2016 NISSAN X-TRAIL Lower arm


> (GLW    0RGHO 7$@
1-4
Safety Ðseats, seatbelts andsupplement alrestraint system
JVR0334X
Forward andbackward:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Move forward orbackward theadjusting switch
*
1
to
the desired position.
Reclining:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Move forward orbackward theadjusting switch
*
2
to
the desired position.
The reclining featureallowstheadjustment ofthe
seatback foroccupants ofdifferent sizestohelp obtain
the proper seatbeltfit.(See ªSeat beltsº (P.1-9) .)
The seatback maybereclined toallow occupants to
rest when thevehicle isparked. Seat
lifter (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVR0119X
Pull uporpush down theadjusting switchtoadjust the
seat height untilthedesired position isachieved. Lumbar
support (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
SSS1053
The lumbar support featureprovides lowerback
support tothe driver.
Push eachsideofthe adjusting switchtoadjust the
seat lumbar areauntilthedesired position isachieved.
Heated seats(ifequipped)
T32A130 827-12F30A0 0-21DA-4474-BB84-80C 0B5836ADB
JVR0322X
The front seats canbewarmed bybuilt-in heaters. The
switches locatedonthe center console canbe
operated independently ofeach other.
1. Start theengine.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2. Select heatrange.
.
For high heat, push theHI(High) sideofthe
switch
*
1
.
.
For low heat, push theLO (Low) sideofthe
switch
*
2
.
.
The indicator light
*
3
will illuminate whenlow
or high isselected.
3. To turn offthe heater, returntheswitch tothe level
position. Makesuretheindicator lightturns off.
The heater iscontrolled byathermostat, auto-
matically turningtheheater onand off.The
indicator lightwillremain onaslong asthe switch
is on.
When thevehicle's interioriswarmed, orbefore
you leave thevehicle, besure toturn offthe
switch.
CAUTION:
. The battery couldrundown ifthe seat heater
is operated whiletheengine isnot running.
. Do not use theseat heater forextended
periods orwhen noone isusing theseat.
. Do not putanything onthe seat which
insulates heat,suchasablanket, cushion,
seat cover, etc.Otherwise, theseat may
become overheated.
. Donot place anything hardorheavy onthe
seat orpierce itwith apin orsimilar object.
This may result indamage tothe seat heater.
. Any liquid spilled onthe heated seatshould
be removed immediately withadry cloth.
. When cleaning theseat, never usegasoline,
thinner, orany similar materials.
SECOND ROWSEATS
T32A1308 27-3C9448 50-5F36-4EC0 -8FC1-B5D4740BE525
Adjustment
T32A130 827-C4C392 1B-4C08-4E61-8F01-E53B D4BE934 E
JVR0330X
Forward andbackward:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Pull upthe adjusting lever
*
1
.
2. Slide theseat tothe desired position.
3. Release theadjusting lever
*
1
to lock theseat in
position.
Reclining:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Pull theadjusting lever
*
2
.
2. Tiltthe seatback tothe desired position.
3. Release theadjusting lever
*
2
to lock the
seatback inposition.
The reclining featureallowstheadjustment ofthe
seatback foroccupants ofdifferent sizestohelp obtain
the proper seatbeltfit.(See ªSeat beltsº (P.1-9) .)
The seatback maybereclined toallow occupants to
rest when thevehicle is
parked.
JVR0376X
Folding:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Forvehicles notequipped withthird rowseat: Pull
up the lever
*
1
and foldtheseatback flat.
For vehicles equipped withthird rowseat: Pullup
the lever
*
1
and pullthestrap
*
2
on the lower
side ofthe outboard seatstofold theseatback flat.
2. To return theseats toaseating position, pushup
on the seatback untilitlatches inplace.
WARNING:
. Never allowanyone toride inthe luggage
area oron the rear seats when theyarein
the fold-down position.Useofthese areas
by passengers withoutproperrestraints
could result inserious injuryinan accident
or sudden stop.
. Donot fold down thesecond rowseats when
occupants areinthe second rowseat area or
any luggage ison the second rowseats.
