2016 MITSUBISHI iMiEV radio

AM/FM electronically tuned radio with CD player (if so equipped) 7-14 Comfort controls
7
N00735000913
1. Press the POWER button until it beeps to turn the audio system ON and OFF. The system turns on in the last mode used.Press the RADIO button to turn ON the radio. 2. Press the RADIO button to select thedesired band (AM/FM1/FM2). 3. Press the SEEK button
to tune to a station,
or press the MEMORY button either or to tune in to a station memorized. Refer to “Automatic tuning”, “Manual tuning” or “To enter frequencies into the memory”.
After pressing the SEEK button, a receivable station will be automatically selected andreception of the st
ation will begin.
Press the SCAN button.
The radio will tune
consecutively to each
available station for
about 5 seconds per stat
ion. If you want to
stop scanning, press the SCAN button again. The frequency display of the current stationflashes once per second during SCAN.
The frequency changes every time the SEEK button is pressed. Press the button to sele
ct the desired station.
As many as 6 AM and 12 FM stations can be entered into the memory. To store a frequency in the memory, follow these steps: 1. Press the SEEK button to tune to the fre- quency you wish to keep in the memory. 2. Press the MEMORY button either or
until it beeps. The sound will be momentarily inter-rupted while the frequency is being entered into the memory.
3. To recall a frequency that has been saved in memory, press the MEMORY buttonbriefly for no longer than about 1 second.
To listen to the radio

Automatic tuning

SCAN function
Manual tuning

To enter frequencies into the mem- ory

NOTE
 Disconnecting the 12V st
arter battery cables
erases all the radio stat
ion settings stored in
the memory.
BK0220401US.book 14 ページ ２０１５年６月３日　水曜日　午前７時４２分

AM/FM electronically tuned radio with CD player (if so equipped)
Comfort controls 7-15
7
N00735300743
N00735502097
1. Press the POWER button until it beeps to turn the audio system ON and OFF. The system turns on in the last mode used. 2. Insert the disc with the label facing up.When a disc is inserted, the CD indicator will come on and the CD player will begin playing even if the radio is being used.The CD player will also begin playing when the CD button is pressed with a disc set in the CD player or in the disc loadingslot, even if the radio is being used.
When the eject button is pressed, the disc automatically stops and
is ejected. The sys-
tem automatically swit
ches to radio mode.
CD control panel and display

1- Disc loading slot 2- Eject button3- CD (CD mode changeover) button 4-
TRACK (Fast-forward/Track up)
5-
TRACK (Fast-reverse/Track down) button
6- CD indicator 7- SEL (Select m
ode) indicator
8- FOLDER indicator9- TRACK indicator 10- Display 11- RDM/F-RDM indicator12- RPT/F-RPT indicator 13- SELECT knob 14- POWER (On-Off) button/PAGE (Title
scroll) button
15- DISP (Title display) button 16- MENU button
17- SCAN button 18-
SEEK (Up-seek) button/ (Return) button
19-
SEEK (Down-seek) button/ (Select) button
To listen to a CD

To s e t a d i s c

NOTE
 For information concerning the adjustment of volume and tone, refer to “To adjust the volume” on page 7-12 and “To adjust the tone” on page 7-12.  3 inches (8 cm) compact disc cannot be played on this CD player.
 For information concerning the handing of the compact discs, re
fer to “Handling of
compact discs” on page 7-25.
To eject a disc

NOTE
 If you do not remove an
ejected disc before
15 seconds have elapse
d, the disc will be
reloaded.
To listen to a music CD

NOTE
BK0220401US.book 15 ページ ２０１５年６月３日　水曜日　午前７時４２分

AM/FM electronically tuned radio with CD player (if so equipped) 7-16 Comfort controls
7
Push the CD button if a disc is already in the CD player. The audio system will enter CDmode and start playba
ck. The track number
and the playing time will appear on the dis- play. The tracks in the disc will be playedconsecutively and continuously. This CD player allows you to play MP3 (MPEG Audio Layer-3) files recorded on CD-ROMs, CD-Rs (reco
rdable CDs), and
CD-RWs (rewritable CDs) in ISO9660 Level 1/Level 2, Joliet, a
nd Romeo formats. Each
disc may have a maximum of 16 trees, 100folders and 255 files. During MP3 playback, the unit can display ID3 tag information. For information concerning ID
3 tag, refer to “CD
text and MP3 title di
splay” on page 7-19.
Push the CD button if a disc is already in the CD player.The display shows “READING”, then play- back begins. The folder number, the track number and the playing time will appear onthe display.
To listen to an MP3 CD

