2016 TOYOTA HIGHLANDER navigation system

214
HIGHLANDER_Navi_U
3. INTUITIVE PARKING ASSIST
1. INTUITIVE PARKING ASSIST*
Rear corner sensors
Rear center sensors
1Turns the intuitive parking assist on/off
When on, the indicator light comes on to
inform the driver that the system is opera-
tional.
■MULTI-INFORMATION DISPLAY
Rear corner sensors operation
Rear center sensors operation
■SCREEN DISPLAY
A simplified image is displayed on the
right upper corner of the screen when an
obstacle is detected. ( P.200)
The distance to obstacles measured
by the sensors is communicated via
the display and a buzzer when parallel
parking or maneuvering into a garage.
Always check the surrounding area
when using this system.
TYPES OF SENSORS
INTUITIVE PARKING ASSIST
SWITCH
*: If equipped
DISPLAY
When the sensors detect an obstacle,
the graphic is shown on the multi-infor-
mation display and navigation display
according to position and distance to
the obstacle.

239
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
HIGHLANDER_Navi_U
PHONE
7
■EDITING QUICK REPLY MESSAG-
ES
1Select “Quick Message” .
2Select corresponding to the de-
sired message to edit.
3Select “OK” when editing is complet-
ed.
*: Entune Premium Audio only
■CALLING FROM E-MAIL/SMS/MMS
MESSAGE DISPLAY
1Display the message inbox screen.
(P.236)
2Select the desired message.
3Select .
 If there are 2 or more phone numbers,
select the desired number.
4Check that the “Call” screen is dis-
played.
This operation cannot be performed
while driving.
INFORMATION
●To reset the editquick reply messages,
select “Default” .
● “Quick Message 1” (“I am driving and
will arrive in approximately [ETA]
minutes.”)*:
This message cannot be edited and will
automatically fill in [ETA] with the
navigation calculated estimated time of
arrival on the confirm message screen.
If there are waypoints set, [ETA] to the
next waypoint will be shown.
If there is no route currently set in the
navigation system, “Quick Message 1”
cannot be selected.
CALLING THE MESSAGE
SENDER
Calls can be made to an e-mail/SMS/
MMS message sender’s phone num-
ber.
This operation can be performed while
driving.

260
HIGHLANDER_Navi_U
1. QUICK REFERENCE ................... 262
MAP SCREEN ..................................... 262
NAVIGATION OPTIONS SCREEN...... 264
2. MAP SCREEN OPERATION ....... 265
CURRENT POSITION DISPLAY ......... 265
MAP SCALE ........................................ 265
ORIENTATION OF THE MAP ............. 266
SWITCHING THE MAP MODE............ 267
SCREEN SCROLL OPERATION ........ 269
ADJUSTING LOCATION IN SMALL INCREMENTS ................. 269
3. MAP SCREEN INFORMATION .......................... 270
DISPLAYING MAP INFORMATION .... 270
DISPLAYING INFORMATION ABOUT
THE ICON WHERE
THE CURSOR IS SET ...................... 272
STANDARD MAP ICONS .................... 273
4. TRAFFIC INFORMATION ............ 274
DISPLAYING TRAFFIC INFORMATION ON THE MAP .......... 276
1. DESTINATION SEARCH SCREEN .................................... 277
2. SEARCH OPERATION.. .............. 279
SELECTING SEARCH AREA .............. 280
SETTING HOME AS
DESTINATION................................... 280
SETTING PRESET DESTINATIONS AS DESTINATION ............................. 280
SEARCHING BY ADDRESS ................ 281
SEARCHING BY POINT OF INTEREST ....................... 282
SEARCHING FROM PREVIOUS DESTINATIONS............. 285
SEARCHING BY ADDRESS BOOK .... 285
SEARCHING BY EMERGENCY .......... 286
SEARCHING BY INTERSECTION AND FREEWAY ................................ 286
SEARCHING BY MAP ......................... 288
SEARCHING BY COORDINATES ....... 288
3. STARTING ROUTE GUIDANCE....... ......................... 289
STARTING ROUTE GUIDANCE.......... 289
PAUSING GUIDANCE ......................... 292
1BASIC OPERATION2DESTINATION SEARCH
8
NAVIGATION SYSTEM*

