2016 NISSAN X-TRAIL Control arm


> (GLW    0RGHO 7$@
T32A130 827-64068 8FC-866B- 4E18-8CE1-3 64B86D3233 C
JVC0654X
1. Inside rearview mirror(P.3-28)
2. Sunglasses holder(P.2-55)
3. Front maplights (P.2-62)
Ð Microphone* (P.4-78, P.4-84, P.4-87, P.4-94
, P.4-98)
4. Sunroof* (P.2-52)
5. Cancel switchforultrasonic andtiltsensors*
(P .3-20)
6. Sunvisors (P.2-61, P.3-29) 7.
Room light*(P.2-62)
8. Rearpersonal lights*(P.2-63)
9. Coathook(Driver's side)(P.2-59)
10. Reararmrest (Second rowseats) (P.1-7)
Ð Rear cupholders (P.2-55)
11. Doorarmrest
Ð Power window switch(P.2-50)
Ð Power doorlockswitch* (P.3-6)
Ð Outside rearview mirrorremote control
switch (Driver's side)(P.3-29) 12.
Front cupholders (P.2-55)/Ashtray* (P.2-54)
13. Heated seatswitch* (P.1-4)
14. Console box(P.2-55)
15. Luggage room
Ð Storages (P.2-54)
Ð Luggage hooks(P.2-57)
Ð Tonneau cover*(P.2-60)
Ð Power outlet (P.2-53)
Ð Spare tire(P.6-2)
*: ifequipped
Illustrated tableofcontents
0-5
P
ASSENGER COMPARTMENT
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2. Select heatrange.
.
For high heat, push theHI(High) sideofthe
switch
*
1
.
.
For low heat, push theLO (Low) sideofthe
switch
*
2
.
.
The indicator light
*
3
will illuminate whenlow
or high isselected.
3. To turn offthe heater, returntheswitch tothe level
position. Makesuretheindicator lightturns off.
The heater iscontrolled byathermostat, auto-
matically turningtheheater onand off.The
indicator lightwillremain onaslong asthe switch
is on.
When thevehicle's interioriswarmed, orbefore
you leave thevehicle, besure toturn offthe
switch.
CAUTION:
. The battery couldrundown ifthe seat heater
is operated whiletheengine isnot running.
. Do not use theseat heater forextended
periods orwhen noone isusing theseat.
. Do not putanything onthe seat which
insulates heat,suchasablanket, cushion,
seat cover, etc.Otherwise, theseat may
become overheated.
. Donot place anything hardorheavy onthe
seat orpierce itwith apin orsimilar object.
This may result indamage tothe seat heater.
. Any liquid spilled onthe heated seatshould
be removed immediately withadry cloth.
. When cleaning theseat, never usegasoline,
thinner, orany similar materials.
SECOND ROWSEATS
T32A1308 27-3C9448 50-5F36-4EC0 -8FC1-B5D4740BE525
Adjustment
T32A130 827-C4C392 1B-4C08-4E61-8F01-E53B D4BE934 E
JVR0330X
Forward andbackward:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Pull upthe adjusting lever
*
1
.
2. Slide theseat tothe desired position.
3. Release theadjusting lever
*
1
to lock theseat in
position.
Reclining:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Pull theadjusting lever
*
2
.
2. Tiltthe seatback tothe desired position.
3. Release theadjusting lever
*
2
to lock the
seatback inposition.
The reclining featureallowstheadjustment ofthe
seatback foroccupants ofdifferent sizestohelp obtain
the proper seatbeltfit.(See ªSeat beltsº (P.1-9) .)
The seatback maybereclined toallow occupants to
rest when thevehicle is
parked.
JVR0376X
Folding:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Forvehicles notequipped withthird rowseat: Pull
up the lever
*
1
and foldtheseatback flat.
For vehicles equipped withthird rowseat: Pullup
the lever
*
1
and pullthestrap
*
2
on the lower
side ofthe outboard seatstofold theseatback flat.
2. To return theseats toaseating position, pushup
on the seatback untilitlatches inplace.
WARNING:
. Never allowanyone toride inthe luggage
area oron the rear seats when theyarein
the fold-down position.Useofthese areas
by passengers withoutproperrestraints
could result inserious injuryinan accident
or sudden stop.
. Donot fold down thesecond rowseats when
occupants areinthe second rowseat area or
any luggage ison the second rowseats.
. Properly secureallluggage tohelp prevent it
from sliding orshifting. Donot place lug-
gage higher thantheseatbacks.
