Safety belts
General information
Always wear safety belts!
Wearing safety belts correctly saves lives!
This chapter explains why safety belts are neces
sary, how they work and how to adjust and wear
them correctly. .. Read all the information that follows and heed
all of the instructions and WARNINGS.
A WARNING
Not wearing safety belts or wearing them im
properly increases the risk of serious personal
injury and death.
- Safety belts are the single most effective
means available to reduce the risk of serious
injury and death in automobile accidents.
For your protection and that of your passen
gers, always correctly wear safety belts
when the vehicle is moving.
- Pregnant women, injured, o r physically im
paired persons must also use safety belts.
Like all vehicle occupants, they are more
likely to be seriously injured if they do not
wear safety belts. The best way to protect a
fetus is to protect the mother -throughout
the entire pregnancy.
Number of seats
Your Audi has a total of five seating positions:
two in the front and three in the rear. Each seat ing position has a safety belt.
A WARNING
Not wearing safety belts or wearing them im
properly increases the risk of serious personal
injury and death.
- Never strap more than one person, includ
ing small children, into any belt.
It is espe
cially dangerous to place a safety belt over a
;;§ child sitting on your lap.
~ -Never let mo re people ride in the vehicle
:::l than there are safety belts available. 0 0
3
-Be sure everyone riding in the vehicle is
properly restrained with a separate safety
belt or child restraint.
Safety belt warning light
Your vehicle has a warning system for the driver
and front seat passenger to remind you about the importance of buckling-up.
Fi g. 208 Safety belt warn ing light in the instrument clus ·
te r -en larged
Before driving off, always:
.. Fasten your safety belt and make sure you are
wearing it properly.
.,. Make sure that your passengers also buckle up
and properly wear their safety belts.
.,. Protect children with a child restraint system
appropr iate for the size and age.
The warning light . in the instrument cluster
lights up when the ignit ion is switched on as a re
minder to fasten the safety belts . In addition,
you w ill hear a warn ing tone for a certain period
of time.
Fasten your safety belt and make sure that your
passengers also properly put on their safety
belts.
A WARNING
-
- Safety belts are the sing le most effective
means available to reduce the risk of serious
injury and death in automobile accidents.
F or your protection and that of your passen
gers, a lways correctly wear safety belts
when the vehicle is moving .
- Failure to pay attention to the warning light
that comes on could lead to personal injury.
245
switched on and turns the airbag indicator light
on when a malfunction in the one of the system
components is detected
c::> page 265. Because
the front passenger seat contains important
parts of the Advanced Airbag System, you must
take care to prevent it from being damaged .
Damage to the seat may p revent the Advanced
Airbag System for the front passenger seat from
doing its job in a crash.
The f ront Ad vanc ed Airb ag Sy stem con sist s
of the following:
- Crash sensors in the front of the vehicle that
measu re vehicle accelerat ion/ decelerat ion to
provide information to the Advanced Airbag
System about the severity of the crash.
- An electronic cont rol unit, with integrated
c rash sensors for front and side impacts. The
contro l unit "decides" whether to fire the front
airbags based on the information received from
the crash sensors . The contro l unit also "de
cides" whether the safety be lt pretensioners
should be activated .
- An Advanced Airbag with gas generator and
contro l valve for the driver ins ide the steer ing
wheel hub.
- An Advanced Airbag with gas generator and
contro l valve inside the instrument panel for
the front passenger.
- A capac itive passenger detect ion system under
neath the front passenger seat cover. This sys
tem measures the electrical capac itance of the
person in the seat . The information registered
i s sent conti nuously to the electron ic cont rol
unit to regulate deployment of the front Ad
vanced Airbag on the passenge r side.
- An airbag monitoring system and indicator
li ght
mi n the instrument cluster.
- A sensor in each front seat registers the dis
tance between the respective seat and the
stee ring wheel or instrument panel. The info r
mation reg istered is sent contin uous ly to the
electronic control unit to regulate deployment
of the front Adv a need Airbags.
- T he
PASSE NGER AIR BAG OFF~; ON @ light
; comes on in the headliner
c:> page 265,
~ fig. 222 and te lls you the status of the Ad-
8 vanced Airbag on the passenger side. 0
3
-A sensor in the safety belt latch for the driver
and for the front seat passenger that senses
whether that safety be lt is latched or not and
transmits this information to the electronic control un it.
A WARNING ,.__
Damage to the front passenger seat can pre
vent the front airbag from working properly .
- Improper repair or disassembly of the front
passenger and driver seat will prevent the
Advanced Airbag System from funct ion ing
p roperly.
