2016 TOYOTA PRIUS V reset

169
2. SETUP
PRIUS v_Navi_OM47B14U_(U)
15.06.04 12:24
PHONE
6
1Display the “Phone/Message Settings”
screen. (P.168)
2Select “Sound Settings” .
3Select the desired item to be set.
“Sound Settings” SCREEN
The call and ringtone volume can be
adjusted. A ringtone can be selected.
No.Function
Select to set the desired ringtone.
Select “-” or “+” to adjust the ring-
tone volume.
Select “-” or “+” to adjust the mes-
sage readout volume.
Select to set the desired incoming
SMS/MMS tone.
Select “-” or “+” to adjust the in-
coming SMS/MMS tone volume.
Select to set the desired incoming e-
mail tone.
Select “-” or “+” to adjust the in-
coming e-mail tone volume.
Select “-” or “+” to adjust the de-
fault volume of the other party’s
voice.
Select to reset all setup items.
INFORMATION
● Depending on the type of phone, certain
functions may not be available.

171
2. SETUP
PRIUS v_Navi_OM47B14U_(U)
15.06.04 12:24
PHONE
6
*: For PBAP compatible Bluetooth®
phones, this function is available when
“Automatic Transfer” is set to off.
(P.170)
■FOR PBAP COMPATIBLE
Bluetooth
® PHONES
1Select “Update Contacts from
Phone” .
Contacts are transferred automatically.
2Check that a confirmation screen is
displayed when the operation is com-
plete.
This operation may be unnecessary
depending on the type of cellular phone.
 Depending on the type of cellular phone,
OBEX authentication may be required
when transferring contact data. Enter
“1234” into the Bluetooth
® phone.
 If another Bluetooth
® device is connected
when transferring contact data, depending
on the phone, the connected Bluetooth
®
device may need to be disconnected.
 Depending on the type of Bluetooth
®
phone being connected, it may be neces-
sary to perform additional steps on the
phone.
*Select to delete contacts
from the contact list.175
Select to reset all setup
items.
INFORMATION
● Depending on the type of phone, certain
functions may not be available.
● Contact data is managed independently
for every registered phone. When one
phone is connected, another phone’s
registered data cannot be read.
No.FunctionPageUPDATE CONTACTS FROM
PHONE
Operation methods differ between
PBAP compatible and PBAP incom-
patible but OPP compatible Bluetooth
®
phones.
If your cellular phone is neither PBAP
nor OPP compatible, the contacts can-
not be transferred.

179
2. SETUP
PRIUS v_Navi_OM47B14U_(U)
15.06.04 12:24
PHONE
6
1Display the phone top screen.
(P.153)
2Select .
3Select “Settings” .
Select to set adding the vehicle signa-
ture to outgoing messages on/off.
Select to set updating message read
status on phone on/off.
Select to change the incoming SMS/
MMS display.
“Full Screen” : When an SMS/MMS
message is received, the incoming
SMS/MMS display screen is dis-
played and can be operated on the
screen.
“Drop-down” : When an SMS/MMS
message is received, a message is
displayed on the upper side of the
screen.
Select to change the incoming e-mail
display.
“Full Screen” : When an e-mail is re-
ceived, the incoming e-mail display
screen is the displayed and can be
operated on the screen.
“Drop-down” : When an e-mail is re-
ceived, a message is displayed on the
upper side of the screen.
Select to set display of messaging ac-
count names on the inbox tab on/off.
When set to on, messaging account
names used on the cellular phone will
be displayed.
Select to reset all setup items.
INFORMATION
● Depending on the phone, these func-
tions may not be available.
No.FunctionDISPLAYING THE “Messaging
Settings” SCREEN IN A
DIFFERENT WAY

180
2. SETUP
PRIUS v_Navi_OM47B14U_(U)
15.06.04 12:24
1Display the “Phone/Message Settings”
screen. (P.168)
2Select “Phone Display Settings” .
3Select the desired item to be set.
“Phone Display Settings”
SCREEN
No.Function
Select to change the incoming call
display.
“Full Screen”: When a call is re-
ceived, the hands-free screen is dis-
played and can be operated on the
screen.
“Drop-down” : A message is dis-
played on the upper side of the
screen.
Select to set display of the contact/
history transfer completion message
on/off.
Select to reset all setup items.
INFORMATION
● Depending on the phone, these func-
tions may not be available.

