<( a, .... N ,....
N .... 0 0
3 a,
A WARNING 1-= -
Improperly installed child safety seats in
crease the risk of serious personal injury and
death in a collision .
- Always make sure that the safety belt re
tractor is locked when installing a child
safety seat . An unlocked safety belt retrac
tor cannot hold the child safety seat in place
during no rma l driving or in a crash.
- Always buckle the child safety seat firmly in
place even if a child is not sitting in it. A
loose child safety seat can fly around d uring
a sudden stop or in a collision .
- Always ma ke sure that the rear seat bac k
rest to wh ich the center rea r safety be lt is
attached is secure ly latched whenever the
rear center safety belt is being used to se
cure a ch ild rest raint.
- If the backrest is not securely latched, the
child and the child restraint will be thrown
forward together with the backrest and will
strike parts of the vehicle interior. The ch ild
can be seriously injured or killed.
- Never install rear-facing child safety seats or infant carriers on the front passenger
seat. A child will be serious ly injured and
can be killed when the passenger airbag in
flates .
- The inflating a irbag w ill hit the child safety
seat or infant carrier with great force and
will smash the ch ild safety seat and ch ild
against the backrest, center armrest, door
o r roof.
- Always install rear-faci ng child safety seats
o r infant carriers on the rear seat.
- Forward-fac ing ch ild safety seats or infant
c a rriers ins talled on the front passenge r's
seat may inte rfe re with t he deployment of
the a irbag and cause serious injury to the
child.
- It is s afe r to ins tall a forward-fac ing ch ild
sa fety seat on the rear seat.
- Always read and heed all WARN INGS when
ever using a child res trained in a veh icle is
being used
r:o page 2 77. Spec ia l precautions
apply when installing a child safety seat on
the front passenger seat
¢ page 2 54, Child
Ch ild safety
restraints on the front seat -some impor
tant things to know.
A WARNING
-A lways take special precautions if you must
i nstall a forward or rearward-facing child re
stra int on the front passenger's seat in excep
tional s ituations:
- Whenever a forward or rearward-fac ing
child restraint is installed on the front pas
senger seat, the
PASSENGER AIR BAG OFF
~; light must come on and stay on whenev
er the ign ition is switched o n.
- I f the
PASSENGER AIR BAG OFF~; light
does not come on and stay on, perform the
checks desc ribed
r:o page 265, Monitoring
the Advanced Airbag System.
- Take the child restra int off the front passen
ge r seat and install it prope rly at one of the
rear seat positions i f the
PASSENGER AIR
BAG OFF~;
light does not stay on whenever
the ignition is switched on .
- Improper installat ion of child res tra ints can
reduce their effectiveness or even prevent
them f rom providing any protect ion .
- An improperly installed child restraint can
interfere with the airbag as it deploys and
serious ly injure or even kill the chi ld.
- Always carefully follow the manufacturer's
instr uctions provided with the child safety
seat or carr ier .
- After checking to make sure that the c hild
restraint is properly installed, make certain
that the child restraint is correctly recog
n ized by the capacitive passenger detection
system in the front passenger seat and that
the
PASSENGER AIR BAG OFF~; light sig
na ls the cor rect front passenger fronta l air
bag status.
A WARNING
F orwa rd-facing child restra ints:
- Always make sure the forward-facing seat
has bee n des igned and certified by its man
ufacturer for use on a front seat with a pas
senger front and side airbag.
-
289
Child safety
-Never put the forward-facing child restraint
up, against or very near the instrument pan
el.
- Always move the front passenger seat to
the highest position in the up and down ad
justment range and move it back to the
rearmost position in the seat's fore and aft
adjustment range, as far away from the air
bag as possible, before installing the for
ward-facing child restraint.
- Always make sure that the safety belt upper
anchorage is behind the child restraint and
not next to or in front of the child restraint
so that the safety belt will be properly posi
tioned.
- Make sure that the
PASSENGER AIR BAG
OFF~ ;
light comes on and stays on all the
time whenever the ignition is switched on.
A WARNING
Rearward-facing child restraints:
- A child in a rearward-facing child safety seat
installed on the front passenger seat will be
seriously injured and can be killed if the
front airbag inflates -even with an Ad
vanced Airbag System.
- The inflating airbag will hit the child safety
seat or infant carrier with great force and
will smash the child safety seat and child
against the backrest, center armrest, door
or roof .
