2016 TOYOTA FR-S display

OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
1
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND
EMERGENCY FEATURES
INDEX
Engine maintenance 8
Fuel tank door release and cap 6
Hood release 8
Indicator symbols 4-5
Instrument cluster 4
Instrument panel 2-3
Keyless entry 6
Light control-instrument panel 7
Trunk release 7

Air Conditioning/Heating 14
Automatic Transmission 9
AUX port/USB port 14
Bottle holder 15
Clock 13
Cruise control 11
Cup holders 15
Lights & turn signals 11
Multi-Information Display 12
Parking brake 9
Power outlets 15
Rear view monitor system 16-18
Seat adjustments-Front 10
Seats-Fold down rear seats 10
Seats-Head restraints 10
Tilt steering wheel 9
Windows 13
Windshield wipers & washers 12

Door locks 19
Floor mat installation 22
Seat belts 19
Spare tire & tools 20
Star Safety System
TM 21-22
Tire Pressure Monitoring (warning) System 19

4
OVERVIEW
Instrument cluster
Seat belt reminder
(alarm will sound if speed is over 12 mph) Brake system warning
1
Charging system warning1
Low engine oil pressure warning1
Malfunction/Check Engine indicator1
Indicator symbols
Open door warning
AIR BAG ON and AIR BAG OFF indicator
1
If indicator does not turn off within a few seconds of starting engine, there may be a
malfunction. Have vehicle inspected by your Scion or Toyota dealer.
For details, refer to “Indicators and warning lights,” Section 2-2, 2016 Owner’s
Manual. Analog speedometer
Indicators and warning lights
Tachometer
Fuel gauge
Engine coolant temperature gauge
Digital speedometer
Odometer/Trip meter/Multi-Information Display

12
FEATURES/OPERATIONS
Multi-Information Display
Push “DISP” to change information in the following:
(1) Outside temperature
(2) Current fuel consumption
(3) Average fuel consumption
(4) Setting screen for the REV (engine RPM) indicator*
* Only displayed when the vehicle is stopped.
Windshield wipers & washers
Interval wipe
Slow
FastPull to wash and wipe
Single wipeIntermittent windshield wiper
frequency adjustment
Rotate to increase/
decrease wipe frequency

16 NOTICE
If the vehicle is hit, the position and mounting angle of the camera may change. Be sure
to have the camera position and mounting angle checked at your local Toyota dealer.
The camera is of water proof construction. Do not detach, disassemble or modify it. Any
of these activities may cause the system to malfunction.
If the temperature changes rapidly, such as pouring hot water on the vehicle in cold
temperatures, the system may not operate normally.
Do not hit the camera or expose it to strong impact as this may cause its position and
mounting angle to change.
Do not rub the camera lens strongly. If the lens is scratched it cannot transmit a clear
image.
Do not allow organic solvent, car wax, window cleaner or glass coat to adhere to the
camera. If contact is made with one of these substances wipe it off as soon as possible.
When replacing tires on the vehicle, please consult your Toyota dealer. If you replace
the tires, the area displayed on the screen may change.
Do not use a high-pressure car-wash machine type wand to spray the camera or camera
area as this may cause serious damage to the rear view camera. Using intensive bursts
of water may result in the camera malfunctioning.
Rear view monitor system
The rear view monitor system assists the driver by displaying an image of the
camera’s view behind the vehicle when in reverse.
To see the camera’s image of the view behind the vehicle on the monitor screen,
the vehicle ignition switch must be in the ON position and the gear selector must
be in the REVERSE position.
If you shift the vehicle out of the “R” position, the screen returns to the
previous image.
The rear view monitor system is a device intended to supplement the driver
when motoring in reverse and should not be relied upon solely. Drivers should
check behind the vehicle before entering and are reminded to use the rear
view and side mirrors once seated to ensure the intended path is clear before
moving the vehicle.
FEATURES/OPERATIONS

OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
17
CAUTION
The image on the screen is different from actual conditions. Depicted distances between
objects and flat surfaces will differ from actual distance. If you back up looking only at
the screen monitor, you may hit an object, vehicle or person.
Use your own eyes to confirm the vehicle’s surroundings, as the displayed image may
become faint or dark, and moving images will be distorted or not entirely visible when
the outside temperature is low.
INFORMATION
If the camera lens becomes dirty, it cannot transmit a clear image. If water
droplets, snow or mud adhere to the lens rinse with water and wipe with a soft
clean cloth. If the lens is extremely dirty, wash it with a mild cleaner and rinse
immediately.
AREA DISPLAYED ON SCREEN
The image displayed on the screen is an approximation only.
INFORMATION
The area displayed on the screen may vary
according to vehicle orientation or road
conditions.
The area detected by the camera is limited.
The camera does not detect objects which
are close to either corner of the bumper or
under the bumper.

18 The camera for the rear view monitor system is located near the license plate.
To adjust the image on the rear view monitor screen, press the setup button
“
” on the left side of screen and select “Display” on the setup screen. Then
select “Camera” to adjust the screen brightness and contrast.
Refer to Scion.com to download the Owner‘s Manual for more details on this system.
The rear view monitor system camera is located as shown in the illustration.
REAR VIEW MONITOR SYSTEM CAMERA
The camera uses a special lens. The distance of the image that appears on the
screen differs from the actual distance.
When the camera is used under fluorescent lights, sodium lights or mercury lights
etc., the lights and the illuminated areas may appear to flicker.
In the following cases, it may become difficult to see the images on the screen,
even when the system is functioning:
• In the dark (for example, at night)
• When the temperature near the lens is high or low
• When water droplets are adhering to the camera, or when humidity is
high (for example, when it rains)
• When foreign matter (for example, snow or mud) is adhering to the camera
• When the camera has scratches or dirt on it
• When the sun or the beam of headlights is shining directly into the camera
lens
INFORMATION
*Smear effect
A phenomenon that occurs when a bright light (for example, sunlight reflected off
the vehicle body) is picked up by the camera; when transmitted by the camera,
the light source appears to have a vertical streak above and below it.If a bright light (for example,
sunlight reflected off the vehicle
body) is picked up by the camera,
a Smear effect* may occur.
INFORMATION
FEATURES/OPERATIONS