188
PRIUS v_Navi_OM47B14U_(U)
15.06.04 12:24
1. DESTINATION SEARCH SCREEN .................................... 207
2. SEARCH OPERATION . ............... 209
SELECTING SEARCH AREA .............. 210
SETTING HOME AS
DESTINATION .................................. 210
SETTING PRESET DESTINATIONS AS DESTINATION ............................ 210
SEARCHING BY ADDRESS ............... 211
SEARCHING BY POINT OF INTEREST......................................... 212
SEARCHING FROM PREVIOUS DESTINATIONS ................................ 215
SEARCHING BY ADDRESS BOOK .... 215
SEARCHING BY EMERGENCY.......... 216
SEARCHING BY INTERSECTION AND FREEWAY ................................ 216
SEARCHING BY MAP ......................... 218
SEARCHING BY COORDINATES ...... 218
3. STARTING ROUTE GUIDANCE ............... ................. 219
STARTING ROUTE GUIDANCE ......... 219
PAUSING GUIDANCE ......................... 222
1. ROUTE GUIDANCE SCREEN .... 223
SCREEN FOR ROUTE GUIDANCE .... 223
ROUTE OVERVIEW ............................ 224
DURING FREEWAY DRIVING ............ 225
WHEN APPROACHING
INTERSECTION ................................ 226
TURN LIST SCREEN ........................... 227
TURN-BY-TURN ARROW SCREEN ............................................ 227
2. TYPICAL VOICE GUIDANCE PROMPTS ................................. 228
3. EDITING ROUTE ......................... 229
ADDING DESTINATIONS .................... 230
REORDERING DESTINATIONS ......... 230
DELETING DESTINATIONS ................ 230
SETTING ROUTE PREFERENCES .... 231
SELECTING ROUTE TYPE ................. 231
DETOUR SETTING.............................. 232
STARTING FROM ADJACENT ROAD ................................................ 233
2DESTINATION SEARCH3ROUTE GUIDANCE

189
PRIUS v_Navi_OM47B14U_(U)
15.06.04 12:24
1
2
3
4
5
6
7
8
1. MEMORY POINTS SETTINGS .... 234
SETTING UP HOME ........................... 235
SETTING UP PRESET DESTINATIONS................................ 236
SETTING UP ADDRESS BOOK ......... 238
SETTING UP AREAS TO AVOID ........ 241
DELETING PREVIOUS DESTINATIONS................................ 243
1. DETAILED NAVIGATION SETTINGS ................................. 244
SCREENS FOR NAVIGATION
SETTINGS ........................................ 244
2. TRAFFIC SETTINGS ................... 248
SCREEN FOR TRAFFIC
SETTINGS ........................................ 248
AUTO AVOID TRAFFIC ...................... 249
MY TRAFFIC ROUTES ....................... 250
1. GPS (GLOBAL POSITIONING SYSTEM) .................... ............... 255
LIMITATIONS OF THE
NAVIGATION SYSTEM..................... 255
2. MAP DATABASE VERSION AND COVERED AREA ............. 258
MAP INFORMATION ........................... 258
ABOUT THE MAP DATA ..................... 259
4MEMORY POINTS
5SETUP
6TIPS FOR THE NAVIGATION
SYSTEM

208
2. DESTINATION SEARCH
PRIUS v_Navi_OM47B14U_(U)
15.06.04 12:24
No.FunctionPage
Select to search for a destination by address. 211
Select to search for a destination by point of interest. 212
Select to search for a destination from previously set destinations.215
Select to search for a destination from a registered entry in “Address
book”.215
Select to search for a destination by online database. 271
Select to search for a destination from emergency service points.216
Select to search for a destination by intersection or freeway entrance/
exit.216
Select to search for a destination by the last displayed map.218
Select to search for a destination by coordinates.218
Select to set a destination by home.210
Select to set a destination from preset destinations.210
Select to delete set destinations.230

210
2. DESTINATION SEARCH
PRIUS v_Navi_OM47B14U_(U)
15.06.04 12:24
1Display the “Destination” screen.
(P.209)
2Select “Address” , “Point of Interest”
or “Intersection & Freeway” .
3Select “Select State/Province” or
“Change State/Province” .
If a state (province) has not been selected
yet, “Select State/Province” is dis-
played.
4Select the desired state (province).
 To change countries, select the “United
States” , “Canada” or “Mexico” tab.
 For map database information and
updates: P. 2 5 8
1Display the “Destination” screen.
( P.209)
2Select “Go Home” .
The navigation system performs a search
for the route and the entire route map is
displayed. ( P.219)
1Display the “Destination” screen.
( P.209)
2Select any of the preset destination
buttons ( 1-5).
The navigation system performs a search
for the route and the entire route map is
displayed. ( P.219)
SELECTING SEARCH AREA
The selected state (province) can be
changed to set a destination from a
different state (province) by using
“Address”, “Point of Interest” or
“Intersection & Freeway” .
SETTING HOME AS
DESTINATION
To use this function, it is necessary to
register a home address. (P.235)
SETTING PRESET
DESTINATIONS AS
DESTINATION
To use this function, it is necessary to
register preset destinations to the
preset screen buttons (1-5). ( P.236)