2016 Peugeot Traveller low beam

151
Traveller-VP_en_Chap04_eclairage-et-visibilite_ed01-2016
Automatic headlamp dipping
System which automatically changes between
dipped and main beam according to the
ambient light level and the driving conditions,
using a camera located at the top of the
windscreen
Activation / deactivation
F Put the lighting control stalk ring in the "Au To" or dipped/main beam position.
This automatic headlamp dipping
system is a driving aid.
The driver remains responsible for the
vehicle's lighting and for adapting its
settings to the levels of brightness and
visibility and the traffic conditions.
The system will be operational as soon
as you have exceeded 15 mph (25

km/h).
If the speed drops below 9 mph
(15

km/h), the system no longer
operates. F

F
lash the headlamps
(going beyond the stiff
point) to activate the
function. F

F
lashing the headlamps
again pauses the function
and the lighting system
changes to "automatic
illumination of headlamps".
Pause
The driver can intervene at any time if the
situation requires a change in the state of the
headlamps.
The driver can intervene at any time
if the circumstances dictate by pulling
on the lighting control stalk to switch
between main and dipped beam.
Flashing the headlamps does not
deactivate the system.
The state of the system stays
in memory when the ignition is
switched


off.
4
Lighting and visibility

156
Traveller-VP_en_Chap04_eclairage-et-visibilite_ed01-2016
If a significant accumulation of snow or
ice is present, or when using a bicycle
carrier on the boot, deactivate the
automatic rear wiper. This function is activated by default.
Reverse gear
When reverse gear is engaged, the rear wiper
will come into operation automatically if the
windscreen wipers are operating.
In the vehicle settings menu, activate/
deactivate "Rear wiper in reverse ".
With the audio system
In the "Personalisation-configuration " menu,
activate/deactivate " Rear wipe in reverse
gear ".
With the touch screen Activation / Deactivation
Activation or deactivation of the function is
done in the vehicle configuration menu.
F

P
ull the windscreen wiper stalk towards
you. The screenwash then the wipers
operate for a fixed period.
The headlamp wash is only activated if the
dipped headlamps are on and the vehicle is
moving .
With daytime running lamps, to activate the
headlamp wash, position the lighting stalk in
the dipped beam position.
Windscreen and headlamp
wash
on vehicles fitted with automatic
air conditioning, any action on the
windscreen wash control results in
temporary closing of the air intake to
avoid odours inside the passenger
compartment.
Screenwash/headlamp wash
level low
In the case of vehicles fitted with headlamp
washers, when the fluid reservoir low level
is reached this warning lamp comes on in
the instrument panel, accompanied by an
audible signal and a message.
The warning lamp comes on when the ignition
is switched on, or every time the stalk is
operated, until the reservoir is refilled.
Next time you stop, refill the screenwash /
headlamp wash reservoir.
Lighting and visibility

194
Traveller-VP_en_Chap06_conduite_ed01-2016
When towing
Distribution of loads
F Distribute the load in the trailer so that the
heaviest items are as close as possible to
the axle and the nose weight approaches
the maximum permitted without exceeding it
.
Air density decreases with altitude, thus
reducing engine performance. Above
1

000

metres, the maximum towed load must
be reduced by 10

% for every 1

000 metres of
altitude.
Side wind
F Take into account the increased sensitivity to side wind.
Cooling
Towing a trailer on a slope increases the
temperature of the coolant.
As the fan is electrically controlled, its cooling
capacity is not dependent on the engine speed.
F

T
o lower the engine speed, reduce your
speed.
The maximum towed load on a long incline
depends on the gradient and the ambient
temperature.
In all cases, keep a check on the coolant
temperature.
F

I
f the warning lamp and the
STOP warning lamp come on,
stop the vehicle and switch off
the engine as soon as possible.
Braking
Towing a trailer increases the braking distance.
To avoid overheating of the brakes, the use of
engine braking is recommended.
Ty r e s
F Check the tyre pressures of the towing vehicle and of the trailer, observing the
recommended pressures.
Lighting
F Check the electrical lighting and signalling on the trailer and the headlamp beam
height of your vehicle.
For more information on Weights
, refer
to the corresponding section.
The rear parking sensors will be
deactivated automatically to avoid the
audible signal if a genuine P
e

ugeo
T
t

owbar is used.
If the ambient temperature is high, it
is recommended that the engine be
allowed to idle for 1 to 2 minutes after
the vehicle comes to a stop, to facilitate
its cooling. For more information on Adjusting the
headlamp beam height
, refer to the
corresponding section.
Driving

