Page 121 of 812

1212. Instrument cluster
2
Instrument cluster
C-HR_OM_Europe_OM10528E
Odometer and trip meter display
Displays the following items. 
Odometer:
Displays the total distance the vehicle has been driven. 
Trip meter: 
Displays the distance the vehicle has been driven since the meter was last 
reset. Trip meters A and B can be used to record and display different dis- 
tances independently. 
Maintenance required information:
Displays the remaining distance until the engine oil should be changed. If 
“-” is displayed before distance, it means oil maintenance is overdue. Have 
the engine oil changed by any authorized Toyota retailer or Toyota autho- 
rized repairer, or any reliable repairer.
• Displays the maintenance required information when the engine switch 
is turned to the “ON” position (vehicles without smart entry & start sys- 
tem) or in IGNITION ON mode (vehicles with smart entry & start sys-
tem). 
• Maintenance required information reset method ( P. 621) 
Stop & Start system operation time (if equipped):
Displays the total amount of time that the engine has been stopped due to 
operation of the Stop & Start system during the time of the current engine 
stop. 
Instrument cluster light control display (monochrome display): 
Displays the meter light control display.
Shift position and shift range display (color display)
Displays the selected shift position or selected shift range. ( P. 244)
Engine coolant temperature gauge
Displays the engine coolant temperature.
6
7
8 
     
        
        Page 122 of 812
1222. Instrument cluster
C-HR_OM_Europe_OM10528E
Switches the items of the odome- 
ter and trip meter display by 
pressing the “TRIP” switch.
When the trip meter is displayed, 
pressing and holding the “TRIP” 
switch will reset the trip meter.
The brightness of the instrument cluster lights (when the headlight 
switch is on) can be adjusted. 
Display the instrument cluster light 
control by pressing the “TRIP” 
switch. 
Then, press and hold the switch. 
Adjust the brightness to the 
desired level by pressing the 
switch.
Changing the display
Instrument cluster light control (monochrome display) 
     
        
        Page 125 of 812

1252. Instrument cluster
2
Instrument cluster
C-HR_OM_Europe_OM10528E
●Average fuel consumption and current fuel consumption 
Displays the average fuel consumption since the function was last 
reset. 
• The function can be reset by pressing the “DISP” switch for lon- 
ger than 1 second when the average fuel consumption is dis- 
played. 
• Use the displayed average fuel consumption as a reference. 
Displays the current rate of fuel consumption.
Use the displayed current rate of fuel consumption as a reference.
● Driving range 
Displays the estimated maximum distance that can be driven with 
the quantity of fuel remaining. 
• This distance is computed based on your average fuel consump- 
tion. As a result, the actual distance that can be driven may differ 
from that displayed. 
• When only a small amount of fuel is added to the tank, the dis- 
play may not be updated.
When refueling, turn the engine switch to the “LOCK” position. 
If the vehicle is refueled without turning the engine switch to the “LOCK” 
position, the display may not be updated.
● Average vehicle speed 
Displays the average vehicle speed since the engine was last 
started. 
● Elapsed time 
Displays the elapsed time since the engine was started.
Drive information 
     
        
        Page 126 of 812

1262. Instrument cluster
C-HR_OM_Europe_OM10528E
●PCS (Pre-Collision System) (if equipped) (P. 298) 
● LDA (Lane Departure Alert with steering control) (if equipped)  
( P. 315) 
The settings of the following items can be changed. 
● Language 
Select to change the language on the display. ( P. 779) 
● Units 
Select to change the units for measure of the fuel consumption. 
( P. 779) 
● Eco Driving Indicator Light (vehicles with a Multidrive) 
Select to activate/deactivate the Eco Driving Indicator Light.  
( P. 779) 
● Tire pressure warning system (if equipped) 
Select to initialize the tire pressure warning system. ( P. 634)
■When disconnecting and reconnecting battery terminals 
The following information data will be reset: 
● Elapsed time 
● Average fuel consumption 
● Driving range 
● Average vehicle speed 
■ Liquid crystal display 
Small spots or light spots may appear on the display. This phenomenon is 
characteristic of liquid crystal displays, and there is no problem to continue 
using the display. 
■ Setting display automatic suspension 
In the following situations, the setting display will be suspended. 
● When a message appears 
● When the vehicle begins to move
Vehicle settings
Meter settings 
     