- Repairs to the front passenger seat must be
pe rformed by qualified and properly trained
wo rkshop personne l.
- Never remove the front passenger or driver
seat from the vehicle .
- Never remove the upholstery from the front
passe nger seat.
- Never d isassemble or remove parts from the
seat or disconnect w ires from it.
- Never carry sharp objects in your pockets or
put them on the seat. The capacit ive pas
senger detect ion mat in the front passenger
seat will not function p roperly if it is punc
tured.
- Never carry things on your lap or carry ob
jects on the front passenge r seat. Such ob
jects ca n infl uence the capacitance reg is
tered by the capacitive passenger detection
system, so that incorrect information is pro
vided to the airbag control unit.
- Never store items unde r the front passenger
seat . Parts of the Advanced Airbag System
under the passenger seat could be dam
aged, preventing them and the airbag sys
tem from working properly.
- Never p lace seat covers or replacement up
holstery that have not been specifically ap
proved by Audi on the front seats.
- Seat covers can prevent the Advanced A ir
bag System from recognizing child re
stra ints or occupants on the front passenger
seat and prevent the side airbag in the seat
backrest from deploying properly .
- If a seat heater has been retrofitted or oth- erwise added to the front passenger seat ,
~
261
Checking and Filling
authorized Audi dealer or authorized Audi
Service Facility for assistance.
Fuel filler door emergency release
If the central locking system is faulty, the fuel
filler door can be unlocked manually.
Fig. 241 L uggage compartment: opening the side t rim
panel
F ig. 242 luggage compartment: fue l fi ller doo r emergency
r elease
The emergency opening mechanism is located
behind the right side trim panel in the luggage
compartment.
• Open the cover in the side panel
¢fig. 241.
• Loosen the loop c> fig. 242 from the retainer
and then pull on the loop carefully
c>0 . The
fuel filler door releases.
• Press on the left side of the fuel filler door to
open it
¢page 298, fig. 239 .
(D Note
Only pull on the loop until you feel resistance .
You will not hear it release. Otherwise you
could damage the emergency re lease mecha
nism .
300
Selective catalytic
reduction (AdBlue)
General information
Applies to: vehicles with selective catalytic reduct ion
In vehicles with selective catalytic reduction, a
urea solution (AdBlue) is injected into the ex
haust system before a nitrogen oxide cata lytic
converter to reduce nitrogen emissions.
The Ad Blue is carried in a separate tank in the ve hicle. The Ad B lue usage accounts for approxi
mately 1.0% to 2.5% of the diesel fuel that is
used.
When a message about refi lling the AdBlue ap
pears in the instrument cluster display, you must
ref ill the Ad B lue yourself or have it refilled by an
authorized Audi dealer or authori zed Audi Service
Facility
c> page 301.
(l} Tips
- The d isp lay indicates the distance rema ining
that can be driven¢
page 300. If the Ad Bl
ue tank is completely empty, the engine will
not start again after the ignition is switched
off .
- Ad Blue is required by law to operate th is ve
hicle.
Messages in the instrument cluster display
App lies to: vehicles with selective cata lytic reduction
The display indicates if the Ad Blue level is low or
if there is a system malfunction .
Ad Blue level low
You will be informed in the instrument cluster
display if the Ad Blue in the tank drops below a
certain level. Add at a minimum the amount of
Ad Blue shown in the message:
• Refill with at least x qt (l) Ad Blue . Range
x mi (km)
This message appears when there is only enough
AdBlue left to drive the distance indicated in the
instrument cluster. Fill the AdBlue.
• Refill with at least x qt (I) AdBlue . No en
gine start in x mi (km ). See owner's manual
This message appears when there is only enough
Ad Blue left to drive the distance indicated in the i nstr ument cluster . Fill the Ad Blue. Otherwise
the eng ine will not start aga in if you stop it once
the distance indicated has been dr iven .
• Refill with at least x qt (l) AdBlue. Engine
start not po ssible . S ee owner 's m anual
This message appears when the AdBlue ta nk is
empty. Fill the AdB lue . Otherwise you will not be
ab le to start the engine agai n once yo u stop it.
The AdBl ue m ust be refilled when the amoun t in
the tank has reached the minimum level
c::> page 301, Preparation .
Incorrect filling/system malfunction
A message appears if the Ad Blue tank was filled
with a f luid other than Ad Bl ue and the system
h as detec ted that the t ank was fi lled incor rect ly,
or if there is a system malfunc tion .
