2016 TOYOTA FR-S ignition

2
OVERVIEW
Paddle shift switches*
Ignition switch
Cruise control
Headlight and turn signal controls
Wiper and washer controls
Clock
Emergency flasher switch
Air Conditioning controls
Rear window defogger switch
Instrument panel

OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
9
FEATURES/OPERATIONS
Automatic Transmission (if equipped)
P
R
N
D
M
Park*
Reverse
Neutral
Drive
“M” mode
Tilt steering wheel
Hold wheel, push lever down, set angle and length, and return lever.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Parking brake
+ (“M” mode)
- (“M” mode)
+ (“M” mode)- (“M” mode)
Paddle shift switchesShift lever
* The ignition switch must be “ON” and the brake pedal depressed to shift from
Park.
Shift the shift lever to “M” position from “D” position.

+: Upshifting

-: Downshifting
Refer to the Owner’s Manual for more details.
“M” (Manual) mode
Lock release lever
Angle
Length
Pull(2) Push
(1) Pull slightly
(3) Lower
Set Release

OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
13
Windows
Automatic operation Push the switch completely down or pull it completely up
and release to fully open. To stop window midway, lightly push the switch in the
opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window
remains operable.
Window lock switch
Driver door window controls
Up
Down
00
Clock
Hour set
Minute set
Round off minutes
* The ignition switch
must be “ON.”

OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
15
Cup holders
Power outlets
Designed for car accessories. Ignition switch must be in the “ACC” or “ON”
position to be used.
Console trayGlove box
Bottle holder

16 NOTICE
If the vehicle is hit, the position and mounting angle of the camera may change. Be sure
to have the camera position and mounting angle checked at your local Toyota dealer.
The camera is of water proof construction. Do not detach, disassemble or modify it. Any
of these activities may cause the system to malfunction.
If the temperature changes rapidly, such as pouring hot water on the vehicle in cold
temperatures, the system may not operate normally.
Do not hit the camera or expose it to strong impact as this may cause its position and
mounting angle to change.
Do not rub the camera lens strongly. If the lens is scratched it cannot transmit a clear
image.
Do not allow organic solvent, car wax, window cleaner or glass coat to adhere to the
camera. If contact is made with one of these substances wipe it off as soon as possible.
When replacing tires on the vehicle, please consult your Toyota dealer. If you replace
the tires, the area displayed on the screen may change.
Do not use a high-pressure car-wash machine type wand to spray the camera or camera
area as this may cause serious damage to the rear view camera. Using intensive bursts
of water may result in the camera malfunctioning.
Rear view monitor system
The rear view monitor system assists the driver by displaying an image of the
camera’s view behind the vehicle when in reverse.
To see the camera’s image of the view behind the vehicle on the monitor screen,
the vehicle ignition switch must be in the ON position and the gear selector must
be in the REVERSE position.
If you shift the vehicle out of the “R” position, the screen returns to the
previous image.
The rear view monitor system is a device intended to supplement the driver
when motoring in reverse and should not be relied upon solely. Drivers should
check behind the vehicle before entering and are reminded to use the rear
view and side mirrors once seated to ensure the intended path is clear before
moving the vehicle.
FEATURES/OPERATIONS