2016 TOYOTA FR-S light

OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
11
Lights & turn signals
Headlights
Turn signals
Parking lightsLow beam
Headlights
Right turn
Left turn Lane change
Lane change
High beam
Cruise control
1 The set speed may also be cancelled by depressing the brake pedal.2 The set speed may be resumed once vehicle speed exceeds 20 mph.
Functions
System ON/OFF
Increase speed
Decrease speed
Cancel1
Resume2
Set
High beam flasher
Turning system ON/OFF
Auto
Automatic light cut off system Automatically turns lights off after 30-second
delay, or lock switch on remote may be pushed after locking.

OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
13
Windows
Automatic operation Push the switch completely down or pull it completely up
and release to fully open. To stop window midway, lightly push the switch in the
opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window
remains operable.
Window lock switch
Driver door window controls
Up
Down
00
Clock
Hour set
Minute set
Round off minutes
* The ignition switch
must be “ON.”

18 The camera for the rear view monitor system is located near the license plate.
To adjust the image on the rear view monitor screen, press the setup button
“
” on the left side of screen and select “Display” on the setup screen. Then
select “Camera” to adjust the screen brightness and contrast.
Refer to Scion.com to download the Owner‘s Manual for more details on this system.
The rear view monitor system camera is located as shown in the illustration.
REAR VIEW MONITOR SYSTEM CAMERA
The camera uses a special lens. The distance of the image that appears on the
screen differs from the actual distance.
When the camera is used under fluorescent lights, sodium lights or mercury lights
etc., the lights and the illuminated areas may appear to flicker.
In the following cases, it may become difficult to see the images on the screen,
even when the system is functioning:
• In the dark (for example, at night)
• When the temperature near the lens is high or low
• When water droplets are adhering to the camera, or when humidity is
high (for example, when it rains)
• When foreign matter (for example, snow or mud) is adhering to the camera
• When the camera has scratches or dirt on it
• When the sun or the beam of headlights is shining directly into the camera
lens
INFORMATION
*Smear effect
A phenomenon that occurs when a bright light (for example, sunlight reflected off
the vehicle body) is picked up by the camera; when transmitted by the camera,
the light source appears to have a vertical streak above and below it.If a bright light (for example,
sunlight reflected off the vehicle
body) is picked up by the camera,
a Smear effect* may occur.
INFORMATION
FEATURES/OPERATIONS

OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
19
SAFETY AND EMERGENCY FEATURES
If belt is fully extended, then retracted even slightly, it cannot be re-extended
beyond that point, unless fully retracted again. This feature is used to help hold
child restraint systems securely.
To find more information about seat belts, and how to install a child restraint
system, refer to the Owner’s Manual.
Keep as low on
hips as possible
Take up slack
Too high
Seat belts
Lock
Unlock
Door locks
If tire pressure becomes critically low on any of the tires (excluding the spare),
“
” indicator will illuminate. Correctly adjusting tire inflation will turn off the
light after a few minutes. If the light does not turn off, have the system checked
by your Scion or Toyota dealer.
Refer to the Owner’s Manual for more details.
Tire Pressure Monitoring (warning)
System