299
Traveller-VP_en_Chap08_en-cas-de-panne_ed01-2016
Front lamps
Xenon headlamps
For more information on Changing a bulb
and in particular the types of bulb, refer to the
corresponding section.
Halogen headlamps
For more information on Changing a bulb
and in particular the types of bulb, refer to the
corresponding section.
For H7 type bulbs with lugs... take care
to observe their correct installation
so as to ensure the best lighting
performance.
Front fog lamps
Ty p e D , H11 - 5 5 W
In some weather conditions (e.g. low
temperature or humidity), the presence
of misting on the internal sur face of the
glass of the headlamps and rear lamps
is normal; it disappears after the lamps
have been on for a few minutes.
1.
M

ain beam headlamps.
Ty

p e C , H1- 55W
2.
D

ipped beam headlamps.
Ty

p e E , D8S 25W
3.
D

irection indicators.
Ty

p e B , PY21W-21W (amber)
1.


Sidelamps.
Ty

p e A , W5W-5W
2.
M

ain beam headlamps.
Ty

p e C , H1- 55W
3.
D

ipped beam headlamps.
Ty

p e C , H7- 5 5 W
4.
D

aytime running lamps.
Ty

p e A , W21W LL-21W
5.
D

irection indicators.
Ty

p e B , PY21W-21W (amber)
8
In the event of a breakdown

301
Traveller-VP_en_Chap08_en-cas-de-panne_ed01-2016
When refitting the connector and bulb
in the lamp, push the assembly into its
housing until it clicks into place.
Dipped beam headlamps
(halogen headamps)
Ty p e C , H7- 5 5 W
Daytime running lamps
(halogen headlamps)
Ty p e A , W21W LL-21W
Sidelamps
(halogen headlamps)
Ty p e A, W5W
F

P

ress the upper clip on the cover then tip it
rear wards to remove it.
F

P

ress the lower clip on the electrical
connector and remove the assembly of
connector and bulb.
F

P

ull the bulb out and change it.
To refit, carry out these operations in reverse
o r d e r. F

P

ress the upper clip on the cover then tip it
rear wards to remove it.
F

P

ress the two side clips on the electrical
connector and remove the assembly of
connector and bulb.
F

P

ull out the bulb and change it.
To refit, carry out these operations in reverse
o r d e r. F

P
ress the upper clip on the cover then tip it
rear wards to remove it.
F

P
ress the two side clips on the electrical
connector and remove the assembly of
connector and bulb.
F

P
ull the bulb out and change it.
To refit, carry out these operations in reverse
o r d e r.
8
In the event of a breakdown

302
Traveller-VP_en_Chap08_en-cas-de-panne_ed01-2016
Be aware that the area behind the right-
hand headlamp (facing forwards) may
be hot, with the risk of burns (over flow
p i p e). Faster flashing of a direction indicator
warning lamp (left or right) indicates a
failed bulb on that side.
Direction indicators
(halogen headlamps)
Ty p e B
, PY21W-21W (amber)
Main beam headlamps
(halogen headlamps)
Ty p e C, H1- 55W
F
P
ress the upper clip on the cover then tip it
rear wards to remove it.
F

P
ress the lower clip on the electrical
connector and remove the assembly of
connector and bulb.
F

P
ull the bulb out and change it.
To refit, carry out these operations in reverse
o r d e r. F

P
ress the upper clip on the cover then tip it
rear wards to remove it.
F

T
urn the bulb holder a quarter turn anti-
clockwise.
F

R
emove the bulb holder.
F

C
hange the failed bulb.
To refit, carry out these operations in reverse
o r d e r.
In the event of a breakdown

303
Traveller-VP_en_Chap08_en-cas-de-panne_ed01-2016
Dipped beam headlamps
(xenon headlamps)
Ty p e E , D8S 25W
F
P
ress the upper clip on the cover then tip it
rear wards to remove it.
F

