2016 TOYOTA iM seats

621-1. For safe use
Scion iM_U (12J49U)
Adjust the head restraint to the uppermost position. (P. 98)
If your child restraint system interferes with a head restraint and cannot be
installed properly, install the child restraint system after removing the head
restraint. ( P. 99)
Secure the child restraint sys-
tem using the seat belt or
LATCH anchors.
Remove the luggage cover. ( P. 183)
Latch the hook onto the anchor
bracket and tighten the top
tether strap.
Run the top tether strap under the
head restraint.
Make sure the top tether strap is
securely latched.
Outboard rear seats only: Adjust the head restraint to the lowest
position. ( P. 98)
If your child restraint system interferes with a head restraint and cannot be
installed properly, remove the head restraint. ( P. 99)
Child restraint systems with a top tether strap
1
2
3
4
5

83
3
Operation of
each component
Scion iM_U (12J49U) 3-1. Key information
Keys .................................... 84
3-2. Opening, closing and locking the doors
Side doors ........................... 88
Back door ............................ 91
3-3. Adjusting the seats Front seats .......................... 95
Rear seats........................... 96
Head restraints.................... 98
3-4. Adjusting the steering wheel and mirrors
Steering wheel .................. 101
Inside rear view mirror ...... 103
Outside rear view mirrors ............................. 104
3-5. Opening and closing the windows
Power windows ................. 106

903-2. Opening, closing and locking the doors
Scion iM_U (12J49U)
The door cannot be opened from
inside the vehicle when the lock is
set.Unlock
Lock
These locks can be set to prevent
children from opening the rear
doors. Push down on each rear
door switch to lock both rear doors.
nOpen door warning buzzer
If a door or the back door is not fully closed, a buzzer will sound when the
vehicle speed reaches 3 mph (5 km/h).
The open door(s) or back door is indicated on the multi-information display.
n Conditions affecting the operatio n of the wireless remote control
P. 8 5
n Customization
Settings (e.g. unlocking function using a key) can be changed.
(Customizable features: P. 319)
Rear door child-protector lock
1
2
WARNING
nTo prevent an accident
Observe the following precautions while driving the vehicle.
Failure to do so may result in a door opening and an occupant falling out,
resulting in death or serious injury.
lEnsure that all doors are properly closed and locked.
l Do not pull the inside handle of the doors while driving.
Be especially careful for the front doors, as the doors may be opened
even if the inside lock buttons are in locked position.
l Set the rear door child-protector locks when children are seated in the rear
seats.

95
3
Operation of each component
Scion iM_U (12J49U)
3-3. Adjusting the seats
Front seats
Adjustment procedure
Seat position adjustment lever
Seatback angle adjustment
lever Vertical height adjustment
lever (driver’s side only)
WARNING
n
When adjusting the seat position
lTake care when adjusting the seat position to ensure that other passen-
gers are not injured by the moving seat.
l Do not put your hands under the seat or near the moving parts to avoid
injury.
Fingers or hands may become jammed in the seat mechanism.
l Make sure to leave enough space around the feet so they do not get stuck.
n Seat adjustment
lBe careful that the seat does not hit passengers or luggage.
l To reduce the risk of sliding under the lap belt during a collision, do not
recline the seat more than necessary.
If the seat is too reclined, the lap belt may slide past the hips and apply
restraint forces directly to the abdomen, or your neck may contact the
shoulder belt, increasing the risk of death or serious injury in the event of
an accident.
Adjustments should not be made while driving as the seat may unexpect-
edly move and cause the driver to lose control of the vehicle.
l After adjusting the seat, make sure that the seat is locked in position.
1
2
3

963-3. Adjusting the seats
Scion iM_U (12J49U)
Move the front seats forward. (P. 95)
Stow the rear armrest. ( P. 186)
Stow the rear center seat belt
buckle.
Lower the rear center seat head restraint to the lowest position.
(  P. 98)
Fold the rear outside seat head restraints. ( P. 98)
Pull the seatback lock release
lever and fold the seatback
down.
Each seatback may be folded sep-
arately.
Rear seats
The seatbacks of the rear seats can be folded down.
Folding down the rear seatbacks
1
2
3
4
5
6

973-3. Adjusting the seats
3
Operation of each component
Scion iM_U (12J49U)
WARNING
Observe the following precautions. Failure to do so may result in death or
serious injury.
nWhen folding the rear seatbacks down
lDo not fold the seatbacks down while driving.
l Stop the vehicle on level ground, set the parking brake and shift the shift
lever to P (continuously variable transmission) or N (manual transmission).
l Do not allow anyone to sit on a folded seatback or in the luggage compart-
ment while driving.
l Do not allow children to enter the luggage compartment.
l Do not allow anyone to sit on the rear center seat if the rear right seat is
folded down, as the seat belt buckle for the rear center seat belt is th\
en
concealed under the folded seat and cannot be used.
l Be careful not to get your hand caught when folding the rear seatbacks.
l Adjust the position of the front seats before folding down the rear seat-
backs so that the front seats do not interfere with the rear seatbacks when
folding down the rear seatbacks.
n After returning the rear seatback to the upright position
lMake sure that the seatback is securely
locked in position by lightly rocking it
back and forth.
If the seatback is not securely locked,
the red marking will be visible on the
seatback lock release knob. Make sure
that the red marking is not visible.
l Check that the seat belts are not twisted
or caught in the seatback.
If the seat belt gets caught between the
seatback’s securing hook and latch, it
may damage the seat belt.

983-3. Adjusting the seats
Scion iM_U (12J49U)
Up
Pull the head restraints up.
Down
Push the head restraint down while
pressing the lock release button.
Setting up the rear outside seat
head restraints
Fold back the head restraint and
then push it down to the lock posi-
tion.
Folding the rear outside seat
head restraints
Pull the head restraint up while
pressing only the right-side lock
release button and then fold it for-
ward.
Head restraints
Head restraints are provided for all seats.
Front seats and rear center seat
Lock release button
1
2
Rear outside seats
Lock release
button
1
2

993-3. Adjusting the seats
3
Operation of each component
Scion iM_U (12J49U)
nRemoving the head restraints
Front seats and rear center seat
Rear outside seats
n Installing the head restraints
Front seats
Rear center seat
Pull the head restraint up while pressing
the lock release button.
Pull the head restraint up while pressing
the lock release buttons.
Align the head restraint with the installa-
tion holes and push it down to the lock
position.
Press and hold the lock release button
when lowering the head restraint.
Align the head restraint with the installa-
tion holes and push it down to the lowest
lock position while pressing the lock
release button.
Lock release button
Lock release buttons
Lock release button
Lock release button