3
Seating
10-Way Power Driver’s Seat (if equipped)
1. Forward/Backward, Angle and Height
Move the switch toward the front
or rear to move the seat forward
or backward. Pull the switch up
or push down on the front of the
switch to adjust the angle of the
seat cushion. Pulling the switch
straight up or pushing the switch
straight down will adjust the height
of the entire seat cushion. 2. Seatback
Move the switch in the
corresponding direction to adjust
the angle of the seatback.
3. Lumbar Support Press the front part of the switch
to increase lumbar support;
press the rear part of the switch
to decrease lumbar support.
Heated Seats (if equipped)
Press the switch in the corresponding direction for the desired seat temperature. To
turn off the seat heater, slightly press in the opposite direction of the current position.
1
2
3
Getting
Started
1980916_16a_Subaru_Forester_QRG_061015.indd 36/10/15 10:59 AM
Getting
Started Instrument
Panel Gauges
Personalize ControlsWhile
Operating Safety/In Case
of Emergency Additional
Information