. Properly secureallluggage tohelp prevent it
from sliding orshifting. Donot place lug-
gage higher thantheseatbacks.
Safety Ðseats, seatbelts andsupplement alrestraint system
1-5
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
screen fromtheAround ViewMonitor screenwhen:
. The shift lever isin the ªDº (Drive) position (CVT
model) orthe shift lever isout ofthe ªRº (Reverse)
position (MTmodel) ,and thevehicle speed
increases aboveapproximately 10km/h (6MPH) .
. Adifferent screenisselected.
CAMERA AIDINGCORNER SENSOR
FUNCTION (ifequipped)
GUID-0AEEE3 77-4208-4A32-97B6-7 30A3A05647 0
When thecorner ofthe vehicle movesclosertothe
object whiletheAround ViewMonitor isdisplayed, an
indicator isdisplayed andatone issounded bythe
corner sensor function towarn thedriver.
The color ofthe corner sensor indicator andthe
pattern ofthe tone varyaccording tothe distance to
the object.
K eep thecorner sensors (located onthe front andrear
bumper fascia)freefrom snow,ice and large
accumulations ofdirt. Donot clean thesensors with
sharp objects. Ifthe sensors arecovered, theaccuracy
of the corner sensor function willbediminished.
The tone sound andthesensor indicator displaycan
be turn on/off, andthevolume ofthe tone sound and
the sensor detection rangecanbeadjusted. (See
ªDriver Assistanceº (P.2-21) .)
WARNING:
. The corner sensor function isnot designed
to prevent theobject.
. The colors ofthe corner sensor indicator and
the distance guidelinesinthe front/rear
view indicate different distances tothe
object.
. Inclement weathermayaffect thefunction of
the corner sensor system; thismay include reduced
performance orafalse activation.
. This function isdesigned asan aid tothe
driver indetecting largestationary objectsto
help avoid damaging thevehicle. Thesystem
will notdetect smallobjects belowthe
bumper, andmay notdetect objects that
are too close tothe bumper oron the
ground.
. Ifyour vehicle sustains damagetothe
bumper fascia,leaving itmisaligned orbent,
the sensing zonemaybealtered causing
inaccurate measurement ofobstacles or
false alarms.
CAUTION:
Keep theinterior ofthe vehicle asquiet as
possible tohear thetone clearly.
MOVING OBJECTDETECTION (MOD)
FUNCTION (ifequipped)
GUID-6CAFFD 96-0FA6-42CB-8 531-35613FD16A94
The Moving ObjectDetection (MOD)system can
inform thedriver ofmoving objects whendriving outof
garages, maneuvering intoparking lotsand inother
such instances.
The MOD system detects movingobjects byusing
image processing technologyonthe image shown on
the display .The rear view camera isequipped withthe
automatic washerfunction usingwindow washerfluid.
The MOD system operates inthe following conditions
when thecamera viewisdisplayed:
. When theshift lever isin the ªPº (Park) orªNº
(Neutral) position(CVTmodel) orthe shift lever is
out ofthe ªRº (Reverse) position(MTmodel) and
the vehicle isstopped, theMOD system detects
the moving objects inthe bird's-eye view.The MOD
system willnotoperate ifthe outside mirror
is moving inor out orifeither doorisopened.
. When theshift lever isin the ªDº (Drive) position
(CVT model) orthe shift lever isout ofthe ªRº
(Reverse) position(MTmodel) ,and thevehicle
speed isbelow approximately 8km/h (5MPH) ,
the MOD system detects movingobjects inthe
front view.
. When theshift lever isin the ªRº (Reverse)
position andthevehicle speedisbelow approxi-
mately 8km/h (5MPH) ,the MOD system detects
moving objects inthe rear view.The MOD system
will notoperate ifthe back doorisopen.
The MOD system doesnotdetect moving objects in
the front-side view.The MOD iconisnot displayed on
the screen wheninthis view .
