Page 78 of 258
1.72
TRIP COMPUTER AND WARNING SYSTEM: warning message
These appear with the ® warning light and require you to stop immediately, for your own safety, as soon as traf-
fic conditions allow. Stop your engine and do not restart it. Contact an approved Dealer.
Examples of warning messages are given in the following pages.  Note: the messages appear on the display either individually 
or alternately (when there are several messages to be displayed), and \
may be accompanied by a warning light and/or a beep.
Examples of messages Interpreting the display selected
« ENGINE FAILURE HAZARD »  Indicates an injection fault, the vehicle’s engine has overheated or there is a 
serious engine fault.
« BRAKING SYSTEM FAULT »  Indicates a fault in the braking system.
« BATTERY CHARGING FAULT »  Indicates a fault in the vehicle battery charging circuit (alternator e\
tc.).
« PUNCTURE » Indicates that at least one wheel is punctured or severely underinflated\
. 
     
        
        Page 201 of 258
5.17
FRONT HEADLIGHTS: changing bulbs (2/4)
Discharge bulb main beam 
headlights/dipped beam 
headlights
Never open the cover D.
Bulb type: D5S.
D
Due to the danger involved 
in handling high-voltage de-
vices, this type of bulb must 
be replaced by an approved 
dealer.
A special mounting is re-
quired to fit this type of 
headlight,  it is forbidden to 
fit a headlight  with  xenon 
bulbs to a vehicle which was not 
designed for it.
Before performing any 
action in the engine com-
partment, the ignition must 
be switched off by pressing 
the engine stop button (please see 
the information on “Starting, stop-
ping the engine” in Section 2).
Any operation on (or modi-
fication to) the electrical 
system must be performed 
by an approved dealer 
since an incorrect connection might 
damage the electrical equipment 
(harness, components and in partic-
ular the alternator). In addition, your 
Dealer has all the parts required for 
fitting these units.  
     
        
        Page 203 of 258
5.19
Daytime running lights and 
side lights 8
(depending on the vehicle)
Please see an authorised dealer.
Front fog lights  9
The front bumper needs to be removed; 
consult an approved Dealer.
Bulb type: H16.
Additional lights
If you wish to fit fog lights to your ve-
hicle, please see an authorised dealer.
Any operation on (or modi-
fication to) the electrical 
system must be performed 
by an approved dealer 
since an incorrect connection might 
damage the electrical equipment 
(harness, components and in partic-
ular the alternator). In addition, your 
Dealer has all the parts required for 
fitting these units.
9
FRONT HEADLIGHTS: changing bulbs (4/4)
Before performing any 
action in the engine com-
partment, the ignition must 
be switched off by pressing 
the engine stop button (please see 
the information on “Starting, stop-
ping the engine” in Section 2).
8