- Always be especially careful if you must in
stall a rearward facing child safety seat on
the front passenger seat in exceptional cir
cumstances .
- Make sure that the
PASSENGER AIR BAG
OFF~;
light comes on and stays on all the
time whenever the ignition is switched on.
- If the
PASSENGER AIR BAG OFF~; light
does not come on and stay on, immediately
install the rear-facing child safety seat in a
rear seating position and have the airbag
system inspected by your Audi dealer .
290
· Activating the convertible locking retractor
Use the convertible locking retractor to secure a
child restraint.
Always heed the child safety seat manufacturer 's
instructions when installing a child restrain t in
your vehicle . To activate the convertible locking
retractor:
.. Place the child restraint on a seat, preferably
on the rear seat .
.. Slowly pull the belt
all the way out .
.. Route it around or through the child restraint
belt path
~ ,&. .
.. Push the child safety seat down with your full
weight to get the safety belt really tight.
.. Insert the belt tongue into the buckle for that
seating position.
.. Guide the safety belt back into the retractor un
til the belt lies flat and snug on the child safety
seat.
.. You should hear a "clicking" noise as the belt
winds back into the inertia reel. Test the con
vertible locking retractor by pulling on the belt.
You should no longer be able to putt the belt
out of the retractor. The convertible locking re
tractor is now activated .
.. Make sure that the red release button is facing
away from the child restraint so that it can be
unbuckled quickly.
.. Pull on the belt to make sure the safety belt is
properly tight and fastened so that the seat
cannot move forward or sideways more than
one inch (2 .5 cm) .
A WARNING
Using the wrong child restraint or an improp
erly installed child restraint can cause serious
personal injury or death in a crash.
- Always make sure that the safety belt re
tractor is locked when installing a child
safety seat. An unlocked safety belt retrac
tor cannot hold the child safety seat in place
during normal driving or in a crash.
- Always buckle the child safety seat firmly in
place even if a child is not sitting in it. A
loose child safety seat can fly around during
a sudden stop or in a crash.
<( a, .... N ,....
N .... 0 0
3 a,
-Always make sure the seat backrest to which
the child restraint is installed is in an up
right position and securely latched into
place and cannot fold forward. Otherwise,
the seatback with the child safety seat at
tached to it could f ly forward in the event of
an accident or other emergency situation.
- Always read and heed all WARNINGS when
ever using a child restrained in a veh icle is
being used¢
page 277. Specia l precaut ions
apply when installing a child safety seat on
the front passenger seat
¢ page 2 54, Child
restraints on the front seat -some impor
tant things to know.
Deactivating the convertible locking
retractor
The convertible locking retractor for child re
straints will be deactivated automatically when
the belt is wound all the way back into the re
tractor .
~ Press the red button on the safety belt buckle.
The belt tongue will pop out of the buckle.
~ Guide the safety belt all the way back into its
stowed position .
Always let the safety belt retract completely into
its stowed position. The safety belt can now be
used as an ordinary safety belt without the con
vertible locking retractor for child restraints.
If the convertible locking retractor should be ac
tivated inadvertently, the safety belt must be un
fastened and guided completely back into its
stowed position to deact ivate this feature. If the
convert ible locking retractor is not deactivated,
the safety belt w ill gradually become tighter and
uncomfortable to wear.
_& WARNING
-
Improperly installed chi ld safety seats in
crease the risk of serious personal injury and
death in a collision.
- Never unfasten the safety belt to deactivate
the convertible locking retractor for child re
straints while the vehicle is moving . You
Child safety
would not be restrained and could be seri
ously injured in an accident.
- Always read and heed all WARNINGS when
ever using a child restrained in a vehicle is
be ing used
¢ page 2 77. Special precautions
apply when install ing a child safety seat on
the front passenger seat¢
page 254, Child
restraints on the front seat -some impor
tant things to know.
LATCH system (Lower
anchorages and tethers
for children)
Child Restraint System anchors and how
are they related to child safety
To provide a simpler and more practicab le way to
attach the child restraint on the vehicle seat,
Federal regulations require special lower ancho
rages in vehicles and devices on new child re
straints to attach to the vehicle anchorages .
In the United States, the combination of the
tether anchorages and the lower anchorages is
now generally called the LATCH system for
"Lower Anchorages and Tethers for Children". In
Canada, the terms "top tether" with "lower uni
versa l anchorages" (or "lower universal anchor
age bars") are used to descr ibe the system .