Safety Ðseats, seatbelts andsupplement alrestraint system
1-5
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
W ater-in-fuel-filter warninglight(diesel
engine model)
T32A1308 27-8784F72 3-B4A8-44B C-8916-AD5C9D6C8DAA
If the water-in-fuel-filter warninglightilluminates while
the engine isrunning, contactaNISSAN dealeras
soon aspossible.
CAUTION:
Continuing vehicleoperation withoutproperly
draining couldcause serious damage tothe
engine.
INDICA TOR LIGHTS
T32A1308 27-407903 45-29A6-447 1-B7F0-97F981B3FB6 6
Dipped beamindicator light(if
equipped)
T32A1308 27-EE027B 81-0279-43 24-A0E9-015 0C2576917
The dipped beamindicator lightilluminates whenthe
headlight lowbeam ison. (See ªHeadlight andturn
signal switchº (P.2-39) .)
Door lockindicator light(ifequipped)
GUID-36B17 27D-9484-4156-A6C8-7B1BFAD5C37 3
The door lockindicator light,located onthe instrument
panel, illuminates whenallthe doors arelocked.
. With theignition switchinthe ªONº position, the
door lockindicator lightwillilluminate andstay on
when thedoors arelocked usingthepower door
lock switch.
. With theignition switchinthe ªOFFº orªLOCKº
position, thedoor lockindicator lightwilloperate
as follows:
Ð When thedoors arelocked withthepower
door lockswitch, thedoor lockindicator light
will illuminate for30 minutes. Ð
When thedoors arelocked bypushing the
ªL OCKº button (ontheremote controller or
Intelligent Key) orthe request switch(Intelli-
gent Key system equipped models),the door
lock indicator lightwillilluminate for1minute.
The door lockindicator lightturns offwhen anydoor is
unlocked.
For locking orunlocking doors,seeªDoor locksº (P.3-
4) .
ECO mode system indicator light(if
equipped)
GUID-424 9E8B4-00 39-4825-A92 9-886FADA4F09C
The ECO mode indicator lightilluminates whenthe
ECO mode system isturned on.
(See ªECO modesystemº (P.5-47) .
Four-Wheel Drive(4WD) AUTOin-
dicator light(4WD model)
T32A130 827-6E75C3 24-BD83-49D6-B3ED- A01014603 822
When theignition switchisin the ªONº position, the
Four-Wheel Drive(4WD) AUTOindicator lightillumi-
nates andthen turns off.
When selecting 4WDAUTOmode whiletheengine is
running, the4WD AUTOindicator lightilluminates.
(See ªFour-Wheel Drive(4WD)º (P.5-22) .)
Four-Wheel Drive(4WD) LOCK in-
dicator light(4WD model)
T32A130827-1 8CDADBD-C5EC-4B57-91E9-14 F0CD3B4D0B
When theignition switchisin the ªONº position, the
Four-Wheel Drive(4WD) LOCK indicator lightillumi-
nates andthen turns off.
When selecting 4WDLOCK mode whiletheengine is
running, the4WD LOCK indicator lightilluminates
simultaneously withthe4WD AUTOindicator light
illuminating. (SeeªFour-Wheel Drive(4WD)º (P.5- 22)
.)
CAUTION:
Do not drive ondry hard surface roadsinthe
LOCK mode.
Front foglights indicator light(if
equipped)
T32A130827-E ED0E205-54BF-444D-8D 2E-20A50BFF 6469
The front foglights indicator lightilluminates whenthe
front foglights areon.(See ªFoglightswitchº (P.2-
45) .)
/
Front passenger airbag status
light (ifequipped)
GUID-766 6AF54-61E 5-4228-BA66 -70889C5030F5
The front passenger airbag status light(
)
located onthe instrument panelwillilluminate whenthe
front passenger airbag isturned offwith thefront
passenger airbag switch. Whenthefront passenger
air bag isturned on,the front passenger airbag status
light (
) will illuminate.
For more details, seeªSupplemental front-impactair
bag systemº (P.1-33) .
Glow plugindicator light(diesel engine
model)
T32A130827- 81D0A3A0-40C5-4FDF-B ED2-8034FF5174D4
When theignition switchisin the ªONº position, the
glow plugindicator lightilluminates andturns offafter
the glow plugs havewarmed up.
If the glow plugs havealready warmed up,the glow
plug indicator flashesbrieflyandthen turns off.
