2016 Seat Ibiza ST USB

Full Link*
Pairing of portable devices supporting
the Mirr orLink®
, Andr
oid Auto™
and/or Apple CarPlay™ technologies Fig. 64
Full Link menu Fig. 65
Full Link menu Carousel
When
y
ou enter the Full Link context for the
first time, the technologies available for pair-
ing the portable device are displayed.
Once the device connects via USB, the sys-
tem will offer you the technologies available
for establishing a connection with your mo- bile phone.
In the event of simultaneous connections be-
tween two devices with different operating
systems, a choice will be presented for which
one to make the connection with ››› Fig. 65.
View of the device list
iPhone™ devices only support Apple Car-
Play™.
There are some Android devices that support
MirrorLink ®
and Android Auto™.
Bear in mind that once the device is connec-
ted it will not be available as an audio
source.
Full Link setup
Function button: function 
Data transfer for SEAT apps: allows the exchange of infor-
mation between the vehicle and applications authorised
by SEAT. Last Mode
If
a se

ssion using one technology ends with-
out the disconnection being made from the
Infotainment system (simply by disconnect-
ing the cable) then when the device is next
connected to it, the session will start without
the user being required to take any action 1)
.
Information
Consult the mobile device manual.
Depends on each technology: Availability in a country
Third party applications
For further information:
MirrorLink ®
:
www.mirrorlink.com
Apple CarPlay™:
www.apple.com/ios/carplay
Android Auto™:
www.android.com/auto Note
In order to use Android Auto™ technology it
i s

necessary to download the Android Auto™
application, located on Google Play™. 1.
2.
1)
Unless the device requires the screen to be un-
loc k

ed in order to establish the connection. 81

Full Link*
MirrorLink ®Fig. 66
Function buttons in the general view
of c
ompatible applications. Fig. 67
Other MirrorLink function buttons. MirrorLink
®
is

a protocol which enables com-
munication between a portable device and
the Infotainment system via USB.
Using it makes it possible to display and
manage the content and functions displayed on the portable device on the Infotainment
sys

tem screen.
To avoid distracting the driver while driving,
only specially adapted applications can be
used ››› in Introduction on page 77.
R equir

ements
In order to use MirrorLink ®
, the following re-
quirements must be met:
● The mobile device must be compatible with
MirrorLink ®
.
● The mo

bile device must be connected to
the Infot
ainment system via USB.
● Depending on the mobile device used, a
suit
able application must be installed for the
use of MirrorLink ®
on the device.
Initiating the connection ● In order to initiate the connection with the
mob
ile device, it is simply necessary to con-
nect it to the Infotainment system via the
USB connection.
● A pop-up screen will appear, which will re-
ques
t that you accept the device.
Function buttons and possible messages
Function button: function
Full LinkTo return to the Full Link main menu.
Function button: function
CLOSE APPS
Press to close the open apps. Then
press the apps to be closed or the Close all
function button to close all
the open applications.
1 : 1Press to change to the mobile device
screen.
SETUPTo open the Full Link setup
››› Fig. 67 1Press to return to the MirrorLink ®
main menu.
››› Fig. 67 2Press to display all the function but-
tons in the lower or upper right-hand
margin of the screen.
›››
Fig. 67  / Allows buttons 1 and 2 to be hid-
den or shown.
››› Fig. 1 12 MirrorLink
®
set up
Function button: function
Screen orientation: On those devices that support this fea-
ture, it is possible to select the following types of screen
display orientation:
Landscape
Portrait 
Rotated 180°: Allows you to rotate the image provided
by the device by 180°. 
Activate MirrorLink pop-up windows: Allows MirrorLink
®
pop-up windows in applications that support it. 82

