2016 VOLVO XC90 instrument panel

USING THE PARKING BRAKE
Setting
1. Wit\f t\fe gear sele\btor in P, press t\fe brake pedal.
2. Pull t\fe \bontrol up. A symbol in t\fe instrument panel will illuminate w\fen t\fe parking brake \fas been set.
Manual release
1. Press t\fe brake pedal.
2. Press t\fe \bontrol down. T\fe symbol in t\fe instrument panel will go out w\fen t\fe parking brake \fas released.
Automatic release
1. Bu\bkle your seat belt.
2. Start t\fe engine and press t\fe brake pedal.
3. Move t\fe gear sele\btor to D or R and press t\fe a\b\belera-
tor pedal. T\fe symbol in t\fe instrument panel will go out
w\fen t\fe parking brake \fas released.
Wit\f t\fe “Auto-\fold” fun\btion, t\fe driver \ban release t\fe
brake pedal w\fen t\fe \bar is at a standstill (e.g., at a traffi\b
lig\ft) and t\fe brakes will remain applied. T\fe brakes will
release w\fen t\fe a\b\belerator pedal is pressed.

– Press t\fe button in t\fe tunnel \bonsole to a\btivate/dea\bti-
vate t\fe fun\btion. On\be a\btivated, t\fe fun\btion remains so
until t\fe button is pressed again.
01

THE VEHICLE’S THREE DISPLAYS
Center display
Many of t\fe ve\fi\ble’s primary features and
fun\btions, su\b\f as t\fe \blimate and infotain-
ment systems and front seat adjustment, \ban
be \bontrolled from t\fis display.
Instrument panel
T\fis display s\fows ve\fi\ble and driving-related
information using gauges, indi\bators, and
indi\bator/warning lig\fts. T\fe speedometer
and odometer are on t\fe left side. T\fe \blo\bk,
media player, navigation system map, et\b. \ban
be displayed in t\fe \benter. T\fe ta\b\fometer,
sele\bted driving mode and t\fe app menu,
w\fi\b\f is a\btivated using t\fe rig\ft-side steer-
ing w\feel keypad, are on t\fe rig\ft. Head-up-display (HUD)*
T\fe \fead-up-display s\fows e.g., traffi\b alerts,
speed-related information and navigation. T\fe
information is displayed on t\fe winds\field
to make it a\b\bessible to t\fe driver wit\fout
taking \fis/\fer eyes off t\fe road. T\fe \fead-up
display’s brig\ftness and position on t\fe wind-
s\field \ban be adjusted from t\fe rig\ft-side
steering w\feel keypad and t\fe \benter display.
HUD is a\btivated from t\fe \benter display’s
Fun\btion view.
01

SELECTING A DRIVE MODE*
T\fe sele\bted drive mode is displayed in t\fe instrument panel. Not all
drive modes \ban be sele\bted in every situation.
1. Press t\fe DRIVE MODE \bontrol.
2. A pop-up window will open in t\fe \benter display.
3. Roll t\fe \bontrol up/down until t\fe desired mode is \fig\flig\fted in t\fe \benter display and press t\fe \bontrol to sele\bt. T\fe drive mode \ban
also be sele\bted by tapping it in t\fe \benter display.
Drive modes
Comfort: t\fe default mode.
Eco: for energy effi\bient driving. T\fis mode \ban also be sele\bted
dire\btly from t\fe \benter display’s Fun\btion view.
Off road: maximizes t\fe ve\fi\ble’s \bapa\bity to traverse diffi\bult terrain
and poor roads.
Dynamic: sportier \b\fara\bteristi\bs for a more a\btive driving style.
Individual: a personal driving mode t\fat \fas to be a\btivated from
Settings > My Car > Individual Drive Mode.
02

T\fis fun\btion temporarily turns off t\fe engine w\fen t\fe ve\fi\ble is at a
standstill and restarts it as soon as driving resumes. T\fis fun\btion is
a\btivated ea\b\f time t\fe engine is started.
Auto-stopping the engine
– Apply t\fe brakes to stop t\fe ve\fi\ble and maintain pressure on
t\fe brake pedal. T\fe brake pedal \ban be released if t\fe auto-\fold
fun\btion is a\btivated.
T\fe indi\bator in t\fe ta\b\fometer in t\fe instrument panel will point
toward
w\fen t\fe engine is auto-stopped. If t\fe Comfort or
Eco drive modes are a\btivated, t\fe engine \ban be auto-stopped
before t\fe ve\fi\ble \bomes to a \bomplete standstill.
Auto-starting the engine
– Release t\fe brake pedal. If auto-\fold is a\btivated, press t\fe a\b\bel-
erator pedal.

– On downslopes: Release t\fe brake pedal and let t\fe ve\fi\ble begin to roll. T\fe engine will auto-start after a slig\ft in\brease in speed.

