Page 48 of 291
BASIC INFORMATION BEFORE OPERATION
46
SCREEN ADJUSTMENT
The brightness, contrast, tone and color of the screen can
be adjusted.
1.Select.
2.SelectSETTINGS (SETTINGS).
3.SelectDisplay (Display).
4.Select the items to be set.
No. Function
Select to adjust the general screen display.
Select to adjust the camera display.
Select to adjust the video display.
5.Select the desired item to be adjusted.
XGeneral
XCamera
Page 52 of 291
BASIC OPERATION
50
BASIC OPERATION
SOME BASICS
This section describes some of the basic features of the
audio/visual system. Some information may not pertain to
your system.
Your audio/visual system works when the ignition switch is
turned to the “ACC” or “ON” position.
CAUTION
OTo prevent the battery from being discharged, do not leave
the audio/visual system on longer than necessary when the
engine is not running.
TURNING THE SYSTEM ON AND OFF
“POWER/VOLUME” knob: Press to turn the audio/visual
system on and off. The system turns on in the last mode
used. Turn this knob to adjust the volume.
“AUDIO/TUNE” knob: Press to display screen buttons for
the audio/visual system.
”A function that enables automatic return to the split
screen from the audio/visual screen can be selected.
: 3
Page 53 of 291
BASIC OPERATION
51
AUDIO
3
SELECTING AN AUDIO SOURCE
1.Press the “AUDIO/TUNE” knob.
”The screen can also be displayed by selecting followed by AUDIO (AUDIO).
”If the audio control screen appears, select
Source
(Source) on the audio screen or press the “AUDIO/
TUNE” knob again.
2.Select the desired source.
NOTE
ODimmed screen buttons cannot be operated.
OWhen there are two pages, select
or to change the page.
REORDERING THE AUDIO SOURCE
1.Display the “Select Audio Source (Select Audio Source)”
V F U H H Q : 3
2.SelectReorder (Reorder).
3.Select the desired audio source then or to
reorder.
4.SelectOK (OK).
Page 56 of 291