Full Link*
Apple CarPlay™* 3
Valid for compatible iPhone™ mobile telephones.
A lso, iPhone™ mobile telephones only support Ap-
ple CarPlay™
Apple CarPlay™ is a protocol which enables
communication between a mobile telephone
and the Infotainment system via USB.
This makes it possible to display and operate
the mobile telephone on the Infotainment
system screen.
Requirements
In order to use Apple CarPlay™, the following
requirements must be met:
● The mobile device must be compatible with
Ap p

le CarPlay™.
● The mobile device must be connected to
the Infot
ainment system via USB.
Initiating the connection
In order to initiate the connection with the
mobile device, it is simply necessary to con-
nect it to the Infotainment system via the
USB connection.
● A pop-up screen will appear, which will re-
ques
t that you accept the device.
● If you are initiating the session using Apple
CarPl
ay™ technology it will not be possible
to pair another device via Bluetooth™. The following message will appear in the main
PHONE menu.
Please disconnect Apple CarPlay
first, before you can connect
another mobile telephone.
Hol

ding down the steering wheel multifunc-
tion  button or the VOICE button of the Info-
t ainment

system will start the Apple™ “voice
engine”.
To return to the basic contents of the Infotain-
ment system, press the SEAT icon.
Android Auto™* 3
V
alid for compatible Android mobile phones.
Android Auto™ is a protocol which enables
communication between a portable device
and the Infotainment system via USB.
This makes it possible to display and operate
the mobile telephone on the Infotainment
system screen.
Requirements
In order to use Android Auto™, the following
requirements must be met:
● The mobile device must be compatible with
Andr oid Aut

o™.
● The mobile device must be connected to
the Infot
ainment system via USB. ●
The Android Aut
o™ application should al-
ready be downloaded and installed on the
mobile device.
Initiating the connection
In order to initiate the connection with the
mobile device, it is simply necessary to con-
nect it to the Infotainment system via the
USB connection, and to be sure to follow the
instructions of the device being paired.
● The first connection to Android Auto™
mus
t be done while the vehicle is stationary.
● Once the first pop-up window about accept-
ing d
ata transfer between the car and the de-
vice has been accepted, a message will ap-
pear requesting that you check your mobile
device for the confirmations needed to pair it
with the Infotainment system.
● If you are initiating the session using
Android Aut
o™ technology via USB, the mo-
bile telephone connects automatically via
Bluetooth™ to the Infotainment system tele-
phone and it will not be possible to pair an-
other mobile telephone via Bluetooth™.
Holding down the steering wheel multifunc-
tion  button or the VOICE button of the Info-
t ainment

system will start the Android™
voice “engine”.
To return to the basic contents of the Infotain-
ment system, press the Return to SEAT
button. »
83

Full Link*
Note
Some mobile devices require a change in the
USB c onnection mode in or
der to use Android
Auto™.
● Make sure that your mobile is in “Media
Tr

ansfer Protocol (MTP)” mode before it is
connected by USB to the Infotainment sys-
tem. 84

Full Link*
Frequently asked questions about Full LinkWhat is the connection method?USB cable.
Will the USB cable be supplied with the vehicle?No. The USB cable supplied with the device should be used.
Is navigation possible?Navigation is possible in each one of the Full Link technologies if the technology is available in your country
and if you have the Navigation app.
What is the difference between using the Full Link system navigator
(via telephone) instead of another navigator?Advantages: daily updates.
Disadvantages: data consumption, reception problems.
Can I send voice messages?With certified apps, such as SEAT ConnectApp, you can answer but not send.
What apps will be visible as I am driving?Depending on the technology:
– for MirrorLink ®
: apps certified by SEAT and the CCC,
– for Android Auto™: the Apps selected by Google™,
– for Apple CarPlay™: the Apps selected by Apple™.
Where can I find compatible Apps?Compatible apps are shown at the following links:
www.mirrorlink.com/
www.android.com/auto/
www.apple.com/ios/carplay/
Where can I download the apps?From Google Play™ for Android Auto™/MirrorLink ®
and from the Apple Store™ for Apple CarPlay™.
If Full Link stops working, where can I have it repaired?If the problem is in the car, you should go to the dealer. If the problem is in the mobile device, you should see
your mobile telephone vendor.
Will WhatsApp be certified?This depends on the technology.
Is MirrorLink ®
available in my country?Yes, MirrorLink ®
is available in all the countries and regions where SEAT operates.
What are the differences between MirrorLink ®
, Android Auto™ and
Apple CarPlay™?MirrorLink ®
is not compatible with Android Auto™ or Apple CarPlay™, as they are different technologies.
They have all coexist in Full Link, although Android Auto™ is designed for telephones with the Android™ op-
erating system and Apple CarPlay™ is designed for iPhones.
Can MirrorLink ®
be installed in a previous SEAT model?No, that is not possible. 85