II Ad Blue: malfunct ion! No engine start in
x mi (km ). See owner's manual
This message appears when it is only poss ible to
drive the d istance indicated in the instrumen t
cluster . Drive to the nearest authorized A udi
deale r or autho riz ed Aud i Serv ice Facility to have
the m alfunction co rrected. Otherwise the engine
w ill no t start aga in if you stop it once the d is
tance indicated has been driven .
• Ad Blue : malfun ction! No engin e start poss i
ble. See owner' s manual
This message appea rs if the system has detected
that the tank was filled inco rrectly or that there
is a malfunction . D rive immediately to the near
est a utho riz ed Aud i dea ler o r authorized Audi
Service Fa cili ty to have the malfunction correct
ed . Otherwise you will not be able to start the en
gine again once you stop it.
Checking and Filling
Preparation
Applies to: vehicles with selective cata lytic reduction
Fig. 243 Right rear s ide o f th e ve hicle: removing t he Ad Bl
u e cap
The Ad Blue tank ope ning is located near the d ie
se l tank opening. Add at least 1.5 gallons (5. 7
L)
of Ad Blue. This is the minim um amount required
to ensure the system detects the refilling and to
start the engine. You can add a maximum of 6.3 gallons (24 L).
Requireme nt: the request to add Ad Blue must
appea r in the instrument cluster disp lay.
.,. Switch the ignit ion off.
.,. Open the tank filler doo r
c::> page 298.
.,. Tu rn the tank filler neck cap to the left to re
move
c::>fig. 243.
.,. Refill Ad Blue using a bottle c::> page 302, a can
ister
c::> page 302 or a pump nozzle
c::> page 303 .
A WARNING , ~ -Ad B lue can irritate the sk in, eyes and respira
tory sys tem.
If th ere is contact with the flu id,
flus h immed iate ly w ith plenty of wa ter. Con
su lt a phys ician if necessary.
(D Note
- Only use Ad Blue that conforms to the
standard ISO 22241-1. Do not m ix any addi
tives with the Ad Blue and do not dilu te it
w ith wate r.
- Do not add AdBl ue to the diesel tank or add
diese l fuel to t he A d Bl ue tank. Do not s tart
t he engine un de r any c ircumst ances if th e
wrong fuel is filled in the tan k. There is a
r is k of damaging the fue l tank system and
301
Checking and Filling
-If you notice that the hood is not latched
wh ile you are dr iv ing, stop immediately and
Engine compartment overview
The most important check points .
close it, because driving when the hood is
not latched increases the r isk of an accident.
F ig. 247 Ty pical lo ca tion of th e reservoir a nd the engine o il filler op ening
@ Washer fluid reservoir (0) . . . . . . 316
@ Jump start po int( +) under a cover,
(-) with hex head screw . ...... .. 314,356
@ Eng ine oil filling opening
(
® Brake fluid reservoir (0)) . . . . . . . 31 1
The location of the engine oil filling hole and the coo lant expansion tank~
fig. 247 (items @and
@) may differ depending on the engine version .
A WARNING
Read and follow all WARNINGS before check
ing anything in the eng ine compartment
~ page 304.
306
Engine oil
Engine oil specifications
The engine oil used must conform to exact speci
fications .
The serv ice interval d isplay in the instrument
cluster of your vehicle will inform you when it is
time for an o il change. We recommend that you
have you r oil changed by an author ized Audi Se rv
i ce Adv isor.
If you have to top off the oil between oil changes, u se the Audi oil quality standard specif ied in the
tab~.
~
<( a, .... N ,....
N .... 0 0
3 a,
Audi oil quality standard
Gas oline
VW 502 00 or
engi ne vw 504 00
Diesel vw 507 00
eng ine
A udi recomm ends
~ Castrot /jglQ,Y j;-11Jt ?rtwF«J.o,.11-J.
Audi recomm ends Longlife high perf orma nce
engine oil from Aud i Genuine Parts
Using the proper engine oil is important for the
functionality and service life of the eng ine. Your
engine was factory-filled with a high-quality oil
which can usually be used throughout the entire
year.
(D Note
Your Limited New Vehicle Warranty does not
cover damage or malfunctions due to failure
to follow recommended maintenance and use
requirements as set forth in the Aud i Owner's
Manual and Warranty
& Maintenance booklet .
- Use only a high quality eng ine oil that ex-
pressly complies with the Aud i oil quality
standard specified for your vehicle's engine .
U si ng a ny other oil can cause serious engine
damage.