In other countries the term "ISOFIX" is used to
describe the lower anchorages .
Forward-facing child restraints manufactured af
ter September 1, 1999, are required by U.S. fed
eral regulations to comply with new child head
movement performance req uirements. These
new performance requirements make a tether
necessary on most new ch ild seats.
Installing a child restraint that requires a top
tethe r without one can seriously impair the per
formance of the child restraint and its ab ility to
pro tect the child in a collision. Installing a child
restra int that requi res a top tether without the
top tether may be a violation of state law.
Child restraint manufacturers offer LATCH lower
anchorages on their child seats w ith hook-on or ..,.
291
Child safety
push-on connectors attached to adjustable
straps.
I n addition to the LATCH lower anchorages, these
chi ld restraint systems usually require the use of
tether straps to he lp keep the child restraint
firm ly in place.
A WARNING
Improper installation of child restraints will
increase the risk of injury and death in a
crash.
- Always follow the instructions provided by
the manufacturer of the child restraint you intend to install in your veh icle.
- Never install a child restraint without a properly attached top tether strap if the
child restraint manufacturer's instruct ions
requ ire the top tether strap to be used.
- Improper use of child restra int LATCH lower
anchorage points can lead to injury in a colli
s ion . The LATCH lower anchorage points are
designed to withstand on ly those loads im
posed by cor rect ly fitted child restraints .
- Never mount two child restraint systems on
one LATCH lower anchorage point.
- Never secure or attach any luggage or other
item to the LATCH lower anchorages.
Location
Fig. 234 Schem atic overv iew : LA TCH ancho rage point loca
t io ns
The illustration shows the seating locatio ns in
your veh icle which are equipped with the lower
anchorages system.
292
Description
The lower anchorage positions are marked for
quick locating .
Fig. 235 Second row of s eats: locator b uttons for lowe r an
cho rages
Lower anch orage s
The lower anchorage attachment points are lo
cated between the rear seatback and rear seat
cush io n
¢ fig . 235.
Lower anchorages secure the child restraint in
the seat without using the vehicle's safety belts.
Anchorages prov ide a secure and easy-to-use at
tachment and minimize the poss ib ility of improp
er child restraint installat ion .
All child restraints manufactured after Septem ber 1, 2002, must have lower anchorage attach
ments for the
LATCH system.
Remember that the lower anchorage points are
only intended for installation and attachment of
ch ild restraints spec ifically certified for use with
LATCH lower anc horages. Child restra ints that
are not eq uipped w ith the lower anchorage at
tachments can still be installed in compl iance
with the ch ild restraint manufacture r's i nstr uc
tions on using vehicle safety bel ts.
A WARNING
Improper use of LATCH lower anchorages can
cause ser ious persona l injury in an accident.
- Always carefully follow the ch ild restraints
manufacturer's instructions for proper in
stallation of the child restraint and proper
use of the lower anchorages or safety belts
in your vehicle .
-Never secure or attach any luggage or other
items to the
LATCH lower anchorages .
- Always read and heed the important infor
mation about child restraints in this chapter
and WARNINGS
c:> page 277, Child safety.
Installing a child restraint with LATCH
lower anchorages
Whenever you install a child restraint always fol
low the child restraint manufacturer's instruc
tions .
Fig. 236 Lower anchorages: p roper mount ing
Mounting
.. Make s ure the seatback of the rear seat bench
i s in the upr igh t position and secu rely latched
in place .
.. Remove the covers to access the lower anchor
age brackets.
.. Attach both hook-on connectors with the spring
catch release on the child safety seat onto the
LATCH lower anchorage so that the connectors
lock into place
c:> fig . 236 .
.. Pull on the connector attachments to make
s ur e they a re prope rly attached to the LA TC H
lower anchorage .
.. Pull straps tight fo llowing the child restra int
manufacturer's instructions.
Releasing
.. Loosen the tension on the straps following the
ch ild rest raint man ufactu rer's inst ruct ions .
.. Depress the spri ng catches to release the an
chorage hooks from the lower anchorages .
Remember: Use tether straps to he lp keep the
chi ld restraint f irmly in place .
Child sa fety
A WARNING
-Improper use of the LATCH system can in-
crease the ris k of serious persona l injury a nd
death in a n accident.
- These anchors were developed only for child
safety seats using the "LATCH" system.