        
        Page 129 of 812

1292. Instrument cluster
2
Instrument cluster
C-HR_OM_Europe_OM10528E
Warning message display
Select to display warning messages and measures to be taken if a 
malfunction is detected. ( P. 704)
Settings display
Select to change the meter display settings and the operation set- 
tings of some vehicle functions. ( P. 132)
The multi-information display is 
operated using the meter control 
switches. 
Return to the previous screen 
Enter/set 
Select an item/change pages 
● Current fuel consumption (zone display/numerical display)*1
Displays the current rate of fuel consumption.
●Average fuel consumption (after reset*2/after start/after refuel)*1
Displays the average fuel consumption since the function was reset, the 
engine was started, and the vehicle was refueled, respectively 
Use the displayed average fuel consumption as a reference.
● Average vehicle speed (after reset*2/after start)*1
Displays the average vehicle speed since the function was reset and the 
engine was started, respectively
● Elapsed time (after reset*2/after start)*1
Displays the elapsed time since the function was reset and the engine was 
started, respectively
Operating the meter control switches
1
2
3
Drive information 
     
        
        Page 131 of 812
1312. Instrument cluster
2
Instrument cluster
C-HR_OM_Europe_OM10528E
●Sway warning (if equipped)
Detects the sway of the vehicle within a lane, which is often associated 
with a decrease in the driver’s attention level, and displays the decrease in 
attention using a bar display. 
The shorter the bar length, the more the driver may need to rest. 
This display is a part of the LDA ( Lane Departure Alert with steering con- 
trol). The display is enabled when the operating conditions of the vehicle
sway warning are met. ( P. 315)
●Display off
A blank screen is displayed.
*1: Can be registered to Drive information 1 and 2. (P.  1 3 2 )
*2: Resetting procedures: 
• Select a function to be reset using the meter control switches and then 
press and hold   to reset. 
• If there is more than one function that can be reset, check boxes will be 
displayed next to those functions.
*3: Can be registered to Drive information 3. ( P. 132) 
     
        
        Page 134 of 812

1342. Instrument cluster
C-HR_OM_Europe_OM10528E
■Pop-up display 
In some situations, such as when a switch operation is performed, a pop-up 
display will be temporarily display ed on the multi-information display.  
The pop-up display function can be set on/off. 
■ Setting display automatic cancelation 
In the following situations, setting display in which the settings can be 
changed through the meter control switch will automatically be turned off. 
● If a warning message appears while the setting display is displayed 
● When the vehicle begins to move while the setting display is displayed 
■ Liquid crystal display 
Small spots or light spots may appear on the display. This phenomenon is 
characteristic of liquid crystal displays, and there is no problem continuing to 
use the display. 
■ When disconnecting and reconnecting battery terminals 
The drive information will be reset. 
■ Eco Driving Indicator Zone Display (if equipped) 
Suggests Zone of Eco driving and Eco 
driving ratio based on acceleration. 
Zone of Eco driving
Eco driving ratio based on accelera- 
tion 
If the vehicle exceeds Zone of Eco 
driving, the green area disappears
and Eco Driving Indicator Light will 
turn off. ( P. 118)
1
2 
     
        
        Page 139 of 812

1392. Instrument cluster
2
Instrument cluster
C-HR_OM_Europe_OM10528E
Press   on the navigation/ 
multimedia system. 
Select “Trip information”.
■Trip information screen 
Average vehicle speed since 
the engine was started. 
Cruising range ( P. 141) 
Fuel consumption in the past 
15 minutes 
Elapsed time since the 
engine was started. 
Resetting the consumption 
data 
Vehicles without a smart entry & start system:  
Average fuel consumption for the past 15 minutes is divided by 
color into past averages and averages attained since the engine 
switch was last turned to the “ON” position. Use the displayed aver- 
age fuel consumption as a reference.  
Vehicles with a smart entry & start system:  
Average fuel consumption for the past 15 minutes is divided by 
color into past averages and averages attained since the engine 
switch was last turned to IGNITION ON mode. Use the displayed 
average fuel consumption as a reference.
These images are examples only, and may vary slightly from actual con- 
ditions.
Trip information
1
2 
1
2
3
4
5