WARNING:
. The MOD system isnot asubstitute for
proper vehicle operation anddoes notpre-
vent contact withtheobjects surrounding
the vehicle. Whenmaneuvering, alwaysuse
the outside mirrorandinside rearview mirror
and turn andlook tocheck thesurroundings
to make sureitis safe tomaneuver.
. The system isdeactivated atspeeds above
10 km/h (6MPH) .It is reactivated atlower
speeds.
. The system isnot designed toprevent
contact withallobjects.
. The MOD system isnot designed todetect
surrounding stationaryobjects.
When theMOD system detects amoving object
surrounding thevehicle, theyellow framewillbe
displayed onthe view where theobjects aredetected
Display screen,heaterandairconditioner ,and audio system
4-15
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
T emperature control:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T urn thetemperature controldialtoset the desired
temperature.
. When theDUAL indicator lightisnot illuminated,
pushing theªDUAL ºbutton (theindicator lightwill
turn on)allows theuser toindependently change
the driver andpassenger sidetemperatures with
the corresponding temperaturecontroldial.
. To cancel theseparate temperature setting,push
the ªDUAL ºbutton (theindicator lightwillturn off)
and thedriver's sidetemperature settingwillbe
applied toboth thedriver andpassenger sides.
Outside aircirculation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o turn onthe outside aircirculation mode,pushtheair
recirculation ª
º button. (Theindicator lightwillturn
off.) Theairflow isdrawn fromoutside thevehicle.
Select theoutside aircirculation modefornormal
heating orair conditioning operation.
Air recirculation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Push theairrecirculation ª
º button tocirculate the
air flow inside thevehicle. (Theindicator lightwillturn
on.)
SERVICING AIRCONDITIONER
T32A1308 27-02B6A73 5-AE1C-4FF1-853B-0711EFF486D 2
WARNING:
The airconditioner systemcontains refrigerant
under highpressure. To avoid personal injury,
any airconditioner serviceshouldbedone only
by an experienced technicianwiththeproper
equipment.
The airconditioner systeminyour vehicle ischarged
with arefrigerant designedwiththeenvironment in
mind. This
refrigerant willnotharm theearth's ozone
layer. However, itmay contribute inasmall partto
global warming.
Special charging equipment andlubricant arerequired
when servicing yourvehicle's airconditioner. Using
improper refrigerants orlubricants willcause severe
damage tothe airconditioner system.(SeeªAir
conditioner systemrefrigerant andlubricantº (P.9-5) .)
A NISSAN dealerwillbeable toservice your
environmentally friendlyairconditioner system.
Air conditioner filter
T32A1308 27-BC1D1D 75-3B43-4C79-840F- 3711FA078F40
The airconditioner systemisequipped withanair
conditioner filter.To make suretheairconditioner
heats, defogs, andventilates efficiently,replace the
filter according thespecified maintenance intervals
listed inaseparate maintenance booklet.To replace
the filter, contact aNISSAN dealer.
The filter should bereplaced ifthe airflow decreases
significantly orifwindows fogupeasily whenoperating
the heater orair conditioner.
T32A130 827-CF902 764-54DB-460C-9CCD -891B42007577
AUDIO OPERATIONPRECAUTIONS
T32A1308 27-4E34C5 BD-9452-4AC 0-A824-D0DEB1BDEF8C
WARNING:
Do not adjust theaudio system whiledriving so
that fullattention maybegiven tovehicle
operation.
Radio
T32A1308 27-060119 93-01E3-49 CF-A636-2952299CE 1E0
. Radio reception isaffected bystation signal
strength, distancefromradio transmitter, build-
ings, bridges, mountains andother external
influences. Intermittent changesinreception
quality normally arecaused bythese external
influences.
. Using acellular phoneinor near thevehicle may
influence radioreception quality.
. Some cellular phones orother devices maycause
interference orabuzzing noisetocome fromthe
audio system speakers. Storingthedevice ina
different locationmayreduce oreliminate the
noise.
Compact Disc(CD) player
T32A1308 27-868CE57 C-F62C-4BE 4-8BE4-61333EF23B5F
. During coldweather orrainy days, theplayer may
malfunction duetothe humidity .If this occurs,
remove theCD from CDplayer anddehumidify or
ventilate theplayer completely .
