Customizing functions
90
●Warning Volume setting
The volume can be set to Max/Mid/Min.
When on the Warning Volume settings screen, if the volume is selected with the /
switch, 3 short beeps will sound.
●Lead Vehicle Acquisition Sound setting
The Lead Vehicle Acquisition Sound setting can be activated (ON) or deactivated (OFF).
●Lead Vehicle Moving Monitor Function
The Lead Vehicle Start Alert function setting can be activated (ON) or deactivated (OFF).
●Vehicle Icon setting
Your vehicle indicator setting can be activated (ON) or deactivated (OFF).
●Cancelling the custom functions
In the following cases, the custom functions will be canceled and the “Change settings”
screen will be displayed.
xWhen you keep pulling the (Info)/SET switch toward you
xWhen the engine is turned off
xWhen the switch is not operated for approximately 30 seconds
NOTE
When “Return” is selected, the system will return to the screen directly above
the current one.
Message screen list
91
Message screen list
If an EyeSight warning or malfunction is detected, a message will be displayed on the multi
information display. Depending on the message, a buzzer will sound at the same time.
If a message is displayed, refer to the mes-
sage list and take the appropriate action.
While the mark is illuminated, pull the
(Info)/SET switch to indicate the message
again.
■Message screen list (precautions and notices)
Item Displayed screen mark Action
Pre-Collision Braking
SystemNone
ŸRefer to page 27.
The “brake more”
warningNone
ŸRefer to page 52.
Pre-Collision Throttle
ManagementNone
ŸRefer to page 62.
Apply Brake None
ŸRefer to page 27.
Lane Departure
WarningNone
ŸRefer to page 68.
Normal indicator Normal indicatorMessage indicator
S01137
EyeSight Off
Check Manual
mark
S01138
S00695
S01139
Apply Brake
To Hold
Position Check
Manual
S00696