Page 173 of 356
173
5
Interior features
Scion iM_U (12J49U)
5-2. Using the interior lights
Vanity lights (P. 175)
Front interior/front personal lights ( P. 174)
Rear interior light ( P. 175)
Interior li ghts list
1
2
3
Page 174 of 356
1745-2. Using the interior lights
Scion iM_U (12J49U)n
Front interior light
Door position on
Off
nFront personal lights
On/off
When the lights are on due to
the door link switch, a light will
not turn off even if its lens is
pressed.
Front interior light/front personal lights
1
2
Page 175 of 356
1755-2. Using the interior lights
5
Interior features
Scion iM_U (12J49U)
On
Door position
Off
On
Off
nIlluminated entry system
When the interior light switch is in the door position, the interior lights auto-
matically turn on/off according to the engine switch position, whether the
doors are locked/unlocked and whether the doors are open/closed.
n To prevent battery discharge
The following lights will turn off automatically after 20 minutes:
lFront interior/front personal lights
l Rear interior light
l Luggage compartment light
l Vanity lights
n Customization
Settings (e.g. the time elapsed before lights turn off) can be changed.
(Customizable features: P. 319)
Rear interior light
1
2
3
Vanity lights
1
2
Page 192 of 356

1926-1. Maintenance and care
Scion iM_U (12J49U)
NOTICE
nTo prevent paint deterioration and corrosion on the body and compo-
nents (aluminum wheels etc.)
l Wash the vehicle immediately in the following cases:
• After driving near the sea coast
• After driving on salted roads
• If coal tar or tree sap is present on the paint surface
• If dead insects, insect droppings or bird droppings are present on the
paint surface
• After driving in an area contaminated with soot, oily smoke, mine dust, iron powder or chemical substances
• If the vehicle becomes heavily soiled with dust or mud
• If liquids such as benzene and gasoline are spilled on the paint surface
l If the paint is chipped or scratched, have it repaired immediately.
l To prevent the wheels from corroding, remove any dirt and store in a place
with low humidity when storing the wheels.
n Cleaning the exterior lights
lWash carefully. Do not use organic substances or scrub with a hard brush.
This may damage the surfaces of the lights.
l Do not apply wax to the surfaces of the lights.
Wax may cause damage to the lenses.
n To prevent damage to the windshield wiper arms
When lifting the wiper arms away from the windshield, pull the driver side
wiper arm upward first, and then the passenger side. When returning the
wipers to their original position, do so from the passenger side first.
n When using a high pressure car wash
Do not bring the nozzle tip close to boots (rubber or resin manufactured
cover), connectors or the following parts. The parts may be damaged if they
come into contact with high-pressure water.
• Traction related parts
• Steering parts
• Suspension parts
• Brake parts
Page 200 of 356
2006-2. Maintenance
Scion iM_U (12J49U)
Head restraints• Do the head restraints movesmoothly and lock securely?
Indicators/buzzers• Do the indicators and buzzersfunction properly?
Lights • Do all of the lights come on?
Parking brake
• Does the parking brake move smoothly?
• When parked on a slope and the parking brake is on, is the vehicle
securely stopped?
Seat belts
• Do the seat belts operate
smoothly?
• The seat belts should not be dam- aged.
Seats• Do the seat controls operate prop-erly?
Steering wheel
• Does the steering wheel rotatesmoothly?
• Does the steering wheel have the correct amount of free play?
• There should not be any strange
sounds coming from the steering
wheel.
ItemsCheck points
Page 241 of 356
2416-3. Do-it-yourself maintenance
6
Maintenance and care
Scion iM_U (12J49U)
nAfter a fuse is replaced
lIf the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. ( P. 242)
l If the replaced fuse blows again, have the vehicle inspected by your Scion
dealer.
n If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
WARNING
nTo prevent system breakdowns and vehicle fire
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
lNever use a fuse of a higher amperage rating than that indicated, or use\
any other object in place of a fuse.
l Always use a genuine Scion fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
l Do not modify the fuses or fuse boxes.
NOTICE
nBefore replacing fuses
Have the cause of electrical overload determined and repaired by your
Scion dealer as soon as possible.
Page 242 of 356
2426-3. Do-it-yourself maintenance
Scion iM_U (12J49U)
Check the wattage of the light bulb to be replaced. (P. 302)
nFront
Light bulbs
You may replace the following bulb s yourself. The difficulty level
of replacement varies depending on the bulb. If necessary bulb
replacement seems difficult to perform, contact your Scion
dealer.
For more information about repl acing other light bulbs, contact
your Scion dealer.
Preparing for light bulb replacement
Bulb locations
Headlights
Front turn signal lights
Front side marker lights1
2
3
Page 243 of 356
2436-3. Do-it-yourself maintenance
6
Maintenance and care
Scion iM_U (12J49U)n
Rear
nHeadlights
Remove the securing clip
and pull out the washer fluid
filler opening. (When replac-
ing right side bulb only.)
Remove the cover.
Back-up lights
Stop lights
Rear turn signal lights
License plate lights
Replacing light bulbs
1
2
3
4
1
2