Instrume ntsand controls
2-17
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Alert
GUID-E486 29E9-A0E6-4 E9A-8778-A498C4B794D 4
This setting allowsthecustomer toset alarms.
Select ªAlertº usingthe
switch
*
1
and press
ENTER
*
1
.
Outside Temp. (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toenable/disable the
alert foroutside temperature inthe vehicle information
display .
1. Use the
switch
*
1
to select ªOutside
T emp.º .
2. Press theENTER
*
1
to turn ON/OFF thealert.
Timer:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toset analert tonotify
the driver thatthesettime hasbeen reached.
1. Use the
switch
*
1
to select ªTimerº .
2. Press theENTER
*
1
.
3. To change thetimer amount, usethe
switch
*
1
and theENTER
*
1
to save theselected time
amount.
Navigation (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toenable/disable the
alert fornavigation inthe vehicle information display.
1. Use the
switch
*
1
to select ªNavigationº .
2. Press theENTER
*
1
to turn ON/OFF thealert.
Phone (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toenable/disable the
alert fornavigation inthe vehicle information display.
1. Use the
switch
*
1
to select ªPhoneº .
2. Press theENTER
*
1
to turn ON/OFF thealert. Mail
(ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
This setting allowsthecustomer toenable/disable the
alert fornavigation inthe vehicle information display.
1. Use the
switch
*
1
to select ªMailº.
2. Press theENTER
*
1
to turn ON/OFF thealert.
T yre pressures (ifequipped)
GUID-957 EC358-747F-4 558-9FB7-87BF7FC0C450
The settings inthe ªTyre pressuresº menuareall
related tothe Tyre pressure monitoring systemTPMS
(See ªTirePressure Monitoring System(TPMS)º (P.6-
2) ,ªTire Pressure Monitoring System(TPMS)º (P.5-4)
and ªTire Pressure Monitoring System(TPMS)º (P.8-
36) .).
. Target Front
. Target Rear
. Tyre Pressure Unit
. Calibrate
T arget Front:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The ªTarget Frontº tyrepressure isthe pressure
specified forthe front tyres onthe tyre placard (See,
ªTire Pressure Monitoring System(TPMS)º (P.5-4) and
ªTire placardº (P.9-9) .).
Use the
*
1
and theENTER
*
1
buttons to
select andchange thevalue forthe ªTarget Front/
T arget frontº tyrepressure.
T arget Rear:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The ªTarget Rearº tyrepressure isthe pressure
specified forthe rear tyres onthe tyre placard (see,
ªTire Pressure Monitoring System(TPMS)º (P.5-4) and
ªTire placardº (P.9-9) .).
Use the
*
1
and theENTER
*
1
buttons to
select andchange thevalue forthe ªTarget Rearº tyre
pressure. T
yre Pressure Unit:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The unitfortyre pressure thatdisplays inthe vehicle
information displaycanbechanged to:
. kPa
. psi
. bar
. Kgf/cm2
Use the
*
1
and theENTER
*
1
buttons to
select andchange theunit.
If necessary ,refer tothe following tabletoconvert
between units.
Instrume ntsand controls
2-25
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2-40
Instrument sand controls
position
T32A1308 27-7DA4961D-ADB9-4 8C2-AF3E-CB8FF4FAA66E
The
position turnsonthe headlights inaddition to
the other lights.
AUT Oposition (ifequipped)
T32A1308 27-42005CFF -F09D-4D2E-B51A-E A900BA8AB9 5
When theignition switchisin the ªONº position and
the headlight switchisin the ªAUT Oºposition, the
headlights, frontclearance lights,instrument panel
lights, rearcombination lightsandother lights turnon
automatically dependingonthe brightness ofthe
surroundings.
The headlights willturn onautomatically attwilight orin
rainy weather (whenthewindshield wiperisoperated
continuously) .
When theignition switchisplaced inthe ªLOCKº or
ªOFFº position, thelights willturn offautomatically
.
JVI0510X
CAUTION:
Do not place anyobjects ontop ofthe sensor
*
A
. The sensor senses thebrightness leveland
controls theautolight function.Ifthe sensor is
covered, itreacts asifitis dark, andthe
headlights willilluminate.
Headlight beam
T32A130 827-9CEFEA 7E-F212-4D2D -A4BD-2DF 2318D931E
JVI0856X
T ype A
JVI0994X
T ype B
T o turn onthe high beam, pushthelever towards the
front position
*
1
.
T o turn offthe high beam, returnthelever tothe neutral
position
*
2
.