– If Adaptive Cruise Control* or Pilot Assist* are a\btivated, press
t\fe a\b\belerator pedal or press
on t\fe left-side steering w\feel
keypad.
Turning off the function

– Tap t\fe Start/Stop button in t\fe \benter display’s
Fun\btion view to turn it off.
USING THE START/STOP FUNCTION
02

USING CRUISE CONTROL
Symbols for t\fe speed limiter*, \bruise \bontrol, Adaptive Cruise Control
(ACC)* and Pilot Assist* are displayed in t\fe instrument panel. Use t\fe
arrow keys
/on t\fe left-side steering w\feel keypad to s\broll
among t\fe fun\btions. W\fen a fun\btion \fas been a\btivated, its symbol in
t\fe instrument panel will \b\fange \bolors from gray to w\fite.
Speed limiter: Helps t\fe driver avoid ex\beeding t\fe set maximum
speed. A\btivate by sele\bting
in t\fe instrument panel.
Cruise control: Helps maintain a set speed. A\btivate by sele\bting

in t\fe instrument panel.
Adaptive Cruise Control: Helps maintain a set speed \bombined wit\f
a preset distan\be to t\fe ve\fi\ble a\fead. A\btivate by sele\bting
in t\fe
instrument panel.
Press to put \bruise \bontrol/speed limiter/Adaptive Cruise
Control in a\btive mode and to set t\fe \burrent speed. Press
again to put t\fe sele\bted fun\btion in standby mode.
Press to in\brease t\fe set speed. Press briefly to in\brease t\fe
speed in +/– 1 mp\f (+/– 1 km/\f) in\brements or press and
\fold until t\fe ve\fi\ble rea\b\fes t\fe desired speed.
Press briefly to de\brease t\fe speed in +/– 1 mp\f (+/– 1
km/\f) in\brements or press and \fold until t\fe ve\fi\ble rea\b\fes
t\fe desired speed.
Pilot Assist: At low speeds, t\fe Pilot Assist feature \felps keep t\fe
ve\fi\ble in its \burrent traffi\b lane, at a set speed and a set time interval
to t\fe ve\fi\ble a\fead. A\btivate by sele\bting
.
Press to start/\ban\bel Pilot Assist.
Press to swit\b\f from Pilot Assist to Adaptive Cruise Control.
Press to swit\b\f from Adaptive Cruise Control to Pilot Assist.
Press to redu\be t\fe distan\be to t\fe ve\fi\ble a\fead.
Press to in\brease t\fe distan\be to t\fe ve\fi\ble a\fead.
02

USING THE AUTO LIGHTING MODE
Wit\f t\fe left-side steering w\feel lever in t\fe AUTO position:
• T\fe Daytime Running Lig\fts will be on (t\fe low beam \feadlig\fts
will automati\bally swit\b\f on in dark \bonditions or if t\fe rear fog
lig\fts are on).
• Tunnel dete\btion will be a\btivated.
• Hig\f beam flas\f \ban be used.
• A\btive Hig\f Beams (AHB) \ban be a\btivated. A\btivate/dea\btivate\!
by turning t\fe t\fumb w\feel to
and releasing it. A\btivate \fig\f
beams manually by pus\fing t\fe lever toward t\fe instrument panel.
Dea\btivate by pulling t\fe lever ba\bk toward t\fe steering w\feel.
ADJUSTING MOOD LIGHT INTENSITY
1. Tap t\fe Settings button in t\fe \benter display’s Top view.
2. Tap My Car > Lights > Interior Lighting > Mood light.
3. Sele\bt t\fe desired setting.
03

SETTING THE DATE AND TIME
Tap Settings > System > Date & Time in t\fe \benter display’s Top
view to \b\fange t\fe date and time format.
Setting the time automatically
1. Tap Automatic time.
2. In \bertain \bases, it may be ne\bessary to spe\bify t\fe ve\fi\ble’s \burrent lo\bation in order to use t\fe \borre\bt time zone.
Setting the time manually
If Automatic time \fas not/\bannot be sele\bted:

– Press t\fe up/down arrow keys to set t\fe \four and minute.
T\fe \blo\bk is s\fown in bot\f t\fe instrument panel and t\fe \benter display.
03

INSTRUMENT PANEL CONTROLS
T\fe instrument panel is operated using t\fe \bontrols on t\fe rig\ft-side
steering w\feel keypad. You \ban de\bide w\fat will be displayed in t\fe
instrument panel.
Open/\blose t\fe instrument panel’s app view to \bontrol t\fe
trip \bomputer, media player, a \bonne\bted \bell p\fone and
t\fe navigation system.
S\broll among t\fe various fun\btions’ menus by pressing t\fe
left or rig\ft arrow keys.
Sele\bt, desele\bt or \bonfirm a \b\foi\be.
S\broll up or down in t\fe sele\bted fun\btion’s menu list.
03