2016 TOYOTA PRIUS parking brake

2
EV drive mode switch
Driving mode select switch
Seat heater switches
1
“ENGINE START STOP” button (Smart key)
Tilt and telescopic steering lock release lever
Parking brake
Hood lock release lever
Fuel tank door opener
Instrument cluster light control switch
Intelligent Parking Assist (IPA) switch
1
Vehicle Stability Control (VSC) OFF switch
Automatic High Beam (AHB) switch1
Color Head-up Display (HUD) switch1
1 If equipped2 For details, refer to the “Navigation System Owner’s Manual.”3 For details, refer to the “2016 Entune™ Audio Quick Reference Guide.”
“TRIP” switch
Steering wheel audio controls2,3
Meter control switches
Full-Speed Dynamic Radar Cruise Control (DRCC) vehicle-to-vehicle distance switch1
Full-Speed Dynamic Radar Cruise Control (DRCC)1/Cruise control switch
Lane Departure Alert (LDA) switch
Voice command button
2,3
Telephone control switches2,3
Headlight and turn signal controls/Headlight, turn signal and front fog light
controls1
Wiper and washer controls
Digital instrumentation
“P” position switch
Multi-Information Display (MID)
Shift lever
(mergency

SAFETY AND EMERGENCY FEATURES
TOYOTA SAFETY SENSE
FEATURES/OPERATIONS
OVERVIEW
3
EV drive mode switch
Driving mode select switch
Seat heater switches
1
“ENGINE START STOP” button (Smart key)
Tilt and telescopic steering lock release lever
Parking brake
Hood lock release lever
Fuel tank door opener
Instrument cluster light control switch
Intelligent Parking Assist (IPA) switch
1
Vehicle Stability Control (VSC) OFF switch
Automatic High Beam (AHB) switch1
Color Head-up Display (HUD) switch1
1
If equipped2 For details, refer to the “Navigation System Owner’s Manual.”3 For details, refer to the “2016 Entune™ Audio Quick Reference Guide.”
“TRIP” switch
Steering wheel audio controls2,3
Meter control switches
Full-Speed Dynamic Radar Cruise Control (DRCC) vehicle-to-vehicle distance switch1
Full-Speed Dynamic Radar Cruise Control (DRCC)1/Cruise control switch
Lane Departure Alert (LDA) switch
Voice command button
2,3
Telephone control switches2,3
Headlight and turn signal controls/Headlight, turn signal and front fog light
controls1
Wiper and washer controls
Digital instrumentation
“P” position switch
Multi-Information Display (MID)
Shift lever
(mergency

SAFETY AND EMERGENCY FEATURES
TOYOTA SAFETY SENSE
FEATURES/OPERATIONS
OVERVIEW
5
Main Display
Multi-Information Display (MID)
Clock Display
Transmission shift position indicator
Service indicators and reminders
3 If this light flashes, refer to “Cruise control,” or “Full-Speed Dynamic radar cruise control,”
Section 4-5, 2016 Owner’s Manual.
4 If equipped.
Anti-lock Brake System warning1
Low engine oil pressure warning1
Pre-collision System warning1,2,4
Turn signal indicator Intelligent Parking Assist
4
Slip indicator/Hill-start Assist
Control indicator1,2
Headlight low/
high beam indicator
Immobilizer system indicator
Blind Spot Monitor4
Electric power
steering system warning1
Automatic High Beams1,4
READY indicator
S-APGS indicator4
Front fog light indicator4
ECO Mode indicator
EV Drive Mode indicator
1
If indicator does not turn off within a few seconds of starting hybrid system, there may be a
malfunction. Have vehicle inspected by your Toyota dealer.
2 The light flashes to indicate a malfunction.
For details, refer to “Indicators and warning lights,” Section 2, 2016 Owner’s
Manual .
Cruise control indicator3/
Full-Speed Dynamic Radar Cruise Control3,4
High coolant temperature warning light1
Power Mode indicator
EV indicator
Intelligent Clearance Sonar (ICS)
OFF indicator1,2,4
Parking brake indicator
Shift position indicators
VSC OFF indicator1
Lane Departure Alert indicator4
Steering Assist indicator4
Smart key system
Brake Overrride System/Drive-Start control/Intelligent
Clearance Sonar4
Lane Departure Alert (LDA) with Steering Assist4
Lane Departure Alert (LDA) Sway Control4
Arrow direction indicates fuel
tank door position
134261_Prius_QRG_GUTS.indd 512/18/15 1:30 PM

