Page 82 of 258

1.76
Daytime running lights 
function 
(front lights only)
Depending on the vehicle, the daytime 
running lights come on automatically 
when the engine is started.
EXTERIOR LIGHTING AND SIGNALS (1/3)
šSide lights
Turn the ring 2 until the symbol 
is opposite mark  3.
An indicator light on the instrument 
panel will come on.
1
Before driving at night, check that the electrical equipment is operatin\
g 
correctly and adjust the headlight beams (if your vehicle is not carryi\
ng 
its normal load). As a general precaution, check that the lights are not ob-
scured (by dirt, mud, snow or objects being transported).
The daytime running lights function is 
activated by default. Depending on the 
vehicle, it can be deactivated. Please 
refer to the multimedia touchscreen 
system instructions.
kDipped beam 
headlights
Manual operation
Turn the ring  2 until the symbol is oppo-
site mark  3. This indicator light on the 
instrument panel comes on.
Automatic operation
(depending on vehicle)
Turn ring  2 until the AUTO symbol is op-
posite mark  3: with the engine running, 
the dipped beam headlights switch on 
or off automatically depending on the 
brightness of the light outside, without 
any action on stalk  1.
If driving on the left in a left-hand 
drive vehicle (or vice versa), driv-
ers must have the lights adjusted 
(except for vehicles fitted with xenon 
bulbs) by an authorised dealer for 
the duration of the trip.
312   
     
        
        Page 83 of 258

1.77
EXTERIOR LIGHTING AND SIGNALS (2/3)
Switching off the lights
There are two possibilities:
–  Manually, move ring 2 to position 0;
–  automatically, if the ring 2 is in AUTO  position and if the main beam head-
lights are not switched on. The 
lights go out automatically when the 
engine is switched off, when the driv-
er’s door is opened or the vehicle is 
locked. In this case, the next time 
the engine is started, the lights will 
be switched back on according to the 
position of the ring  2, taking into ac-
count the exterior light level, without 
moving the stalk 1.
NB: if the fog lights are lit, the lights are 
not switched off automatically.
Lights-on reminder buzzer
If the lights are switched on after the 
engine is switched off, a warning 
beep sounds when the driver’s door is 
opened to warn you that the lights are 
still on.
12
áMain beam headlightsWith the engine running and 
the dipped beam headlights lit, push 
stalk  1. This indicator light on the instru-
ment panel comes on.
To return to the dipped headlight posi-
tion, pull stalk 1 towards you again.  
     
        
        Page 84 of 258

1.78
EXTERIOR LIGHTING AND SIGNALS (3/3)
fRear fog light
Turn centre ring 4 on the stalk 
until the symbol faces mark  5, then re-
lease it.
Operation of the fog lights depends on 
the exterior lighting selected, and an in-
dicator light will light up on the instru-
ment panel.
To avoid inconveniencing other road 
users, remember to switch off the rear 
fog light when it is no longer needed.
Switching off the lights
Turn ring 4 again until mark  5 is oppo-
site the symbol for the fog light you wish 
to switch off. The corresponding indi-
cator light goes out on the instrument 
panel.
The front and rear fog lights switch off 
when the exterior lights are switched 
off.
gFront fog lights
Turn centre ring 4  on the 
stalk  1 until the symbol faces mark  5, 
then release it.
Operation of the fog lights depends on 
the exterior lighting position selected, 
and an indicator light will light up on the 
instrument panel.
When driving in fog or snow, or 
when transporting objects which are 
higher than the roof, the headlights 
do not come on automatically.
Switching on the fog lights remains 
the responsibility of the driver: the 
indicator lights on the instrument 
panel inform you whether the fog 
lights are lit (indicator light on) or not 
(indicator light not on).
4
5
1  
     
        
        Page 85 of 258

1.79
éHazard warning lights 
Press switch 2.
This switch activates all four direction 
indicators and the side indicator lights 
simultaneously. It must only be used in 
an emergency to warn drivers of other 
vehicles that you have had to stop in 
an area where stopping is prohibited or 
unexpected, or that you are obliged to 
drive under special conditions.
Depending on the vehicle, the hazard 
warning lights may come on auto-
matically under heavy deceleration. 
You can switch them off by pressing 
switch 2 once.
Direction indicators
Move stalk 1  parallel to the steering 
wheel and in the direction you are going 
to turn it.
One-touch mode
When driving, it is possible that the 
steering wheel may not be turned suf-
ficiently to return the stalk automatically 
to its starting position.
In this case, move the stick 1  to half-
way, then release it: the stalk returns to 
its original point and the indicator light 
flashes three times.
Horn
Press steering wheel boss  A.
Headlight flasher
Pull stalk 1 towards you to flash the 
headlights.
AUDIBLE AND VISUAL SIGNALS
A
21