Driver’s Floor Mat
>Only use the driver’s floor mat
designed specifically for the model
and model year of your vehicle.
>Always properly secure the driver’s
floor mat using the retaining hooks.
>Never install another floor mat on
top of the existing driver’s floor mat.
>Never install the driver’s floor mat
upside down.
Emission Hoses and Tubes
Visually inspect for corrosion, damage,
cracks, and loose or leaking
connections. Tighten connections or
replace parts as necessary.
Engine Air Filter
Inspect or replace at specified
intervals. When performing
inspections, check for damage,
excessive wear and oiliness, and
replace if necessary.
Engine Coolant
NOTE: Initial replacement is at
120,000 miles/120 months. Replace
every 60,000 miles/60 months
thereafter.
Drain the cooling system and refill with
the coolant specified by Scion for your
vehicle. Inspect hoses and connections
for corrosion and leaks. Tighten
connections and replace parts when
necessary. A qualified technician
should perform these operations.
Engine Oil and Oil Filter
Replace the oil filter and drain and
refill the engine oil at specified
intervals. For recommended oil grade
and viscosity, refer to the
Owner’s
Manual.
Your vehicle is equipped with 0W-20
synthetic oil which allows for extended
oil change intervals and optimum fuel
economy. It is recommended that
Toyota Genuine 0W-20 Motor Oil be
used during scheduled oil changes. For
normal operating conditions, Scion
recommends changing your oil and
filter every 7,500 miles or 6 months,
whichever occurs first. For special
operating condition maintenance
recommendations, refer to page 35 of
this publication.
Exhaust Pipes and Mountings
Visually inspect the exhaust pipes,
muffler and hangers for cracks,
deterioration and damage. Start the
engine and listen carefully for any
exhaust gas leakage. Tighten
connections or replace parts as
necessary.
Fuel Lines and Connections,
Fuel Tank Band and Fuel Tank
Vapor Vent System Hoses
Visually inspect for corrosion, damage,
cracks, and loose or leaking
connections. Tighten connections or
replace parts as necessary.
EXPLANATION OF MAINTENANCE ITEMS Maintenance Log
45
MAINTENANCE