6
OVERVIEW
Keyless entry
Push
Push ONCE: Driver door
TWICE: All doors
Locking operation
Unlocking operation
Smart Key System (if equipped)
Start function
Panic button
Push and hold
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock
for safety.
* Driver door unlocking function can be programmed to unlock driver door only, or all doors. Grasping passenger door handle or pushing unlock button on rear hatch
will unlock all doors. (If equipped)
NOTE: Fuel consumption and energy information of the hybrid system are
shown on the Dual Multi-Information Displays
p 160
p 161
Back door lock/unlock (if equipped)
Carry remote to
lock/unlock
Unlocking
Carry remote to unlock
Without depressing the brake pedal, pressing the “POWER” switch will change the
operation mode in succession from:
Power modes (without starting Hybrid System)
When starting the hybrid system, make sure you are carrying the Smart key, the
parking brake is set and shift position is in P.
134261_Prius_QRG_GUTS.indd 612/18/15 1:30 PM

12
FEATURES/OPERATIONS
Hold wheel, push lever down, set angle and length, and return lever.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Tilt and telescopic steering wheel
AngleLock release lever
Parking brake
Set: Depress
Release: Depress again
Seats-Head restraints (if equipped)
Front
Lock release button
Seat-Folding down rear seat
Seat adjustments-Front
Seat position (forward/backward)
Height crank (driver side only)
Seatback angle
Seat position, cushion angle and height
Lumbar support
Manual seat
Length
The VSC OFF switch can be used to help free a stuck vehicle in surroundings like
mud, dirt or snow. While car is stopped, press switch to disable the TRAC system.
To disable both VSC and TRAC systems, press the switch for at least 3 seconds.
Refer to the Owner’s Manual for more details.
Push
Vehicle Stability Control (VSC)/TRAC OFF switch
134261_Prius_QRG_GUTS.indd 1212/18/15 1:30 PM

22
FEATURES/OPERATIONS
Intelligent Parking Assist (IPA)
(if equipped)
When the sensors detect an obstacle, the buzzer and MID display informs the
driver of the approximate position and distance of the obstacle by illuminating
continuously (far) or blinking (near).
Note: Use
in the Multi-Information Display (MID) to change settings. The
system will continue in the last state it was in (ON or OFF) when the engine is
started again.
Refer to section S-APGS (Simple Advanced Parking Guidance System) in the
Owner’s Manual for more details.
Corner sensors (front and rear)
Side sensors (front and rear)
pg 544
pg 554
Rear view monitor system
The rear view monitor system displays an image of the view from the bumper
of the rear area of the vehicle. The camera for the rear view monitor system is
located above the license plate.
To adjust the image on the rear view monitor screen, press the “SETUP” button
and select “Display” on the “Setup” screen. Select “Camera” to adjust the
screen contrast and brightness.
Refer to the Owner‘s Manual for more details on this system.
Cruise control
1 The set speed may also be cancelled by depressing the brake pedal.2 The set speed may be resumed once vehicle speed exceeds 25 mph.
Turning system ON/OFF
Functions
System ON/OFF
Increase speed
Decrease speed
Cancel1
Resume2
Set
Clock
To adjust the time, use meter control switches to go to the screen on the MID.
Then, select the
option to access the clock setting.
134261_Prius_QRG_GUTS.indd 2212/18/15 1:31 PM

SAFETY AND EMERGENCY FEATURES
TOYOTA SAFETY SENSE
FEATURES/OPERATIONS
OVERVIEW
23
Intelligent Parking Assist (IPA)
(if equipped)
When the sensors detect an obstacle, the buzzer and MID display informs the
driver of the approximate position and distance of the obstacle by illuminating
continuously (far) or blinking (near).
Note: Use
in the Multi-Information Display (MID) to change settings. The
system will continue in the last state it was in (ON or OFF) when the engine is
started again.
Refer to section S-APGS (Simple Advanced Parking Guidance System) in the
Owner’s Manual for more details.
Corner sensors (front and rear)
Side sensors (front and rear)
Front
center sensor
Rear
center sensor
pg 359
Rear view monitor system
The rear view monitor system displays an image of the view from the bumper
of the rear area of the vehicle. The camera for the rear view monitor system is
located above the license plate.
To adjust the image on the rear view monitor screen, press the “SETUP” button
and select “Display” on the “Setup” screen. Select “Camera” to adjust the
screen contrast and brightness.
Refer to the Owner‘s Manual for more details on this system.1 The set speed may also be cancelled by depressing the brake pedal.2 The set speed may be resumed once vehicle speed exceeds 25 mph.
Increase speed
To adjust the time, use meter control switches to go to the screen on the MID.
Then, select the
option to access the clock setting.
134261_Prius_QRG_GUTS.indd 2312/18/15 1:31 PM

24
Intelligent Clearance Sonar (if equipped)
When parking, this available system scans for stationary objects, like walls or
lampposts. Should the system anticipate a collision, it will emit an audible and
visible alert, reduce engine or motor output, and automatically apply the brakes if
needed. And with advanced side-colllision detection, Prius can help you get in and
out of parking spots with plenty of room to spare.
FEATURES/OPERATIONS
pg 346
Change settings
Refer to the Owner‘s Manual for more details on this system.
System ON/OFF on
the multi-information
display.
Blind Spot Monitor (BSM) with Rear
&ross Traf