2016 TOYOTA LAND CRUISER sensor

OVERVIEWFEATURES/OPERATIONS TOYOTA SAFETY SENSESAFETY AND EMERGENCY FEATURES
1
2016
Land Cruiser
INDEX
Engine maintenance 9
Fuel tan k door release and cap 8
Hood release 8
Indicator symbols 4-5
Instrument cluster 4
Instrument panel 2-3
Keyless entry1 6
Light control-Instrument panel 9
Smart Key system1,2 7
1 Visit your Toyota dealer for information on customizing this feature.2 Programmable by customer. Refer to the Owner’s Manual for instructions and more information.3 HomeLink® is a registered trademark of Gentex Corporation.
OVERVIEW
FEATURES/OPERATIONS
FEATURES/OPERATIONS
TOYOTA SAFETY SENSE
Automatic air
conditioning/heating 20-21
Entune™ Audio 18-19
Auto lock/unlock1 10
Automatic Transmission 10
Back doo
r
19
Bluetooth® Device
Pairing Section 43-52
Cooler box 26
Crawl Control 22
Cup holders 26
Door locks 24
Four-wheel drive 11
Garage door

opener (HomeLink
®)3 25
Lights1 & turn signals 15
Moon roof 17
Multi-Information Display (MID)2 23
Multi-terrain Monitor 22
Parking brake 26
Power outlets-12V DC 26
Power outlet-120V AC 27
Qi wireless char

ger
27
Rear sea

t entertainment system
25
Rear view mirro

r-Outside
17
Seat adjustments-Front 12
Seat adjustments-Rear 12
Seat ven

tilators/heaters
21
Seats-Head restraints 12
Seats-Tumbling second

row seats
13
Seats-Tumbling third row seats 14
Steering lock release 11
Telephone controls (Bluetooth®) 24Tilt and telescopic steering wheel 23
Windows-Power 16
Windshield
wipers & washers
16
Auto High Beams (AHB) 36-37
Dynamic Radar
Cruise
Control (DRCC)
34-36
Lane De

parture Alert (LDA)
31-33
Pedestrian detection

function
31
Pre-Collision System (PCS) 29-30
Quick ov

erview-
Toyota Safety Sense P
28
Sensors 28
Doors-Child safety locks 39
Floor mat installation 41
Seat belts 38
Seat belts-Shoulder

belt anchor
38
Spare tire

& tools
39
Star Safety

System
TM 40
Tire Pressure Monitoring
(warning) System
38
SAFETY AND EMERGENCY FEATURES
2016_LandCruiser_QRG.indd 19/4/15 7:31 PM

16
Windshield wipers & washers
FEATURES/OPERATIONS
Windows-Power
Up
Down
Driver sideWindow lock switch
Automatic operation Push the switch completely down or pull it completely up
and release to fully open or close. To stop window midway, lightly push \
the switch
in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window remains
operable.
Front
Rear
Intermittent
Normal
Adjust sensor sensitivity2
Pull to wash and wipe
Push to wash
and wipe
Single wipe
Auto wipe
Slow
Fast
1 Intermittent windshield wiper frequency adjustment
Rotate to increase/decrease wipe frequency.
2 Rain-sensing windshield wiper Rotate to increase/decrease sensor sensitivity.
With intermittent wiper
With AUTO rain-sensing wiper
Pull to wash
and wipe
Single wipe
Interval wipe
Slow
Fast
Adjust
frequency1
Turn end
to activate

28
Quick overview-Toyota Safety Sense P
Toyota Safety Sense (TSS) P is a set of active safety technologies des\
igned to
help prevent or mitigate collisions across a wide range of traffic situa\
tions. TSS P
is designed to help support the driver’s awareness, decision making a\
nd vehicle
operation contributing to a safe and comfortable driving experience.
TOYOTA SAFETY SENSE
Pre-Collision System (PCS)
Provides collision avoidance or damage mitigation
support in speed ranges where rear end collisions are
likely to occur.
Lane Departure Alert (LDA)
Provides notification regarding the risk of unintended
lane departure.
Auto High Beams (AHB)
Vehicle detects lights of leading or opposing vehicles
and automatically changes between high and low beam
headlight settings.
Pedestrian Detection Function
Advanced sensor system helps to recognize pedestrians
and provide collision avoidance support and/or damage
mitigation.
Dynamic Radar Cruise Control (DRCC)
Follows the car in front maintaining distance
between vehicles up to a set speed.
Refer to the Owner’s Manual for more details to understand these functions
and complete safety precautions before attempting to use any of TOYOTA
SAFETY SENSE P functions.
Sensors
Two types of sensors, located behind the front grille and windshield, de\
tect
information necessary to operate the drive assist systems. The single-le\
ns camera
in front of the inside rear view mirror recognizes certain shapes and vi\
sible white
or yellow lane markings.

