6
Traveller_VP_complement_sieges_enfant_en_Chap10_securite_ed01-16
Key
(a) Universal child seat: child seat that can be
installed in any vehicle using the seat belt.
(b) Group 0: from birth to 10 kg. Infant car
seats and "car cots" cannot be installed on
the front passenger seat(s) or the seats in
row 3.
(c) Consult the legislation in force in your
country before installing your child on this
seat.
(d) To install a child seat at the rear, for ward
facing or rear ward facing, move the seats
in front for ward, then straighten their
backrests to allow sufficient room for the
child seat and the child's legs.
(e) The seat can be installed centrally in the
vehicle but then prevents use of the outer
seats. Refit the head restraint once the child
seat has been removed.
U
Seat suitable for the installation of a child
seat secured using the seat belt and
universally approved, rearward facing and/
or forward facing.
UF Seat suitable for the installation of a child
seat secured using the seat belt and
universally approved forward facing.
X Seat not suitable for the installation of a
child seat of the weight group indicated.
Safety
13
5
Safety
Traveller_VP_complement_sieges_enfant_en_Chap10_securite_ed01-16
Key
(a) Consult the legislation in force in your country before installing a child seat on this seat.
(b) The seat can be installed centrally in the vehicle; it then prevents the use of the
outer seats.
IUF Seat suitable for the installation of an I sofix
U niversal seat, F or ward facing secured
using the upper strap.
IL Seat suitable for the installation of an I sofix
semi-universa L seat either:
- rear ward facing fitted with an upper strap or a support leg,
- for ward facing fitted with a support leg,
- a cot fitted with an upper strap or a support leg.
X Seat not suitable for the installation of an ISOFIX child seat or cot of the weight
group indicated. (1) The installation of a cot on this seat may
prevent the use of one or both of the other
seats in this row.
(2) Installation possible only behind the driver's seat.
(3) Installation possible only behind the driver's seat with individual passenger
seat.
(4) The seat in row 2 must be adjusted so that there is no contact between the child in
row 3 and the seat immediately in front.
(5) The front seat must be adjusted so that there is no contact between the child in
row 2 and the seat immediately in front. Refit the head restraint when the child
seat is removed. For more information on the
ISOFIX
mountings and in particular the
upper strap, refer to the corresponding
section.
