2017 Alfa Romeo 4C radio

CavityVehicle Fuse
Number Mini Fuse
Description
10 F51 7.5 Amp Brown Headlamp Washer Relay, A/C Compressor Relay,
High Beam Relay, Parking ECU, Vehicle Radio,
Stop Lamp Switch
11 F37 7.5 Amp Brown Stop Light Switch, Instrument Panel Node
12 F49 5 Amp Tan Transmission Shifter Module, Cigar Lighter Light,
Drive Style Unit, Heated Mirrors Relay
13 F31 5 Amp Tan Climate Control, Body Controller
14 F47 20 Amp Yellow Driver Power Window
VEHICLE STORAGE
If you are leaving your vehicle dormant for more than
21 days, you may want to take these steps to protect
your battery.
•Disconnect the negative cable from the battery.
• Anytime you store your vehicle, or keep it out of
service (e.g., vacation) for two weeks or more, run the
air conditioning system at idle for about five minutes
in the fresh air and high blower setting. This will
ensure adequate system lubrication to minimize the
possibility of compressor damage when the system is
started again.
244 MAINTAINING YOUR VEHICLE

Recommendation...................214, 256
Viscosity ........................... .215
Oil Filter, Change ....................... .215
Oil Filter, Selection ...................... .215
Oil Pressure Light .........................96
Onboard Diagnostic System .................210
Operating Precautions .....................210
Operator Manual (Owner’s Manual) ............4
Outside Rearview Mirrors ...................64
Overheating, Engine ..................... .192
Owner’s Manual (Operator Manual) .........4,273
Paint Care ............................ .234
Parking Brake .......................... .148
Passing Light ............................72
Placard, Tire And Loading Information ......162, 163
Power Door Locks ...........................18
Mirrors ..............................64
Windows .............................20
Pregnant Women And Seat Belts ..............31
Pretensioners Seat Belts .............................32
Radial Ply Tires ........................ .169Radio Frequency
General Information ..................12, 17
Radio Operation ........................ .125
Reclining Front Seats ......................66
Recreational Towing ..................... .189
Reformulated Gasoline ....................184
Refrigerant ............................ .218
Reminder, Seat Belt ........................25
Remote Keyless Entry Remote Keyless Entry ....................14
Unlock The Doors ......................15
Replacement Bulbs ...................... .245
Replacement Keys ........................12
Replacement Parts ....................... .212
Replacement Tires ....................... .176
Reporting Safety Defects ...................272
Restraint, Head ..........................67
Restraints, Child ..........................46
Rotation, Tires ......................... .178
Safety Checks Inside Vehicle .................
57
Safety Checks Outside Vehicle ................59
Safety Defects, Reporting ...................272
Safety, Exhaust Gas ........................56
Safety Information, Tire ....................157
282 INDEX

INSTALLATION OF RADIO TRANSMITTING
EQUIPMENTSpecial design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.