2016 TOYOTA C-HR instrument cluster

1352. Instrument cluster
2
Instrument cluster
C-HR_OM_Europe_OM10528E
■ Dynamic Torque Control AWD system display (AWD models)
■ Arrow guide navigation (vehicles with a navigation system)
Displays the Dynamic Torque Control
AWD system operation state, the front tire
direction (angle) and the G-force state.
Front tire direction display
Displays the estimated direction for
the front tires.
Torque distribution display
Displays the amount of drive torque
applied.
G-force display
Displays the current G-force state.
The arrow guide navigation appears only
while route guidance of the navigation
system is being performed. When a turn
approaches, the distance to the turn and
the turn direction are displayed.
Turn direction
The image shown may differ from the
actual intersection.
Distance to the next turn
1
2
3
1
2

1362. Instrument cluster
C-HR_OM_Europe_OM10528E
■ Ending display
When the engine switch is turned off, each of the following will be displayed
on the multi-information display, and will extinguish after approximately 30
seconds.
● Elapsed time
● Distance
● Average fuel consumption
WARNING
■The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the display monitor may
respond slowly, and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear
number appearing on the display. This lag could cause the driver to down-
shift again, causing rapid and exce ssive engine braking and possibly an
accident resulting in death or injury.
■ Cautions during setting up the display
As the engine needs to be running during setting up the display, ensure that
the vehicle is parked in a place with adequate ventilation. In a closed area
such as a garage, exhaust gases including harmful carbon monoxide (CO)
may collect and enter the vehicle. This may lead to death or a serious
health hazard.

1372. Instrument cluster
2
Instrument cluster
C-HR_OM_Europe_OM10528E
NOTICE
■During setting up the display
To prevent battery discharge, ensure that the engine is running while setting
up the display features.

1382. Instrument cluster
C-HR_OM_Europe_OM10528E
Fuel consumption information
Navigation/multimedia system
: If equipped
Fuel consumption information can be displayed on the naviga-
tion/multimedia system.

1392. Instrument cluster
2
Instrument cluster
C-HR_OM_Europe_OM10528E
Press on the navigation/
multimedia system.
Select “Trip information”.
■Trip information screen
Average vehicle speed since
the engine was started.
Cruising range ( P. 141)
Fuel consumption in the past
15 minutes
Elapsed time since the
engine was started.
Resetting the consumption
data
Vehicles without a smart entry & start system:
Average fuel consumption for the past 15 minutes is divided by
color into past averages and averages attained since the engine
switch was last turned to the “ON” position. Use the displayed aver-
age fuel consumption as a reference.
Vehicles with a smart entry & start system:
Average fuel consumption for the past 15 minutes is divided by
color into past averages and averages attained since the engine
switch was last turned to IGNITION ON mode. Use the displayed
average fuel consumption as a reference.
These images are examples only, and may vary slightly from actual con-
ditions.
Trip information
1
2
1
2
3
4
5

1402. Instrument cluster
C-HR_OM_Europe_OM10528E
Press on the navigation/
multimedia system.
Select “Past record”.
■Past record screen
Best recorded fuel consump-
tion
Previous fuel consumption
record
Average fuel consumption
Updating the average fuel
consumption data
Resetting the past record
data
The average fuel consumption history is divided by color into past
averages and the average fuel consumption since the last updated.
Use the displayed average fuel consumption as a reference.
These images are examples only, and may vary slightly from actual con-
ditions.
Past record
1
2
1
2
3
4
5

1412. Instrument cluster
2
Instrument cluster
C-HR_OM_Europe_OM10528E
■Updating the past record data
Update the average fuel consumption by selecting “Update” to measure the
current fuel consumption again.
■ Resetting the data
The fuel consumption data can be deleted by selecting “Clear”.
■ Cruising range
Displays the estimated maximum distance that can be driven with the quan-
tity of fuel remaining.
This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that dis-
played.

1422. Instrument cluster
C-HR_OM_Europe_OM10528E