T o flash theheadlights, pullthelever towards the
rearmost position
*
3
. The headlights canbeflashed
even when theheadlights arenot on.
If equipped, whenthelever ispulled towards the
rearmost position
*
3
after theignition switchis
placed inthe ªOFFº orªLOCKº position, theheadlight
will turn onand stay onfor 30 seconds. Thelever can be
pulled 4times forupto2minutes.
High beam assist (ifequipped)
GUID-A9E4 4EB1-B8C0 -468F-A5B4 -1A9C35090997
The high beam assist system willoperate whenthe
vehicle isdriven atspeeds ofapproximately 40km/h
(25 MPH) andabove. Ifan oncoming vehicleorleading
vehicle appears infront ofyour vehicle whenthe
headlight highbeam ison, the headlight willbe
switched tothe low beam automatically .
Precautions onhigh beam assist:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
WARNING:
. The high beam assist system isaconve-
nience butitis not asubstitute forsafe
driving operation. Thedriver should remain
alert atall times, ensure safedriving prac-
tices andswitch thehigh beam andlow
beam manually whennecessary.
. The high beam orlow beam maynotswitch
automatically underthefollowing condi-
tions. Switch thehigh beam andlowbeam
manually.
Ð During badweather (rain,fog,snow,
wind, etc.).
Ð When alight source similar toahead-
light ortail light isin the vicinity ofthe
vehicle.
Ð When theheadlights ofthe oncoming
vehicle orthe leading vehicleareturned
off, when thecolor ofthe light is
affected duetoforeign materials on
the lights, orwhen thelight beam is
out ofposition.
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
T32A1308 27-1EE98D4 A-158D-4D39-AA9E-F0 F04B3A53A0
WARNING:
In freezing temperatures, thewasher fluidmay
freeze onthe windshield andobscure your
vision. Warmthewindshield withthedefogger
before youwash thewindshield.
CAUTION:
. Donot operate thewasher continuously for
longer than30seconds.
. Donot operate thewasher ifthe window
washer reservoir isempty.
WINDSHIELD WIPERANDWASHER
SWIT CH
T32A1308 27-2B778B4 5-020B-4A03 -9608-5BA1725AAF A9
JVI0953X
T ype A
JVI0865X
T ype B
JVI0977X
T ype C
JVI0863X
T ype D
The windshield wiperandwasher operate whenthe ignition
switchisin the ªONº position.
Wiper operation
T32A1308 27-D1294B0 D-8236-463B-992C-CBCCBDA2 383A
The lever position ªAUT Oº (Type A/Type C)
*
1
operates therain-sensing autowiper system (if
equipped) .(See ªRain-sensing autowiper systemº
(P .2-48) .)
The lever position
ª
º (INT)
*
1
(T ype B/Type D)
operates thewiper intermittently .
. The intermittent operationcanbeadjusted by
turning theadjustment controlknob,(longer)
*
A
or (shorter)
*
B
.
. The speed ofthe intermittent operationvaries
depending onthe vehicle speed.(ifequipped) .
The lever position
*
2
operates thewiper atlow
speed.
The lever position
*
3
operates thewiper athigh
speed.
T o stop thewiper operation, movethelever uptothe
ªOFFº position.
The lever position
*
4
operates thewiper onesweep.
The lever automatically returnstoits original position.
If the windshield wiperoperation isinterrupted
by snow orice, thewiper maystop moving to
protect itsmotor. Ifthis occurs, turnthewiper
switch tothe ªOFFº position andremove the
snow orice onand around thewiper arms.In
approximately 1minute, turntheswitch onagain
to operate thewiper.
Pulling upthe wiper arm:
The wiper armshould beinthe upposition when
replacing thewiper.
T o pull upthe wiper arm,push thelever
*
4
up twice
(within 0.5seconds) whentheignition switchisin the
ªOFFº position within1minute. Thewiper operation
Instrume ntsand controls
2-47
WIPER
ANDWASHER SWITCH
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
2-48
Instrument sand controls
stops inmid-operation.
T o replace thewiper arm,place thewiper arminthe
down position andthen push thelever
*
4
up once.
CAUTION:
. This function canbeoperated evenifthe
ignition switchisin the ªONº position.
However, toprevent anaccident ordamage
when pulling upthe wiper arm,besure to
observe thefollowing precautions.
Ð Make suretheshift lever isin the P
(Park) position (Continuously Variable
T ransmission models).
