2016 Peugeot 301 wiper blades

57
301_en_Chap03_confort_ed01-2016
Rear screen demist - defrost
The control button is located on the heating / ventilation or air conditioning system control
panel.
Switching on
The rear screen demisting/defrosting can only
operate when the engine is running.
F
P
ress this button to demist /defrost the
rear screen and (depending on version)
the door mirrors. The indicator lamp
associated with the button comes on.
Switching off
The demisting/defrosting switches off
automatically to prevent an excessive
consumption of current.
F

I
t is possible to stop the demisting/
defrosting operation before it is switched
off automatically by pressing the button
again. The indicator lamp associated with
the button goes off.
F

S
witch off the demisting/defrosting of the
rear screen and door mirrors, if fitted,
as soon as appropriate, as lower current
consumption results in reduced fuel
consumption.
Heated lower windscreen*
In cold conditions, the heated rear window
switch also allows the lower windscreen to be
heated, so as to free the wiper blades when
frozen to the glass by frost or snow.
The function is active when the ambient
temperature is below 0°C.
* Depending on the country of sale.
3
Comfort

98
301_en_Chap06_visibilite_ed01-2016
Special position of
the windscreen wipers
This position permits release of the windscreen
wiper blades.
It is used for cleaning or replacement of the
wiper blades. It can also be useful, in winter, to
release the wiper blades from the windscreen. To maintain the effectiveness of the
wiper blades, it is advisable to:
-

h
andle them with care,
-

c
lean them regularly using soapy
water,
-

a
void using them to retain
cardboard on the windscreen,
-

r
eplace them at the first signs of
w e a r.
F

A
ny action on the wiper stalk within one
minute after switching off the ignition,
places the wiper blades vertically on the
screen.
F

T
o park the wiper blades again, switch on
the ignition and operate the wiper stalk.
Visibility

169
301_en_Chap09_info-pratiques_ed01-2016
Changing a wiper blade
Before removing a front
wiper blade
F Within one minute after switching off the ignition, operate the wiper stalk to
position the wiper blades vertically on
the


windscreen.
Removing
F Raise the corresponding wiper arm.
F U nclip the wiper blade and remove it.
Fitting
F Put the corresponding new wiper blade in place and clip it.
F

F
old down the wiper arm carefully.
After fitting a front wiper
blade
F Switch on the ignition.
F O perate the wiper stalk again to park the
wiper blades.
9
Practical information

251
301_en_Chap14_index-alpha_ed01-2016
Under-inflation (detection) ............................10 1
Unlocking .............................. ..........................33
Unlocking the boot
.......................................... 33
UREA


.................................................... 13 3, 13 4Windscreen, heated
........................................57
Wiper blades (changing) ......................... 9
8, 169
Wipers


.............................................................97
Ventilation
..............................

.........8, 49 -51, 53
Warning and indicator lamps


..............11, 15, 16
Warning lamp, braking system


.......................17
Warning lamp, Diesel engine pre-heater


..............................13
Warning lamps


................................................ 16
Warning lamp, SCR emissions control system

.............................................. 2

2
Washing (advice) ...........................175, 181, 182
Weights


................................................. 189, 191
Wheel, spare


......................................... 145, 146
Window controls


............................................. 42
U
V
W
.
Alphabetical index