Radar sensor
Camera sensor

29
OVERVIEWFEATURES/OPERATIONS TOYOTA SAFETY SENSESAFETY AND EMERGENCY FEATURES

Pre-Collision System (PCS)
The Pre-Collision System uses a radar sensor and camera sensor to help d\
etect
vehicles and pedestrians in front of your vehicle. If the system determi\
nes that
the possibility of a frontal collision with a vehicle or pedestrian is h\
igh, the system
warns the driver to take evasive action while the potential brake pressu\
re is
increased to help the driver avoid collision or reduce the impact to the\
vehicle and
it’s occupants.
Note: PCS is enabled each time the engine switch is turned to Ignition On. Th\
e
system can be disabled/enabled and the warning timing of the system can \
be
changed.
Pre-collision warning
When the system determines that the possibility of a frontal collision i\
s high,
a buzzer will sound and a warning message will be displayed on the Multi\
-
Information Display (MID) to urge the driver to take evasive action.
Pre-collision brake assist
When the system determines that the possibility of a frontal collision i\
s high, the
system applies greater braking force in relation to how strongly the bra\
ke pedal is
depressed.
Pre-collision braking
When the system determines that the possibility of a frontal collision i\
s high, the
system warns the driver. If the system determines that the possibility o\
f a collision
is extremely high, the brakes are automatically applied to help avoid th\
e collision
or reduce the collision speed.

31
OVERVIEWFEATURES/OPERATIONS TOYOTA SAFETY SENSESAFETY AND EMERGENCY FEATURES
Monocular camera sensor
Millimeter
wave radar
As part of the Pre-Collision System, this function is also designed to f\
irst provide
an alert and then automatic braking if needed.
Pedestrian Detection Function
The Pre-Collision System also features a pedestrian detection function. \
Using
a millimeter wave radar and monocular camera sensor, this advanced senso\
r
system can recognize pedestrians in some circumstances. It may provide d\
etection
capability while driving at low as well as higher speeds.
Press the LDA switch to turn the LDA system on. Depress again to turn it\
off.
Note: The system will continue in the last state it was in (ON or OFF) when\
the
engine is started again.
Turning on the LDA system
The Lane Departure Alert system recognizes visible white or yellow lane \
markers
via a camera sensor. The system alerts the driver with a warning buzzer \
sound
and message in the Multi-Information Display (MID) when it detects the\
vehicle
deviating from or swaying multiple times within its lane.
Lane Departure Alert (LDA)

To change the vehicle-to-
vehicle distance

Push the “
” button
to cycle through the
settings, which will change
progressively.
LONG (default setting)
MIDDLE
SHORT
35
OVERVIEW FEATURES/OPERATIONS TOYOTA SAFETY SENSESAFETY AND EMERGENCY FEATURES
Preceding
vehicle mark
(1) (2) (3)
This mode employs a radar sensor to detect the presence of vehicles up t\
o
approximately 400ft (120m) ahead, determines the current vehicle-to-ve\
hicle
following distance and operates to maintain a suitable following distanc\
e from the
vehicle ahead.
(1)
Constant speed cruising when there are no vehicles ahead
The vehicle travels at the speed set by the driver. The desired vehicle-\
to-
vehicle distance can also be set by operating the vehicle-to-vehicle dis\
tance
control.
(2) Deceleration cruising and follow-up cruising when a preceding vehicle
driving slower than the set speed appears When a vehicle is detected running ahead of you, the system automaticall\
y
decelerates your vehicle. When a greater reduction in vehicle speed is
necessary, the system applies the brakes (the stop lights will come on \
at this
time). The system will respond to changes in the speed of the vehicle a\
head in
order to maintain the vehicle-to-vehicle distance set by the driver. A w\
arning
tone warns you when the system cannot decelerate sufficiently to prevent\
your
vehicle from closing in on the vehicle ahead.
Note:
Vehicle-to-vehicle distance will close in when traveling on long downhi\
ll
slopes.
Adjusting distance

36
The AHB uses an in-vehicle camera sensor to assess the brightness of str\
eetlights,
the lights of oncoming and preceding vehicles, etc., and automatically t\
urns high
beam on or off as necessary.
Auto High Beams (AHB)
(1)
(2)
Switching to constant speed control mode
(3) Acceleration when there are no longer any preceding vehicles driving
slower than the set speed The system accelerates until the set speed is reached. The system then
returns to constant speed cruising.
Note: When your vehicle is too close to a vehicle ahead, and
sufficient automatic deceleration via the cruise control is not
possible, the display will flash and the buzzer will sound to alert the \
driver. An example of this would be if another driver cuts in front of
you while you are following a vehicle. Depress the brake pedal to
ensure an appropriate vehicle-to-vehicle distance.
Note: When the engine is turned off, it will automatically default to DRCC.
TOYOTA SAFETY SENSE
If you are already using DRCC “”, push ON-OFF button to turn the system off
first, then push and hold ON-OFF button for at least 1.5 seconds to swit\
ch.