. The player mayskipwhile driving onrough roads.
. The CDplayer sometimes maynotfunction when
the passenger compartment temperatureisex-
tremely high.Lower thetemperature beforeuse.
. Donot expose theCD todirect sunlight.
. CDs thatareofpoor quality ,or are dirty,
scratched, coveredwithfingerprints, orthat have
pin holes maynotwork properly .
Display screen,heaterandairconditioner ,and audio system
4-35
AUDIO
SY STEM (ifequipped)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
7-2
Appear anceandcare
T32A1308 27-B546E8 D4-F62E-4E44-86B7-FD A25D20C022
In order tomaintain theappearance ofyour vehicle, itis
important totake proper careofit.
Whenever possible,parkyourvehicle insideagarage
or inacovered areatominimize thechances of
damaging thepaint surface ofyour vehicle.
When itis necessary topark outside, parkinashady
area orprotect thevehicle withabody cover. Be
careful nottoscratch thepaint surface when
putting onorremoving thebody cover.
W ASHING
T32A130827-7 5EA71EE-82C3-45D9-8 9B6-534587A2F13A
In the following instances, washyourvehicle assoon
as possible toprotect thepaint surface:
. After arainfall, whichmaycause thepaint surface
damage fromacidrain.
. After driving oncoastal roads,whichmaycause
rusting fromthesea breeze.
. When contaminants suchassoot, birddroppings,
tree sap, metal particles orbugs getonthe paint
surface.
. When dustormud builds uponthe paint surface.
1. Wash thevehicle surface withawet sponge and
plenty ofwater.
2. Clean thevehicle surface gentlyandthoroughly
using amild soap, aspecial vehiclesoapora
general purpose dishwashing liquidmixed with
clean, lukewarm (neverhot)water.
CAUTION:
. Donot wash thevehicle withstrong house-
hold soap, strong chemical detergents, ga-
soline orsolvents.
. Donot wash thevehicle indirect sunlight or
while thevehicle bodyishot, asthe paint
surface maybecome water-spotted. .
Avoid usingtight-napped orrough cloths,
such aswashing mitts.Caremust betaken
when removing caked-ondirtorother for-
eign substances sothe paint surface isnot
scratched ordamaged.
3. Rinse thevehicle thoroughly withplenty ofclean
water.
4. Use adampened chamoistodry the paint surface
and avoid leaving waterspots.
When washing thevehicle, takecare ofthe following:
. Inside flanges, jointsandfolds onthe doors,
hatches andhood areparticularly vulnerabletothe
effects ofroad salt.Therefore, theseareasmust
be cleaned regularly.
. Besure thatthedrain holes inthe lower edgeof
the doors arenot clogged.
. Spray watertothe underbody andinthe wheel
wells toloosen thedirt and/or washawayroad
salt.
REMOVING SPOTS
T32A1308 27-D69C8C6 E-23D2-464A-971C-BACAC 95FCE20
Remove tarand oilspots, industrial dust,insects, and
tree sapasquickly aspossible fromthepaint surface
to avoid lasting damage orstaining. Specialcleaning
products areavailable ataNISSAN dealerorany
automotive accessorystore.
W AXING
T32A130827- D9B96C11-516D-48E7- 8EEB-9F4E4A00E581
Regular waxingprotects thepaint surface andhelps
maintain anew vehicle appearance.
After waxing, polishing isrecommended toremove
built-up residueandtoavoid aweathered appearance.
A NISSAN dealercanassist youinchoosing the
appropriate waxingproducts.
CAUTION:
. Wash yourvehicle thoroughly andcomple-
tely before applying waxtothe paint surface.
. Always followthemanufacturer's instruc-
tions supplied withthewax.
. Donot use awax containing anyabrasives,
cutting compounds orcleaners thatmay
damage thevehicle finish.
Machine compounding oraggressive polishingona
base coat/clear coatpaint finish maydullthefinish or
leave swirlmarks.