Setup
Setup
M enu and sy
stem settings
Main menu System settings 

› ›
›
table on page 2
The selection of possible settings will de-
pend on the country, the unit in question and
the vehicle equipment.
● Press the Infotainment system MENU but-
t on and then pr

ess the SETUP function but-
t on.
● T
o adjust the settings for a certain function,
pre
ss the appropriate function button in the
main menu. Changes are automatically stor-
ed when a menu is closed.
Function button: function
Screen: To perform screen setup.
Select display mode: Grid or Carousel.
 Switch off screen (in 10 seconds): If this function is ac-
tive and the Infotainment system is not in use, the
screen will switch off after approximately 10 sec-
onds. Pressing the screen or pressing one of the Info-
tainment system buttons will switch the screen back
on.
Brightness: To select the brightness level of the
screen.
Function button: function
Day/Night: To select the display type ( Day, Night or
Automatic ).
Touchscreen tone: Confirmation tone for pressing a
function button is activated.
Proximity sensors: The proximity sensors are activa-
ted. Also see ››› page 13, Proximity sensors .
 Show clock in standby mode: In standby mode, the cur-
rent time is shown on the Infotainment system dis-
play.
Date and time: To alter the time and date.
Clock time source: To select the time source (GPS or
manual).
GPS: The date and time can be selected using the
Time zone function button. In this case, the Dateand Time function buttons for manually entering
the data will not be active.
Manually: The date and time can be manually ad-
justed using the Date and Time function buttons.
Time: To manually alter the time.
 Automatic summer time (DST)*: The time is set auto-
matically.
Time zone: To change to the desired time zone.
Time format: To select the time display format (12- or
24-hour clock).
Date: To adjust the current time.
Date format: To select the display format for the date
(DD.MM.YYYY , YY-MM-DD or MM-DD-YY ).
Function button: function
Idioma/Language: To select the desired language for the
texts and announcements in the voice control system.
Additional keypad languages: To select the additional key-
pad languages.
Units: To set the measurement units for the vehicle dis-
plays.
Distance , vehicle speed , temperature, volume,
consumption and pressure .
Mobile device data transfer
Data transfer for SEAT apps: Allows the exchange of infor-
mation between the vehicle and SEAT applications.
These are not personal data.
Use apps to operate: Changes the level of interaction
with the applications.
Deactivate: Limits specific functions that require a
higher level of security. Confirm
: Allows 100% functionality of the App but
with certain actions relating to the Infotainment
system requiring confirmation. Allow
: Allows the execution of all the available
functions from the App.
Voice control: To perform the voice control setup
››› page 14.
Remove safely: To eject the data storage device (SD card
1/SD card 2/USB) from the system. After correctly eject-
ing the data storage device from the system, the func-
tion button becomes inactive (grey colour).
Factory settings: When resetting factory settings, all en-
tries and changes made are deleted, depending on the
selected setup. 86

Other important information
Other important information Le
gal information ECE
S
EA

