OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
5
2 If this light come on in yellow, refer to “Cruise control” Section 2-4, 2016 Owner’s Manual.
Cruise control SET indicator
Turn signal indicators
Headlight high beam indicator Airbag SRS warning
1
Low Tire Pressure Warning1
Cruise control indicator2
Slip indicator1
Low fuel level warning1
Automatic Transmission fluid temperature warning1
Vehicle Stability Control OFF indicator1
Traction Control OFF indicator1
Electric power steering system warning1
Anti-lock Brake System warning1
Vehicle Stability Control SPORT indicator1
Upshift/downshift indicator
Shift position indicator
Shift-up indicator
SNOW indicator
REV (engine RPM) indicator Shift position and shift range indicator Security indicator
SPORT indicator
Arrow direction indicates fuel tank door position
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
11
Lights & turn signals
Headlights
Turn signals
Parking lightsLow beam
Headlights
Right turn
Left turn Lane change
Lane change
High beam
Cruise control
1 The set speed may also be cancelled by depressing the brake pedal.2 The set speed may be resumed once vehicle speed exceeds 20 mph.
Functions
System ON/OFF
Increase speed
Decrease speed
Cancel1
Resume2
Set
High beam flasher
Turning system ON/OFF
Auto
Automatic light cut off system Automatically turns lights off after 30-second
delay, or lock switch on remote may be pushed after locking.
18 The camera for the rear view monitor system is located near the license plate.
To adjust the image on the rear view monitor screen, press the setup button
“
” on the left side of screen and select “Display” on the setup screen. Then
select “Camera” to adjust the screen brightness and contrast.
Refer to Scion.com to download the Owner‘s Manual for more details on this system.
The rear view monitor system camera is located as shown in the illustration.
REAR VIEW MONITOR SYSTEM CAMERA
The camera uses a special lens. The distance of the image that appears on the
screen differs from the actual distance.
When the camera is used under fluorescent lights, sodium lights or mercury lights
etc., the lights and the illuminated areas may appear to flicker.
In the following cases, it may become difficult to see the images on the screen,
even when the system is functioning:
• In the dark (for example, at night)
• When the temperature near the lens is high or low
• When water droplets are adhering to the camera, or when humidity is
high (for example, when it rains)
• When foreign matter (for example, snow or mud) is adhering to the camera
• When the camera has scratches or dirt on it
• When the sun or the beam of headlights is shining directly into the camera
lens
INFORMATION
*Smear effect
A phenomenon that occurs when a bright light (for example, sunlight reflected off
the vehicle body) is picked up by the camera; when transmitted by the camera,
the light source appears to have a vertical streak above and below it.If a bright light (for example,
sunlight reflected off the vehicle
body) is picked up by the camera,
a Smear effect* may occur.
INFORMATION
FEATURES/OPERATIONS
