Dashboard
FunctionPage
0043Dashboard instruments110
0044Instrument cluster23
0087Horn
0085Windshield wipers combi-
nation switch74
0083Switches the automatic
locking feature on/off55
Switches the hazard warn-
ing lamps on/off69
0084Overhead control panel27
006Bsmart Audio-System/smart
Media-System (see the sep-
arate operating instruc-
tions)
FunctionPage
006CClimate control system
control panel79
006DIgnition lock87
006EAdjusts the steering wheel65
006FControl panel for:
Turning the forward colli-
sion warning on/off48
Turning the parking aid on/
off107
0070Lights combination switch67
0071Shift paddles96
22Dashboard
>> At a glance.
Multifunction steering wheel
FunctionPage
0043Color display in instrument
cluster111
0044smart Audio-System or
smart Media-System dis-
play (see the separate
operating instructions)
008700810082Changes the vol-ume of the smart Audio-Sys-
tem or smart Media-System
(see the separate operating
instructions)
0059 Switches voice-oper-
ated control of the smart
Audio-System on/off and
accepts/ends a call (see the
separate operating
instructions)
0085Cruise control button105
® Increases or stores
the current speed
− Decreases current speed
RES Selects a stored speed
FunctionPage
0083Cruise control button105
° Calls up the last speed
stored
0084Cruise control button105
±Interrupts cruise con-
trol
006BCruise control button 0085105
008B0078Activates or
deactivates cruise control
006C00630064Scrolls through
a menu or list111
0076
Confirming your selection111
Changes to the "Reset val-
ues" function in certain
menus
111
Hiding display messages118
iVoice-operated control as well as control
of the telephone and volume using the
steering wheel buttons in the control panel on the right 0087only function with the smart
Media-System. If you use a smart Audio-
System or an audio device from another manufacturer, the functions may be
restricted or not available at all.
Multifunction steering wheel25
>> At a glance.
Also make sure that there are no objects,
e.g. cushions, between the occupant and the
seat.
Seat belts are solely intended for the pro-
tection and restraint of the vehicle occu-
pants. To secure objects, luggage or loads,
always observe the "Loading guidelines"
(
Ypage 142).
Fastening seat belts
Observe the safety notes on the seat belt
(Ypage 31) and the notes on correct use of seat
belts (Ypage 32).
For easy fastening, the seat belt passes
through a belt loop on the side of the seat.
Basic illustration
XAdjust the seat (Ypage 61).
The seat backrest must be in an almost ver-
tical position.
XPull the seat belt smoothly from belt outlet
0087 and engage belt tongue 0044into belt
buckle 0043.
XIf necessary, pull upwards on the shoulder
section of the seat belt to tighten the belt
across your body.
In order to attach the child restraint system
securely in the vehicle, the seat belt on the
front-passenger seat is equipped with a spe- cial seat belt retractor. Further information
on the "Special seat belt retractor"
(
Ypage 43).
Releasing seat belts
!Make sure that the seat belt is fully rolled
up. Otherwise, the seat belt or belt tongue
will be trapped in the door or in the seat
mechanism. This could damage the door, the
door trim panel and the seat belt. Damaged seat belts can no longer fulfill their pro-
tective function and must be replaced.
Visit a qualified specialist workshop.
XPress the release button in the belt buckle,
hold the belt tongue firmly and guide the
belt back.
Belt warning for the driver and front
passenger
The 0076 seat belt warning lamp in the
instrument cluster is a reminder that all
vehicle occupants must wear their seat belts.
It may light up continuously or flash. In addi-
tion, there may be a warning tone.
Regardless of whether the driver's seat belt
has already been fastened, the 0076seat belt
warning lamp lights up for six seconds each
time the engine is started. If the driver's or
front-passenger seat belt has not been fas-
tened, the 0076seat belt warning lamp starts
to light up continuously after these
six seconds. As soon as the driver and front
passenger fasten their seat belts, the 0076
seat belt warning lamp goes out.
If the driver's seat belt is not fastened after
the engine is started, an additional warning
tone will sound. The warning tone switches off
after six seconds or once the driver's seat
belt is fastened.
If the vehicle speed exceeds 12 mph (20 km/h)
and the driver's or front-passenger seat belt
is not fastened, a warning tone sounds again.
The warning tone sounds with increasing
intensity for a maximum of 120 seconds or
until the driver or front passenger have fas-
tened their seat belts.
If the driver or front passenger unfasten
their seat belts during the journey, the seat
belt warning is activated again.
Occupant safety33
>> Safety.
Z