T
urn the bulb holder a quarter turn anti-
clockwise.
F

C
hange the failed bulb.
To refit, carry out these operations in reverse
o r d e r.
Replacement of D8S xenon bulbs must
be done by a P
e

ugeo
T d
ealer or a
qualified workshop as there is a risk of
electrocution.
It is recommended that both D8S bulbs
be replaced at the same time, in the
event of the failure of one of them.
Main beam headlamps
(xenon headlamps)
Ty p e C , H1- 55W
When refitting the connector and bulb
in the lamp, push the assembly into its
housing until it clicks into place. Faster flashing of a direction indicator
warning lamp (left or right) indicates a
failed bulb on that side.
Direction indicators
(xenon headlamps)
Ty p e B
, PY21W-21W (amber)
F

P

ress the upper clip on the cover then tip it
rear wards to remove it..
F

P

ress the lower clip on the electrical
connector and remove the assembly of
connector and bulb.
F

P

ull the bulb out and change it.
To refit, carry out these operations in reverse
o r d e r.
8
In the event of a breakdown

496
Traveller-VP_en_Chap11_index-alpha_ed01-2016
ABS ...............................................................159
Access, AdBlue tank ..................................... 280
Accessories


.................................................. 267
Access to the spare wheel
............................292
Active Safety Brake......................... 21, 239, 242
AdBlue
® ..................................... 2 4, 33, 278 -281
Additive, Diesel ..................................... 275, 276
Adjusting headlamp beam height
................. 15

3
Adjusting front seats


................................. 87, 90
Adjusting head restraints


..........................91, 93
Adjusting the air distribution


.................125, 129
Adjusting the air flow


............................. 127, 129
Adjusting the date


........................... 44, 410, 466
Adjusting the height and reach of the steering wheel


.................................... 87
Adjusting the lumbar support


....................88, 92
Adjusting the seat belt height


.......................16 4
Adjusting the temperature
.................... 12

5, 127
Adjusting the time


........................... 44, 411, 467
Advice on driving


................................... 192-19 4
Airbags


............................................ 22, 168, 176
Airbags, curtain
..................................... 17

1, 172
Airbags, front ......................................... 16 9, 172
Airbags, lateral


...................................... 170, 172
Air conditioning, dual-zone automatic


...1 2 7, 1 3 4
Air conditioning, manual


.......125, 131, 13 4, 13 5 Battery


...........................................276, 316 - 320
Battery capacity
...............................

.............320
Battery, charging


...........................................318
Battery, remote control
............... 5

1, 62, 63, 138
Bench seat, one-piece, fixed


..........................95
Blind, panoramic roof


....................................120
Blind spot monitoring system
...........2 7, 2 4 9 - 2 51
Blinds, side


....................................................118
BlueHDi


....................................29, 33, 204, 278
Bluetooth (telephone)


...................396, 452, 487
Bonnet


...........................................................271Cable, audio


.........................................388, 444
Capacity, fuel tank
..............................

..........261
Cap, fuel filler
................................................261
CarPlay connection ...............................376, 432
CD, MP3
........................................................ 48

4
Central locking


..........................................45, 52
Changing a bulb


.............................................298
Changing a bulb (side-hinged doors)
........... 3

05
Changing a bulb (tailgate)


.............................308
Changing a fuse


............................................311
Changing a wheel


.........................................291
Changing a wiper blade


........................1 5 7, 2 6 9
Changing the remote control battery


........51, 6 2
Checking the engine oil level


..................32, 273
Checking the levels


...............................273-275
Checking tyre pressures (using the kit)
........290
Checks
...............

...........................272, 276, 277
Air intake


...............................................
125, 13 4
Alarm

...............................................................
83
Anti-lock braking system (ABS) ....................
159
Anti-pinch

........................................................
86
Anti-theft

...........................................
49, 59, 201
Armrest, front ..................................................
91
ASR

...............................................................
159
Assistance call

......................................
15 8, 328
Assistance, emergency braking
........... 15
9, 243
Audible warning

............................................
159
Audio streaming (Bluetooth)
........ 3
88, 444, 485
Audio system (radio) .......
77, 148 -150, 152, 153,
156, 216, 222, 241, 243,
245, 247, 250, 253, 260, 473
Auxiliary

...............................................
388, 444
A
B
C
Boot ......................................... 56, 58, 61, 79, 81
Brake discs .................................................... 2
77
Brake lamps
......................... 3

05, 306, 308, 309
Brakes


....................................................... 16, 20
Braking, automatic emergency


.................................... 21, 239, 242
Bulbs (changing)
...............................

............298
180° rear vision

............................................. 255
Alphabetical index