- Do not mix any lubr icants or othe r additives
i nto the engine oil. Doing so can cause en
gine damage.
If you need to add oil and there is none availa
ble that meets the Audi o il quality standard
your eng ine requ ires, you may add a tota l of
no more than 0 .5 qua rt/liter of a h igh-quality
"synthetic"oil that meets the following speci
fications.
- Vehicles with gasoline engine: AC EA A3 or
API SM with a viscosity grade of SAE OW-30,
SAE SW-30 or SAE 5W-40.
- Vehicles with diesel engine: ACEA C3 or API CF with a viscosity grade of SAE OW-30
or SAE 5W-30.
- For more information about engine oil that
has been approved for your vehicle, please
contact either your authorized Audi dea ler
Ch eck ing and Filling
or Audi Customer Relations at
1 (800) 822-2834 or visit our web site at
www.aud iusa .com or www .a udicanada .ca.
Engine oil consumption
The engine in your vehicle depends on on ade
quate amount of oil to lubricate and cool all of
its moving ports.
In order to provide effective lubrication and cool
ing of internal engine components, all internal
combust ion eng ines consume a certa in amount
of oil. Oil consumption varies from eng ine to en
gine and may change s ignificantly over the life of
the engine. Typ ically, engines w ith a specified
break-in period (see
c::> page 73) consume more
o il during the break-in per iod than they consume
after oil consumpt ion has stabil ized.
Under normal cond itions, the rate of oil con
sumption depends on the quality and viscos ity of
the oil, the RPM (revolutions per minute) at
which the engine is operated, the amb ient tem
peratu re and road co ndit ions. Furt her fac to rs a re
the amo unt of oil di lution from wate r condensa
tion or fuel residue and the oxidation level of the oi l. As any engine is subject to wear as mileage
builds up, the oil consumption may increase over
time unt il replacement of worn components may
become necessary.
With a ll these variab les coming into play, no
standard rate of oil consumption can be estab
lished or spec ified . There is no alternative to reg
ular and frequent checking of the oi l level, see
Not e.
If the yellow engine oil level warning symbo l El
in the instrument cluster lights up, you should
check the oil level as soon as possible
c::> page 308 . Top off the o il at your earliest con
venience
c::> page 308 .
A WARNING
Before you check anyt hing in the engine com
partment, always read and heed all WARN
IN GS
c::> .&. in Working in the engine compart-
ment on page 304. ..,_
307
<( a, .... N ,....
N .... 0 0
3 a,
significantly under-inflated tire causes the tire to
overheat and can lead to tire failure. Under-infla
tion also reduces fue l eff ic iency and tire tread
life, and may affect the vehicle's hand ling and
stopping ab ility.
Please note that the TPMS is not a substitute for
proper tire ma intenance, and it is the driver's re
sponsib ility to ma intain correct tire pressure,
even if under-inflation has not reached the leve l
to tr igger illum inat io n of the TPMS low tire p res
sure telltale .
Your veh icle has also been equ ipped w ith a TPMS
malfunct ion indicator to indicate when the sys
tem is not operat ing properly. The TPMS mal
function ind icator is combined w ith the low tire
p ressure tellta le. Whe n the system detects a
malfunct ion, the te lltale will flash fo r approxi
mate ly one m inute and then remain cont inuo usly
illum inated. This sequence will continue upon
subseq uent ve hicle start -ups as long as the ma l
function exists.
When t he mal funct io n ind icator is ill umin ated,
the system may not be ab le to detec t or signal
l ow tire pressure as intended. TPMS ma lfunctions
may occur for a variety of reasons, incl uding the
installation of replacement or alternate t ires or
wheels on the vehicle that prevent the TPMS from functioning properly. Always check the
TPMS malfunction telltale after rep lacing one or
more t ires or whee ls on your ve hicle to ensu re
that the replacement or alte rnate ti res and
wheels a llow the TPMS to con tinue to func tion
p roperly.
If the Tire Pressure Monitoring System
indicator appears
The tire pressure indicator in the instrument
cluster informs you if the tire pressure is too low
or if there is a system mo/function.
Using the ABS sensors, the tire pressure mo nitor
ing system compa res the tire tread circ umfe r
ence an d vib ration cha racteristics of the individ u
a l tires. If the pressure changes in one or more
tires, this is ind icated in the instrument cluster
d isp lay with an
RE indicator light and a message.
Wh eel s
If only one tire is affected, the location of that
t ir e will be indicated.