- Never attach other ch ild safety seats, be lts
or other objects to these anchors.
- Always make sure that you hear a click when
latching the seat in place . If you do not hear
a click the seat is not sec ure and co uld f ly
forward and hit the inter ior of the vehicle,
or be ejected from the veh icle.
A WARNING
-I mp roper insta llation of child restra ints w ill
i n cr ease the risk of injury in an accide nt.
- Always follow the ch ild restraint system
manufac ture r's instruc tions fo r proper in
stallat io n of t he chi ld restrain t system and
p roper use of tether straps as well as the
lower ancho rages or safety belts in yo ur ve
h icle.
- Always read and hee d the important info r
mation and WARN INGS about ch ild safety
and the installation of child restrai nt sys
tems
c> page 2 77, Child safety .
Tether anchors and tether straps
Fig. 23 7 Tet her anchors: recess flaps beh ind the rear set
backs
The tether anchors for the rear seat ing pos itions
are located in recesses in the rear window shelf .
A tether is a straight or V-shaped strap that at
taches the top part of a ch ild restraint to special
anchorage poi nts in the veh icle. ..,
293
Child safety
The purpose of the tether is to reduce the for
ward movement of the child restraint in a crash,
in order to help reduce the risk of head injury
that could be caused by striking the vehicle inte rior .
Forward facing child restraints manufactured af
ter September 1, 1999, are required by U .S. fed
eral regulations to comply with new child head movement performance requirements . These
new performance requirements make a tether
necessary on most new child safety seats .
A WARNING
Improper installation of child restraints will
increase the r isk of injury and death in a
crash.
- Always follow the instructions provided by
the manufacturer of the child restraint you
intend to ins tall in your Audi.
- Imprope r use of child restra int anchors (in
cl ud ing tether anchors) can lead to in jury in
a collision. The anchors are designed to
withstand only those loads imposed by cor
rectly f itted child restraints .
- Never mount two child restraint systems on
one LATCH lower anchor point .
- Never attach two child restrai nt systems to
one tether strap or tether anchorage.
- Never a ttach a tether strap to a t ie -down
hoo k in the luggage compartment.
- Never use ch ild restraint tether an chorages
to sec ure safety belts or other k inds of occ u
pant restraints.
- Never secure or a ttach any luggage or other
items to the LATCH lower anchorages or to
the tether anc ho rs.
294
Installing the upper tether strap on the
anchorage
Fig. 238 Tet her s tra p: prope r rout ing an d mo unting
Install ing the tether strap
.,. Release or deploy the tether strap on the ch ild
restraint according to the ch ild restraint manu
facture r's instructions.
.,. Guide the upper te ther strap
under the rear
head rest raint (raise the head restra int if neces
sary) . For child restraints with V -tether straps,
always make sure that the head restraint guide
rods do not interfere with any part of the top
tether strap.
.,. Tilt the recess f lap up to expose the anchor
bracket.
.,. Attach the tether st rap anchorage hook into
the opening of the tether anchorage .
.,. Pull on the tether strap hook so that the spring
catch of the hook engages .
.,. Ti ghten the tether strap f irm ly following the
child restraint manufacture r's instructions .
Releasing the tether strap
.,. Loosen the tension fo llow ing the child restra int
manufact urer's instr uctions.
.,. Depress the spr ing catch on the hook and re
lease it from the anchorage.
(D Note
I f you leave the child restra int with the tethe r
strap firmly installed for severa l d ays, this
could leave a mark on the upholstery on the
seat cushion and backrest in the area where
the tether strap was installed. The upholstery
would a lso be permanently stretched a round
the tether strap. T his applies especially to
l eathe r seats .
Using tether straps on rearward-facing
child restraints
Currently, few rear-facing chi ld restraint systems
come with a tether. Please read and heed the
child restraint system manufacturer's instruc
tions carefully to determine how to properly in
stall the tether.
A WARNING
A child in a rearward-facing child safety seat
installed on the front passenger seat will be
ser iously injured and can be killed if the front
airbag inflates -even w ith an Advanced A irbag
System.
- T he inflating a irbag w ill hit the child safety
seat or infant carrier with great force and
will smash the child safety seat and child
against the backrest, center armrest, or
door.