8
261
HIGHLANDER_Navi_U
4
5
6
7
9
1
2
3
8
1. ROUTE GUIDANCE SCREEN ..... 293
SCREEN FOR ROUTE GUIDANCE ... 293
ROUTE OVERVIEW............................ 294
DURING FREEWAY DRIVING............ 295
WHEN APPROACHING INTERSECTION ............................... 296
TURN LIST SCREEN .......................... 297
TURN-BY-TURN ARROW SCREEN ........................................... 297
2. TYPICAL VOICE GUIDANCE PROMPTS.................................. 298
3. EDITING ROUTE ......................... 299
ADDING DESTINATIONS ................... 300
REORDERING DESTINATIONS ......... 300
DELETING DESTINATIONS ............... 300
SETTING ROUTE PREFERENCES ............................... 301
SELECTING ROUTE TYPE ................ 301
DETOUR SETTING ............................. 302
1. MEMORY POINTS SETTINGS ................................. 304
SETTING UP HOME ........................... 305
SETTING UP PRESET
DESTINATIONS................................ 306
SETTING UP ADDRESS BOOK ......... 308
SETTING UP AREAS TO AVOID ........ 310
DELETING PREVIOUS DESTINATIONS................................ 312
1. DETAILED NAVIGATION SETTINGS ................................. 313
SCREENS FOR NAVIGATION
SETTINGS ........................................ 313
2. TRAFFIC SETTINGS................... 317
SCREEN FOR TRAFFIC SETTINGS ........................................ 317
AUTO AVOID TRAFFIC ....................... 318
MY TRAFFIC ROUTES ....................... 319
1. GPS (GLOBAL POSITIONING SYSTEM) .................... ............... 323
LIMITATIONS OF
THE NAVIGATION SYSTEM ............ 323
2. MAP DATABASE VERSION AND COVERED AREA ............. 325
MAP INFORMATION ........................... 325
ABOUT THE MAP DATA ..................... 326
3ROUTE GUIDANCE
4MEMORY POINTS
5SETUP
6TIPS FOR THE NAVIGATION
SYSTEM
NAVIGATION SYSTEM*
*: Entune Premium Audio only

262
HIGHLANDER_Navi_U
1. BASIC OPERATION
1. QUICK REFERENCE
MAP SCREEN
To display this screen, press the “APPS” button, then select “Navigation” on the
“Apps” screen.
No.NameFunctionPage
2D North-up, 2D
heading-up or 3D
heading-up sym-
bolIndicates whether the map orientation is set to
north-up or heading-up. The letter(s) beside this
symbol indicate the vehicle’s heading direction
(e.g. N for north). In 3D map, only a heading-up
view is available.
266
Options buttonSelect to display the “Navigation Options” screen.264
“GPS” mark
(Global Position-
ing System)Shows that the vehicle is receiving signals from
the GPS.323
Traffic indicator
Shows that traffic information is received. Select
to start voice guidance for traffic information.
When traffic information is received via HD Radio
broadcast, HD mark is displayed on the right.
274
Scale indicatorThis figure indicates the map scale.265

263
1. BASIC OPERATION
HIGHLANDER_Navi_U
NAVIGATION SYSTEM
8
Zoom in/out but-
tonSelect to magnify or reduce the map scale. When
either button is selected, the map scale indicator
bar appears at the bottom of the screen.265
Current position
button/voice
guidance buttonSelect to display the current position address.
 Select to repeat voice guidance.298
Destination but-
tonSelect to display the “Destination” screen.277
Speed limit iconIndicates the speed limit on the current road. The
display of the speed limit icon can be set to on/off.270
Route informa-
tion bar
Displays the current street name, or the distance
with the estimated travel time/arrival time to the
destination. The route information bar fills from
left to right as the vehicle progresses on the
route.
293
Route informa-
tion buttonSelect to change the display between the current
street name and the distance with the estimated
travel/arrival time.
293
No.NameFunctionPage

265
1. BASIC OPERATION
HIGHLANDER_Navi_U
NAVIGATION SYSTEM
8
2. MAP SCREEN OPERATION
1Press the “APPS” button.
2Select “Navigation” .
3Check that the current position map is
displayed.
1Select or to change the
scale of the map screen.
The scale indicator bar appears at the bot-
tom of the screen.
 Select and hold or to con-
tinue changing the scale of the map
screen.
 The scale of the map screen can also be
changed by selecting the scale bar
directly. This function is not available while
driving.
CURRENT POSITION
DISPLAY
To correct the current position manu-
ally:
P. 3 1 5
INFORMATION
●While driving, the current position mark
is fixed on the screen and the map
moves.
● The current position is automatically set
as the vehicle receives signals from the
GPS (Global Positioning System). If the
current position is not correct, it is auto-
matically corrected after the vehicle
receives signals from the GPS.
● After the 12-volt battery disconnection,
or on a new vehicle, the current position
may not be correct. As soon as the sys-
tem receives signals from the GPS, the
correct current position is displayed.
MAP SCALE
INFORMATION
● The map scale is displayed above the
zoom in button at the bottom left of the
screen.

267
1. BASIC OPERATION
HIGHLANDER_Navi_U
NAVIGATION SYSTEM
8
1Select “Options” on the map screen.
2Select “Map Mode” .
3Select the desired configuration but-
ton.
Depending on the conditions, certain
screen configuration buttons cannot be
selected.
■MAP ONLY
■DUAL MAP
The map on the left is the main map.
SWITCHING THE MAP MODE
No.FunctionPage
Select to display the single
map screen. 267
Select to display the dual
map screen.267
Select to display the com-
pass mode screen.268
Select to display the turn list
screen.297
Select to display the free-
way exit list screen.295
Select to display the inter-
section guidance screen or
the guidance screen on the
freeway.
296
Select to display the turn-
by-turn arrow screen.297