T he tire press ures mus t be store d in the Infot ain
ment system again each t ime the pressures
change (switching between partia l and full load
pressure) or after changing or replacing a tire on
yo ur vehicle ¢
page 336 . The tire p ressure mon i
toring indicator only monitors the t ire press ure
you have sto red. Refer to the tire pressure labe l
for the recommended tire press ure for your vehi
cle
¢page 327, fig. 256 .
Tire tread circumference and vibration cha racter
istics can change and cause a tire pressu re warn
i ng if:
- the t ire pressure in one or more tires is too low.
- the ti res have structure damage .
- t he t ire w as rep lace d or the t ire pressu re
changed and it was no t store d aga in
¢page 336.
-only partially used tires a re rep laced w it h new
tires .
Indicator lights
RE-Loss of pressu re in at leas t one tire¢ &.
Check the tires and repla ce or repair if necessary.
C heck/co rrect the pressures on all fou r tires and
store the pressure again in the Infotainment sys
tem ¢
page 336 .
m (T ire Pressure Moni tor ing Sys tem) Tire
pres sure: malfunction! See owner' s manual.
If
m appea rs a fter swi tching the ignition on or
whi le driving and the
RE indicator light in the in
strument cl uster b links for app roximately one
minute and then stays on, the re is system ma l
funct ion. Try to store the correct tire pressu res
¢
page 336. In some cases, yo u m ust dr ive fo r
severa l m inu tes after s toring the pressu res unt il
the indicator lig ht turns off . If the indica tor light
does not turn off or turns on agai n afte r a short
per io d of t ime, dr ive to a n author ized Audi dealer
o r auth o rized Aud i Serv ice F acili ty immedia tely to
have the mal func tion cor rected.
IJI.
335
<( a, .... N ,....
N .... 0 0
3 a,
avoid scratches, move the scraper only in
one direction and not back and forth.
- Never remove snow or ice from door win
dows and mirrors using warm or hot water
because this could cause cracks to form.
- To avoid damage to the rear window de
fogger, do not apply any stickers on the
heating wires on the inside of the window.
- Decorative part .s/trim
- Never use chrome care or cleaning prod-
ucts .
- Paint
- To reduce the risk of scratches, the vehicle
must be free of dirt and dust before pol
ishing or waxing .
- To prevent paint damage, do not polish or
wax the vehicle in direct sunlight .
- To reduce the risk of paint damage, do not
polish away rust spots.
- Remove cosmetics and sunscreen immedi
ately- these could damage the paint.
- Displays/instrument cluster
- The displays/instrument cluster and the
trim surrounding them must not be
cleaned with dry cleaning methods be
cause they could be scratched.
- Make sure that the instrument cluster is
switched off and has cooled off before
cleaning it.
- Make sure no fluids enter the spaces be
tween the instrument cluster and the
trim, because that could cause damage.
- Controls
- Make sure that no fluids enter the con-
trols, because this could cause damage.
- Safety belts
- Do not remove the safety belts to clean
them.
- Never clean safety belts or their compo
nents chemically or with corrosive fluids
or solvents and never allow sharp objects
to come into contact with the safety belts.
This could cause damage to the belt web bing.
- If there is damage to the webbing, the
connections, the retractors or the buckles,
Care and cleaning
have them replaced by an authorized Audi
dealer or authorized Audi Service Facility.
- Textiles/artificial leather/ Alcantara
- Never treat artificial leather/Alcantara
with leather care products, solvents, floor
polish, shoe polish, spot remove or similar
products.
- Have a specialist remove stubborn stains
to prevent damage.
- Never use steam cleaners, brushes, hard
sponges, etc . when cleaning.
- Do not turn on the seat heating* to dry the
seat .
- Objects with sharp edges, such as zippers
or rivets on clothing or belts, can cause
damage to the surface.
- Open hook and loop fasteners, for exam
ple on clothing, can damage seat covers .
Make sure hook and loop fasteners are
closed .
- Natural leather
- Never treat leather with solvents, floor
polish, shoe polish, spot remover or simi
lar products.
- Objects with sharp edges, such as zippers
or rivets on clothing or belts, can cause
damage to the surface .
- Never use steam cleaners, brushes, hard
sponges, etc. when cleaning.
- Do not turn on the seat heating* to dry the
seat.
- To help prevent the leather from fading,
do not leave the vehicle in direct sunlight
for long periods of time. If leaving the ve
hicle parked for long periods of time, you
should cover the leather to protect it from
direct sunlight.
(D Tips
- Insects are easier to remove from paint that
has been freshly waxed.
- Regular waxing can prevent rust spots from
forming.
341