- If you must install a rearward facing child
safety seat on the front passenger seat be
cause of exceptiona l circumstances and the
PASSENGER AIR BAG OFF,;; light does not
come on and stay on, immed iate ly install
the rear-facing child safety seat in a rear
seat ing pos ition and have the airbag system
inspected by your Audi dealer.
Additional information
Sources of information about child
restraints and their use
There are a number of sources of additional in
formation about child restraint selection, instal
lation and use:
NHTSA advises that the best child safety seat is
the one that fits your child and fits in your vehi
cle, and that you will use correctly and consis
tently .
Try before you buy!
U .S National Highway Traffic Safety Administra
tion
;;!; Tel.: 1-888-327-4236 (TTY: 1-800-424-9153) ....
~ http://www.nhtsa.gov
N 8 http ://www.safercar.gov
0
3
Tel.: (202) 662-0600
http:/ /www.safekids .org
Safety BeltSafe U .S.A
Tel.: (800) 745-SAFE (English)
Tel.: (800) 747-SANO (Spanish) http://www. ca rseat. org
Child safety
Transport Canada Information Centre
Tel.: 1-800-333-0371 or ca ll 1-613-998-8616 if
you are in the Ottawa area
http://www.tc.gc.ca/ eng/roadsafety/menu. htm
Audi Customer Relations
Tel.: (800) 822-2834
295
Check ing and F illing
Engine compartment
Working in the engine compartment
Special care is required if you are working in the
engine compartment
Fo r wo rk in th e engine compa rtmen t, s uch as
c h ec kin g and filli ng flu id s, th ere is a risk of in
j u ry, sc aldin g, ac cide nts, a nd b urn s. For this
rea son, foll ow all the warning s and gener al
s a fe ty p recaution s pr ov ided in the f ollow ing in·
f o rm ation . Th e en gine c omp artmen t is a dan
ger ous are a.
¢ ,&.
_& WARNING
- T urn the engine off.
- Switch the ign ition off .
- Set the parking brake .
- Select the P selector lever pos ition .
- let the engine cool down.
- Never open the hood if you can see steam or coolant escaping from the engine compart
ment, because th is increases the r isk of
burns . Wait until no steam or coolant is es
caping .
- Keep ch ildren away from the engine com
partment .
- Never spill flu ids on a hot engine. These flu
ids (such as the anti -freezing agent con
ta ined in the coolant) can ignite .
- Avoid short circu its in the electrical system,
especially to the battery .
- When working in the engine compartment,
remember that the rad iator fan can sw itch
on even if the ign ition is switched off, which
increases the risk of injury .
- Never open the cap on the coolant expan sion tank when the eng ine is warm. The
cooling system is under pressu re .
- To protect your face, hands, and arms from
hot steam or coolant, cover the cap with a
large cloth when opening.
- Do not remove the engine cover under any
circumstances. This increases the risk of
burns.
- If tests need to be performed w ith the en
gine running, there is additional danger d ue
304
to moving components (such as the ribbed
be lt, alternator and rad iator fan) and from
the high-voltage ignition system.
- Do not under any circumstances activate the
throttle inadvertently (for example, by hand
from the engine compartment) if the vehi
cle is stat ionary but the eng ine is running
and a gear is engaged . Otherwise, the veh i
cle will start to move immediately and this
could result in an acc ident.
- Pay attent ion to the following warnings list
ed when wor k on the fue l system o r on the
electrical equipment is req uired.
- Always disconnect the vehicle battery
from the vehicle electrical system.
- Do not smoke .
- Never work near open flames.
- Always have a working fire extinguisher
nearby
- To reduce the r isk of e lectr ic shock and in
jury, never touch the follow ing components
when the engine is running or is being start
ed:
- Ign ition cable
- Other components in the electronic high-
voltage ign ition system
- If you must check or perform work on the engine whi le it is running:
- Set the parking brake and place the selec
tor lever in the P (park) pos ition first.
- Always proceed w ith extreme cau tion so
that clothing, jewelry or long hair do not become ca ught in the rad iator fan, fan
belt or other moving components or do
not come into contact with hot compo
nents. Tie back long hair before beginning
work and do not wear clothing that can hang down into the engine .
- Limit your exposure to exhaust and chemi
cals to as short a time as possible¢.&. .
_& WARNING
California Proposition 65 Warning :
- Engine exhaust, some of its constituents,
and certa in vehicle components conta in or
emit chemicals known to the State of Cali-
fornia to cause cancer and birth defects and ..,