Ð Make suretheshift lever isin the N
(Neutral) position,withtheparking
brake fullyapplied (Manual Transmis-
sion models) .
Ð Never allowthepassengers tooperate
the windshield wiperswitch inadver-
tently.
. Donot operate thewindshield wiperwhile
the wiper armispulled up.The wiper arm
may bedamaged.
W asher operation
T32A1308 27-21697BA D-DFC6-4CE F-960C-0801925AAFF9
T o operate thewasher, pullthelever toward therear of
the vehicle
*
5
until thedesired amountofwasher fluid
is spread onthe windshield.
The headlight cleaner(ifequipped) willalso operate
with operation ofthe windshield washer.SeeªHead-
light cleanerº (P.2-44) . Wiper
dripwipe system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The wiper willalso operate onceabout 3seconds after
the washer andwiper areoperated. Thisoperation isto
wipe washer fluidthathasdripped onthe windshield.
T o activate ordeactivate thisfunction, seeªSettingsº
(P .2-21) .
RAIN-SENSING AUTOWIPER SYSTEM (if
equipped)
T32A130827- BB2BDD70-8BF2-41F6-9D29-E9D90 CC5CEE6
JVI0866X
T ype A
JVI0997X
T ype B
The rain-sensing autowiper system canautomatically
turn onthe wipers andadjust thewiper speed
depending onthe rainfall andthevehicle speedby
using therain sensor located onthe upper partofthe windshield.
T o set the rain-sensing autowiper system, pushthe
lever down tothe AUT Oposition
*
1
. The wiper will
sweep oncewhile theignition switchisin the ªONº
position.
The rainsensor sensitivity levelcanbeadjusted by
turning theknob toward thefront
*
2
(High) ortoward
the rear
*
3
(Low) .
. High ÐHigh sensitive operation
. Low ÐLow sensitive operation
T o turn therain-sensing autowiper system off,push up
the lever tothe ªOFFº position, orpull down thelever
to the other.
CAUTION:
. Donot touch therain sensor andaround it
when thewiper switch isin the AUTO
position andtheignition switchisin the
ªONº position. Thewipers mayoperate
unexpectedly andcause toan injury ora
wiper damage.
. When thewindshield glassiscoated with
water repellent, thespeed ofthe rain-sen-
sing auto wipers maybehigher eventhough
the amount ofthe rainfall issmall.
. Besure toturn offthe rain-sensing auto
wiper system whenyouuseacar wash.
. The rain-sensing autowipers maynotoper-
ate ifrain does nothitthe rain sensor evenif
it is raining.
. Using genuine wiperblades isrecom-
mended forproper operation ofthe rain-
sensing autowiper system. (SeeªWiper
bladesº (P.8-18) forwiper blade replace-
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
ment.)
REAR WINDOW WIPERANDWASHER
SWIT CH
T32A1308 27-4C617F 31-4B30-425D-87B8-DF9083199 118
JVI0867X
T ype A
JVI0869X
T ype B
The rear window wiperandwasher operates whenthe
ignition switchisin the ªONº position.
Wiper operation
T32A130 827-B8D8 9237-EB4C-4 3BA-832C-691E9613E0F4
The switch position
*
1
operates thewiper intermit-
tently .
The switch position
*
2
operates thewiper atlow
speed.
If the rear window wiperoperation isinterrupted
by snow orice, thewiper maystop moving to
protect itsmotor. Ifthis occurs, turnthewiper
switch tothe ªOFFº position andremove the
snow orice onand around thewiper arms.In
approximately 1minute, turntheswitch onagain
to operate thewiper.
Reverse synchronization function:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
When thewindshield wiperswitch ison, moving the
shift lever tothe ªRº (Reverse) positionwilloperate the
rear window wiper.
T o activate ordeactivate thisfunction, seeªSettingsº
(P .2-21) .
W asher operation
T32A1308 27-76F30BB F-65C7-4181-A6A7-B 95992B8E67 9
T o operate thewasher, pushthelever toward thefront
of the vehicle
*
3
until thedesired amountofwasher
fluid isspread onthe windshield. Thewiper will
automatically operateseveraltimes.
T32A1308 27-153D99 46-AD51-4545-B9EB-1 00B3DBFEAE 2
JVI0852X
T ype A (Example)
JVI0853X
T ype B
JVI1009X
T ype C
The defogger switchoperates whentheignition switch
is in the ªONº position.
Instrume ntsand controls
2-49
DEFOGGER
SWITCH
&RQGLWLRQ
([FHSWIRU&KLQD