T hereby declares that the unit is in com-
pliance with the essential requirements and
other relevant provisions of Directive
1999/5/EC (CE 0700).
Abbreviations
A2DPTechnology included by many manufactur-
ers to transmit audio signals via Bluetooth
(Advanced Audio Distribution Profile).
AMModulation of the wave amplitude (medium
wave, MW)
AUX-INAdditional audio input (Auxiliary Input)
AVRCPTechnology included by many manufactur-
ers for the remote management of audio
sources via Bluetooth (Audio Video Remote
Control Profile).
DABDigital transmission standard for digital ra-
dio (Digital Audio Broadcasting)
DINDeutsches Institut fur Normung (German in-
dustry standard).
DRMDigital Rights Management
DTMFDial tone with dual tone multiple frequency
EONAssistance for other radio transmission net-
works (Enhanced Other Network)
FMFrequency modulation (ultra-short wave,
UKW)
GPSGlobal Positioning System.
GSMGlobal System for Mobile Communications
HFPHands-Free Profile.
IMEISerial number for univocally identifying GSM
devices (International Mobile Station Equip-
ment Identity).
LEDLight Emitting Diode
MP3Audio file compression format.
PINPersonal identification number.
RDSRadio data system.
SMSShort Message Service.
SSDJukebox (SSD Solid-State-Drive).
TMCTraffic reports for dynamic navigation (Traffic
Message Channel)
TPTraffic reports function in Radio mode (Traf-
fic Program).
USBUniversal Serial Bus
VBRVariable bit rate.
WLANWireless Local Area Network
WMAAudio file compression format. 89

Index
Index
A
Af t
er starting route guidance . . . . . . . . . . . . . . . . 48
AM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Android Auto™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Apple CarPlay™ . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Areas where special regulations apply . . . . . . . . . 66
AUX-IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 AUX-IN multimedia socket . . . . . . . . . . . . . . . . . 37
external audio source . . . . . . . . . . . . . . . . . . . . . 37
AUX-IN multimedia socket . . . . . . . . . . . . . . . . . . . 37
Avoid congestion . . . . . . . . . . . . . . . . . . . . . . . . . . 53
B Base volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
sound suppression (mute) . . . . . . . . . . . . . . . . . 10
Bluetooth connect audio source . . . . . . . . . . . . . . . . . . . . . 37
profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
select Bluetooth audio . . . . . . . . . . . . . . . . . . . . 32
settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
C
Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Call mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
CAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
CAR menu management . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
CD/DVD select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
CD and DVD mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 CD or DVD
inser t and eject . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Check boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Communication between the Infotainment sys- tem and mobile devices . . . . . . . . . . . . . . . . . . . 77
Connectivity Box . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Cursor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
D
DAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 see: RADIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Delayed switch off (waiting time) . . . . . . . . . . . . . 10
Delete all entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
user entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Delete data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Delete entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Demo mode Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Destination memory . . . . . . . . . . . . . . . . . . . . . . . . 49
Dial number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Dial (telephone number) . . . . . . . . . . . . . . . . . . . . 70
Display use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
DVD video mode . . . . . . . . . . . . . . . . . . . . . . . . . 41
main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
regional code . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Dynamic route guidance . . . . . . . . . . . . . . . . . . . . 53 E
Eject
see: CD or D
VD . . . . . . . . . . . . . . . . . . . . . . . . . . 35
EON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Explosion risk areas Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
External audio source . . . . . . . . . . . . . . . . . . . . . . 37 adjust the playback volume . . . . . . . . . . . . . . . . 87
Bluetooth audio . . . . . . . . . . . . . . . . . . . . . . . . . 37
MEDIA-IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
WLAN audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
External data storage device MEDIA-IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
F Factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Favourites (speed dial buttons) see PHONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
FM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Frequency wavelength AM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
FM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Full Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Function buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 11 main menu Images . . . . . . . . . . . . . . . . . . . . . . . 43
MEDIA main menu . . . . . . . . . . . . . . . . . . . . . . . 30
RADIO main menu . . . . . . . . . . . . . . . . . . . . . . . 18
G
GALA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
91