2016 TOYOTA AVALON HYBRID reset

2
OVERVIEW
Instrument panel
Steering wheel audio controls2
Telephone controls2
Voice command button2
Trip information DISP button
Dynamic Radar Cruise Control (DRCC) vehicle-to-vehicle distance button1
Dynamic Radar Cruise Control (DRCC) or Cruise control switch
Air conditioning controls
Clock
Outside rearview mirror/Rear window defogger button
Driving position memory switches
1
Headlight and turn signal controls
Wiper and washer controls
Emergency flasher button
Entune navigation system
2 or Entune audio system2
Tire Pressure Monitoring (warning) System reset button
Trunk opener main switch
Steering wheel controlsAutomatic Air Conditioning
(Type A)

4
OVERVIEW
Odometer display
Trip meter display
Shift position/shift range display
Engine coolant temperature gauge
Service indicators and warnings
Instrument cluster
Hybrid System indicator
Speedometer
Fuel gauge
Trip meter reset knob/
Instrument panel light control knob
Multi-Information Display
1 If indicator does not turn off within a few seconds of starting engine, there may be a
malfunction. Have vehicle inspected by your Toyota dealer.
2 If this light flashes, refer to “Cruise control,” Section 4-5, 2016 Owner’s Manual.
Low engine oil pressure warning1
Driver/Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Indicator symbols
Brake system warning1
Brake system warning light1
For details, refer to “Indicators and warning lights,” Section 2, 2016 Owner’s
Manual.
Charging system warning1
SRS AIR BAG ON/OFF indicator
Master warning light
1
Electric power steering system warning1

34
Push up, or squeeze
lock release to lower
Seat belts-Shoulder belt anchor
System reset initialization
1. Push and hold “
SET” button until
the indicator blinks three times.
2. Wait a few minutes to allow
initialization to complete. The tire pressure detected by the
tire pressure warning system can
be displayed on the Multi-Information
Display.
Tire Pressure Monitoring (warning)
System
After adjusting tire pressures, or after tires have been rotated or replaced, turn
the “ENGINE START STOP” switch to IGNITION ON mode and press and hold the
“
SET” button until indicator blinks three times. Let the vehicle sit for a few
minutes to allow initialization to complete.
Refer to the load label on the door jamb or the Owner’s Manual for tire inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains
on, take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes
in tire pressure from natural air leakage. If the system has not been initialized
recently, setting the tire pressures to factory specifications should turn off the light.
SAFETY AND EMERGENCY FEATURES