vision
Adjusting the exterior mirrors
F ig. 35 Driver 's door: knob for the exter ior mirrors
Turn the knob to the desired pos ition:
Q/P -Adjusting the left/ right exter io r mir ror.
Move the knob in the desired direction .
4lil-Heating the mirror glass depending on the
outside temperat ure.
8 • Folding exterior mirrors* . In the Infotain
ment system, you can select if the mirrors fold in
automatically when you lock the vehicle
9 page 29.
Lights and V ision
Front passenger 's e xterior mirror tilt
function*
T o help you see the curb when backing into a
parking space, the surface of the mirror ti lts
slight ly. For this to happen, the knob must be in
the position for the front passenger's outside
mirror .
You can adjust the tilted mirror s urface by turn
ing the knob in the desired d irection. When you
move out of reverse and into another gear, the
new mirror position is stored and assigned to the
key you are using .
The m irror goes back into its or iginal position
once you drive forward faster than 9 mph
(15 km/h) or turn the ignition off .
A WARNING
Curved m irror surfaces (convex) enlarge the
field of vision. However, they make objects in
the m irror appear smalle r and farthe r away.
Your may estimate incorrec tly when you use
these m irrors to gauge your distance from the
vehicles behind yo u when changing lanes,
which increases the risk of an accident.
(D Note
If t he mir ror housing was moved by outs ide
fo rces (such as an impact when maneuver
i ng), you must use the power fo ld ing funct ion
to fold the mirror a ll the way out . The mirror
housing must not be moved back into place
by hand because th is would impair the func
tion of the mirror mechanism.
(D Tips
If the power ad justing function ma lfunctions,
the glass in both m irrors can be adjusted by
pressing on the edge of it by hand .
39

Lights and Vision
Dimming the mirrors
Fig. 36 Automatic d imm ing rearview mirror
Manual dimming rea rview mirror
.. Pull the lever on the bottom of the mirror back.
Automatic dimm ing rearview mirror*
.. Press t he button @Qfig.
36 . The indicator
li ght @turns o n. Interior and exterior mirro rs *
will dim w hen the re is i ncom ing light (such as
headlights from the rear) .
A WARNING
Electro lyte fluid can leak from automat ic dim
m ing mir rors i f the g lass is broken . Electro
lyte f luid can irritate skin, eyes and airways.
- Repeated or long-te rm exposure to elect ro-
lyte fluid can lead to irritation of the air
ways, especially in peop le wit h asthma or
ot he r resp irato ry co ndi tions. Tak e deep
breath s immed iate ly after leaving the veh i
cl e or, if this is no t possible, o pen a ll of th e
doors and win dows as wide as possible .
-If elec troly te f lu id ente rs the eyes, flush
t h em thor oughly wi th a la rge amoun t of
cl ean wa ter for a t least 15 mi nutes an d then
seek medical attention.
- If e lec trolyte f lu id comes into con tact w ith
t h e skin , flush the affected a rea wit h clean
water for at least 15 minutes a nd the n clean
with soap and water and seek medica l at
tentio n. Clean affected cloth ing and shoes
t h oroughly bef ore wearing again.
- If the fluid was swallowe d an d the person is
conscious, fl ush the mouth with water for at
least 15 m inutes. Do not induce vomiting
unless this is recommended by me dica l pro-
40
fessiona ls . Seek medical attention immedi
ately .
(D Note
I f the glass on an a utomat ic dimming mirro r
breaks, electro lyte can lea k out . This liquid
damages p lastic sur faces. Remove t he liquid
as quickly as possible, fo r example using a
wet sponge.
@ Tips
- If the light reaching the rearview mirror is
obstructed, the automatic d imm ing mirror
w ill not function correctly,
- The automatic dimming m irrors do not dim
when the interio r lighting is turned o n or
the reverse gear is se lected .
Sun v isors
Fi g. 37 Sun visor
m
-0 0 ::1-u.. co
T he sun visors can be moved out of their brackets
and tu rned toward the doors
Q fig . 37 @. The
mirror light switches on when the cover over the
vanity mir ror @ ope ns.

CD
CD
.... N
" N ...... 0
0
Ill co
Windshield wipers
Switching the windshield wipers on
Fig. 38 Windshie ld wiper lever
Move the windshield wiper lever to the corre
sponding position:
@ -windshield w ipers off
@ -interval mode. To increase/decrease the wip
er intervals, move the switch ® to the left/right.
In vehicles with a rain sensor*, the wipers turn on in the rain once the vehicle speed exceeds ap
proximately 2 mph (4 km/h). The higher the sen
sitivity of the rain sensor* is set (switch ® to the
right), the earlier the windsh ield wipers react to
mo isture on the windsh ield. You can deact ivate
the rain sensor mode* in the Infotainment sys
tem, which switches the intermi ttent mode on.
Select in the Infotainment system:
I MENU! but
ton>
Vehicle > left control button >Driver as sis
tance > Rain sensor
> Off.
@ -slow wiping
@ -fast wip ing
© -sing le w ipe If you hold the lever in th is posi
tion longer, the wipers switch from slow wiping
to fast w iping.
® -clean the windshield To eliminate water
droplets, the windshield wipers perform one af
terwipe after several seconds while driving in
temperatures above 39 °F (4 °C). You can switch
this function off by moving the lever to position
@ within 10 seconds of the afterwipe . The after
wipe function is reactivated the next t ime you
switch the ignition on.
C leaning the headlights* . The headlight washer
system* only functions when the lights are
Lights and V ision
switched on. The headlights are automatically
cleaned the first time and every fifth time the
l ever is moved to position
® ·
A WARNING
--
- The rain sensor* is only intended to assist
the driver. The driver may still be responsi
ble for manually sw itch ing the w ipers on
based on visibility cond itions.
- The windsh ield may not be treated w ith wa
ter-repelling w indshield coating agents. Un
favorable condit ions, such as wetness, dark
ness, and when the sun is low, can cause in
creased glare, wh ich increases the risk of an
accident. Wiper blade chatter is also possi
b le.
- Properly functioning windshield wiper
b lad es are required for a cl ear v iew and safe
driving
<:::> page 42, Replacing windshield
wiper blades .
(D Note
-If there is frost, make sure the windshield
w iper blades are not frozen to the wind
shield. Switching on the windshield w ipers
when the blades are frozen to the wind
shield can damage the wiper blades.
- Prior to using a car wash, the w indshield
wiper system must be switched off (lever in
position 0). This prevents the wipers from
switching on unintentionally and caus ing
damage to the windsh ield wiper system.
(D Tips
- The windshie ld wipers switch off when the
ignition is switched off. You can activate the
w indshield wipers after the ignition is
switched back on by moving the w indshield
w iper lever to any position.
- Wor n or dirty windshield w iper blades result
in streaking. This can affect the rain sensor*
function . Check your w indshield w iper
blades regularly .
- The washer f luid nozzles in the windsh ield
washer system are heated * at low tempera-
tures when the ign ition is o n. .,.
41