GLASS
T32A130 827-EF64A8 17-F9D8-41D 9-9211-AFD2A86FD09E
Use glass cleaner toremove smokeanddust filmfrom
the glass surfaces. Itis normal forglass tobecome
coated withafilm after thevehicle isparked inthe hot
sun. Glass cleaner andasoft cloth willeasily remove
this film.
CLEANING EXTERIOR
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-22
Maintenance anddo-it-yours elf
.
Make surethatthe+side faces thebottom of
the case
*
B
.
3. Close thelidsecurely .
4. Operate thebuttons tocheck itsoperation.
See aNISSAN dealerifyou need assistance for
replacement.
FCC Notice:
For USA:
This device complies withPart15ofthe FCC
Rules. Operation issubject tothe following two
conditions: (1)This device maynotcause harm-
ful interference, and(2)this device mustaccept
any interference received,including interference
that may cause undesired operation.
Note: Changes ormodifications notexpressly
approved bythe party responsible forcompli-
ance could voidtheuser's authority tooperate
the equipment.
For Canada:
This device complies withIndustry Canada
licence-exempt RSSstandard(s) .Operation is
subject tothe following twoconditions: (1)this
device maynotcause interference, and(2)this
device mustaccept anyinterference, including
interference thatmay cause undesired operation
of the device.
INTELLIGENT KEYBATTER Y
T32A130827-0 795585A-4590-40CB-B 4DD-549A1FA4DDE8
Battery replacement
T32A1308 27-C7C6166A -C4F7-4BA4-94AA-A78E88 2D4D47
CAUTION:
. Becareful nottoallow children toswallow
the battery andremoved parts.
. Animproperly disposedbatterycanharm
the environment. Alwaysconfirm localreg-
ulations forbattery disposal.
. When changing batteries, donot letdust or
oil get onthe components.
. There isdanger ofexplosion ifthe lithium
battery isincorrectly replaced.Replaceonly
with thesame orequivalent
type.
JVM0317X
T o replace thebattery:
1. Release thelock knob atthe back ofthe key and
remove themechanical key.(See ªMechanical
keyº (P.3-4) .)
2. Insert aflat-blade screwdriver wrappedwitha
cloth intotheslitofthe corner andtwist itto
separate theupper partfrom thelower part.
3. Replace thebattery withanew one.
.
Recommended battery:CR2032 orequivalent
.
Do not touch theinternal circuitandelectric
terminals asdoing socould cause amalfunc-
tion.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
.
Make surethatthe+side faces thebottom of
the case.
SDI2452
4. Align thetips ofthe upper andlower parts
*
1
,
and then push them together untilitis securely
closed
*
2
.
5. Operate thebuttons tocheck itsoperation.
See aNISSAN dealerifyou need assistance for
replacement.
FCC Notice:
For USA:
This device complies withPart15ofthe FCC
Rules. Operation issubject tothe following two
conditions: (1)This device maynotcause harm-
ful interference, and(2)this device mustaccept
any interference received,including interference
that may cause undesired operation.
Note: Changes ormodifications notexpressly
approved bythe party responsible forcompli-
ance could voidtheuser's authority tooperate
the equipment.
For Canada:
This device complies withIndustry Canada
licence-exempt RSSstandard(s) .Operation issubject
tothe following twoconditions: (1)this
device maynotcause interference, and(2)this
device mustaccept anyinterference, including
interference thatmay cause undesired operation
of the device.
T32A1308 27-124166 77-0A48-4E6 6-B067-4EB7 C158E2E4
The variable voltagecontrolsystem measures the
amount ofelectrical discharge fromthebattery and
controls voltagegenerated bythe alternator.
CAUTION:
. Do not ground accessories directlytothe
battery terminal. Doingsowill bypass the
variable voltagecontrolsystemandthe
vehicle battery maynotcharge completely.
. Use electrical accessories withtheengine
running toavoid discharging thevehicle
battery.
Maintenance anddo-it-yours elf
8-23
V
ARIABLE VOLTAGE CONTROL
S Y STEM (ifequipped)
&RQGLWLRQ
([FHSWIRU&KLQD