2017.5 OPEL INSIGNIA BREAK engine

Technical data275Technical dataVehicle identification..................275
Vehicle Identification Number ..275
Identification plate ...................275
Engine identification ................276
Vehicle data ............................... 277
Recommended fluids and lubricants ................................ 277
Engine data ............................. 280
Performance ............................ 282
Vehicle weight ......................... 283
Vehicle dimensions .................283
Capacities ................................ 285
Tyre pressures ........................ 286Vehicle identification
Vehicle IdentificationNumber
The Vehicle Identification Number is
visible through the windscreen.
The Vehicle Identification Number
may be stamped on the identification
plate and on the floor pan, under the floor covering, visible under a cover,
or in the engine compartment on the
right body panel.
Identification plate
The identification label is located on
the front left or right door frame.

276Technical dataInformation on identification plate:1:manufacturer2:type approval number3:vehicle identification number4:permissible gross vehicle weight
rating in kg5:permissible gross train weight in
kg6:maximum permissible front axle
load in kg7:maximum permissible rear axle
load in kg8:vehicle-specific or country-
specific data, e.g. MY = model
year
The combined total of front and rear
axle loads must not exceed the
permissible gross vehicle weight. For
example, if the front axle is bearing its
maximum permissible load, the rear
axle can only bear a load that is equal
to the gross vehicle weight minus the front axle load.
The technical data is determined in
accordance with European
Community standards. We reserve
the right to make modifications.
Specifications in the vehicle
documents always have priority over
those given in this manual.
Engine identification
The technical data tables use the
engine identifier code. The engine
data table additionally shows the
engineering code. Engine data
3 280.
To identify the respective engine,
refer to the EEC Certificate of
Conformity provided with your vehicle
or other national registration
documents.
The Certificate of Conformity shows the engine identifier code, other
national publications may show the
engineering code. Check piston
displacement and engine power to
identify the respective engine.

Technical data277Vehicle dataRecommended fluids and lubricants
European service schedule Required engine oil qualityAll European countries with European service interval 3 271Engine oil qualityPetrol engines
(including CNG, LPG, E85)Diesel enginesdexos 1––dexos 2✔✔
In case dexos quality is unavailable you may use max. 1 litre engine oil quality ACEA C3 once between each oil change.
Engine oil viscosity grades
All European countries with European service interval 3 271Ambient temperaturePetrol and diesel enginesdown to -25 °CSAE 5W-30 or SAE 5W-40below -25 °CSAE 0W-30 or SAE 0W-40

278Technical dataInternational service schedule
Required engine oil qualityAll countries with international service interval 3 271Engine oil qualityPetrol engines
(including CNG, LPG, E85)Diesel enginesdexos 1 (if available)✔–dexos 2✔✔
In case dexos quality is unavailable you may use the oil qualities listed below:
All countries with international service interval 3 271Engine oil qualityPetrol engines
(including CNG, LPG, E85)Diesel enginesGM-LL-A-025✔–GM-LL-B-025–✔All countries with international service interval 3 271Engine oil qualityPetrol engines
(including CNG, LPG, E85)Diesel enginesACEA A3/B3✔–ACEA A3/B4✔✔

Technical data279All countries with international service interval 3 271ACEA C3✔✔API SM✔–API SN resource conserving✔–
Engine oil viscosity grades
All countries with international service interval 3 271Ambient temperaturePetrol and diesel enginesdown to -25 °CSAE 5W-30 or SAE 5W-40below -25 °CSAE 0W-30 or SAE 0W-40down to -20 °CSAE 10W-30 1)
or SAE 10W-40 1)1)
Permitted, but usage of SAE 5W-30 or SAE 5W-40 with dexos quality is recommended.

280Technical dataEngine dataEngine identifier codeB15XHLB15XHTSales designation1.51.5Engineering codeB15XHTB15XHTPiston displacement [cm3
]14901490Engine power [kW]103121at rpm56005600Torque [Nm]250250at rpm2000-41002000-4500Fuel typePetrolPetrolOctane rating RON 2)recommended9595possible9898possible9191Additional fuel type––2)
A country-specific label at the fuel filler flap can supersede the engine-specific requirement.

Technical data281Engine identifier codeB16DTEB16DTHB20DTHSales designation1.61.62.0Engineering codeB16DTEB16DTHB20DTHPiston displacement [cm3
]159815981956Engine power [kW]81100125at rpm35003500-40003750Torque [Nm]300320400at rpm1750-20002000-22501750-2500Fuel typeDieselDieselDiesel

282Technical dataPerformanceEngineB15XHLB15XHTMaximum speed [km/h]Manual transmission210/2133)222/2253)Automatic transmission–2183)
ECOEngineB16DTEB16DTHB20DTHMaximum speed [km/h]Manual transmission201/205 3)211226Automatic transmission–203–3)
ECO