Page 387 of 448

To minimize the possibility of scratching the lenses and
reducing light output, avoid wiping with a dry cloth. To
remove road dirt, wash with a mild soap solution fol-
lowed by rinsing.
Do not use abrasive cleaning components, solvents, steel
wool or other aggressive material to clean the lenses.
Glass Surfaces
All glass surfaces should be cleaned on a regular basis
with MOPAR Glass Cleaner, or any commercial
household-type glass cleaner. Never use an abrasive type
cleaner. Use caution when cleaning the inside rear win-
dow equipped with electric defrosters or windows
equipped with radio antennas. Do not use scrapers or
other sharp instrument that may scratch the elements.
When cleaning the rear view mirror, spray cleaner on the
towel or cloth that you are using. Do not spray cleaner
directly on the mirror.
Cleaning Plastic Instrument Cluster Lenses
The lenses in front of the instruments in this vehicle are
molded in clear plastic. When cleaning the lenses, care
must be taken to avoid scratching the plastic.
1. Clean with a wet soft cloth. A mild soap solution maybe used, but do not use high alcohol content or
abrasive cleaners. If soap is used, wipe clean with a
clean damp cloth.
2. Dry with a soft cloth.
Seat Belt Maintenance
Do not bleach, dye, or clean the belts with chemical
solvents or abrasive cleaners. This will weaken the fabric.
Sun damage can also weaken the fabric.
If the belts need cleaning, use MOPAR Total Clean, a mild
soap solution, or lukewarm water. Do not remove the
belts from the vehicle to wash them. Dry with a soft cloth.
7
MAINTAINING YOUR VEHICLE 385
Page 432 of 448

Adding Engine Coolant (Antifreeze)............372
Adding Fuel ............................ .287
Adding Washer Fluid ..................... .369
Additives, Fuel .......................... .284
AirBag.................................39 Advance Front Air Bag ....................41
Air Bag Operation .......................42
Air Bag Warning Light ....................50
Event Data Recorder (EDR) .................53
FrontAirBag...........................39
If A Deployment Occurs ...................47
Knee Impact Bolsters .....................43
Maintaining Your Air Bag System ............52
Transporting Pets ........................63
Air Bag Deployment ........................39
Air Bag Light ...................... .50, 66, 134
Air Bag Maintenance .......................52
Air Cleaner, Engine (Engine Air Cleaner Filter) . . . .361
Air Conditioner Maintenance .................366Air Conditioning
......................... .204
Air Conditioning Controls ...................204
Air Conditioning Filter .....................367
Air Conditioning Refrigerant .................366
Air Conditioning System .................204, 366
Air Pressure, Tires ........................ .263
Alarm (Security Alarm) ......................15
Alarm System (Security Alarm) ................15
Alterations/Modifications, Vehicle ...............7
Antifreeze (Engine Coolant) ...............371, 405
Disposal ............................. .374
Anti-Lock Brake System (ABS) ................241
Anti-Lock Warning Light ....................155
Appearance Care ........................ .380
Ashtray ............................... .121
Assist, Hill Start ......................... .249
Audio Systems (Radio) .....................199
Auto Down Power Windows ..................24
Automatic Door Locks ......................22
430 INDEX
Page 442 of 448

Radiator Cap (Coolant Pressure Cap)...........374
Radio Frequency General Information ...................15, 20
Radio Operation ......................... .203
Rear Camera .............................112
Rear ParkSense System .....................107
Rearview Mirrors ..........................72
Recorder, Event Data .......................53
Recreational Towing ...................... .305
Reformulated Gasoline .....................283
Refrigerant ............................. .366
Reminder, Seat Belt .........................26
Remote Sound System (Radio) Controls .........202
Replacement Bulbs ....................... .399
Replacement Keys .........................15
Replacement Parts ........................ .357
Replacement Tires ........................ .273
Reporting Safety Defects ....................423
Restraint, Head ...........................87 Restraints, Child
...........................54
Restraints, Occupant ........................24
Rotation, Tires .......................... .276
Safety Checks Inside Vehicle ..................66
Safety Checks Outside Vehicle .................68
Safety Defects, Reporting ....................423
Safety, Exhaust Gas .........................65
Safety Information, Tire .....................251
Safety Tips ...............................64
Schedule, Maintenance .....................410
Seat Belt Adjustable Upper Shoulder Belt Anchorage ......33
Automatic Locking Retractor (ALR) ...........36
Energy Management Feature ................36
Lap/Shoulder Belt Operation ................30
Lap/Shoulder Belts .......................28
Lap/Shoulder Belt Untwisting ...............32
Pregnant Women ........................35
440 INDEX
Page 447 of 448

INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.