NOTE
 While listening to a
disc on which CD-DA
(CD-Digital Audio) a
nd MP3 files have both
been recorded, you can switch between read- ing of the CD-DA, reading of the MP3 files, and the external audio input mode by press-ing the CD button for 2 seconds or longer (until you hear a beep).  With a disc that contains both CD-DA and MP3 files, the CD-DA files are automati- cally played first.  The playback sound quality differs depend- ing on the encoding software and the bit rate.For details, refer to
the user manual of your
encoding software.  Depending on file/folde
r configurations on a
disc, it may take some
time before playback
starts.  MP3 encode software and writing software are not supplied with this unit.  You may encounter trouble in playing an MP3 or displaying the information of MP3files recorded with certain writing software or CD recorders (CD-R/RW drivers).  If you record too many folders or files other than MP3 onto a disc, it
may take some time
before playback starts.
 This unit does not record MP3 files.  For information concerning CD-Rs/RWs, refer to “Notes on CD-Rs/RWs” on page 7-26.CAUTION Attempting to play a file not in the MP3 for- mat which has the “.mp3” file name may produce noise from the speakers and speakerdamage, and can da
mage your hearing.
NOTE
BK0220401US.book 16 ページ ２０１５年６月３日　水曜日　午前７時４２分

AM/FM electronically tuned radio with CD player (if so equipped)
Comfort controls 7-17
7
To fast forward or fast reverse the disc, press the TRACK button or the TRACK but- ton.
You can fast-forward the disc by pressing the TRACK button. While the button is kept pressed, the disc wi
ll be fast-forwarded.
You can fast reverse th
e disc by pressing the
TRACK button. While the button is kept pressed, the disc wi
ll be fast-reversed.
You can select your desi
red track by using the
TRACK button. Press the TRACK button repeatedly until the desired track number appears on the dis-play. When listening to a MP3 CD, keep pressing the button to continue to move up tracks. Press the TRACK button repeatedly until the desired track number appears on the dis-play. When listening to a MP3 CD, keep pressing the button to continue to move down tracks.
Operate the following buttons or the SELECT knob to select desired file.When this mode is activated by pressing the
button, the SEL indicator will be dis-
played in the display.
Folder selection ord
er/MP3 file playback
order (Example) Folder selection In the order File selection In the orderTo fast forward/reverse the disc

Root folder (Root directory)
Tree 1 Tree 2 Tree 3 Tree 4
Fast forward Fast reverseTo select a desired track

Track up Track down
NOTE
 Pressing the TRACK button once during the song will cause the
CD player to restart
playback from the beginning of the song.
To find a file (MP3 CDs only)

button
:Press the button to start this mode or cancel the selection.
SELECT knob :Turn the knob to show the
folder or file.
button
:Press the button to select the folder or file.
NOTE
 If no operation is performed for 10 seconds or more or other button is operated after theSELECT knob has been turned, searching ofthe desired file is canceled.  If no operation is perf
ormed for 5 seconds or
more after the file is displayed, playback starts.
BK0220401US.book 17 ページ ２０１５年６月３日　水曜日　午前７時４２分

AM/FM electronically tuned radio with CD player (if so equipped) 7-18 Comfort controls
7
N00771500013
1. Press the MENU button until beeps. 2. Press the SEEK / button repeatedly to select the mode. 3. Press the MENU button until you hear a beep. The selected mode will operate.
N00771600014
Select the ALL REPEAT mode. Refer to “Toselect the playing
mode” on page 7-18.
The all tracks on the
disc will be played
repeatedly. Select the REPEAT mode. Refer to “To select the playing mode” on page 7-18. The RPT indicator will come on and repeatthe same track. Select the F-REPEAT mode. Refer to “To select the playing
mode” on page 7-18.
The F-RPT indicator will come on and the all track on the currently selected folder will be played repeatedly.
N00771800016
Select the RANDOM m
ode. Refer to “To
select the playing mode” on page 7-18. The RDM indicator will come on and thetracks on the disc will be played in a random sequence. Select the F-RANDOM mode. Refer to “To select the playing mode” on page 7-18. The F-RDM indicator will come on and thetracks on the currently selected folder will be played in a random sequence. Select the RANDOM m
ode. Refer to “To
select the playing mode” on page 7-18. The RDM indicator will come on and the files from all the folders on the disc will beplayback in a random sequence.
 When the SEL indicato
r is not shown on the
display and the SELECT knob is operated,the volume adjustment is effective.
To select the playing mode

NOTE(MP3 CDs only)

Repeat an all track (normal playback) Repeat a track Repeat tracks in th
e same folder (MP3
CDs only)
NOTE
 With a disc that contains both CD-DA and MP3 files, the repeat
mode causes only files
of the same format (CD-DA only or MP3files only) to be repeated.
To play tracks in random order

Random playback for a disc (music CDs only) Random playback for a folder (MP3 CDs only) Random playback for all folders on a disc (MP3 CDs only)
BK0220401US.book 18 ページ ２０１５年６月３日　水曜日　午前７時４２分

AM/FM electronically tuned radio with CD player (if so equipped)
Comfort controls 7-19
7
N00771900017
Press the SCAN button.
“SCAN” will appear
on the display and the CD player will playback the first 10 second
s of each track on the
selected disc (music
CDs only) or the cur-
rently selected folder (MP3 CDs only).The track number will blink while the scan mode is selected. To stop the scan mode, press the SCAN button again.
N00752100166
This audio system can
display CD text and
MP3 titles including ID3 tag information. The audio system can di
splay disc and track
titles for discs with converted disc and track title information. Press the DISP button repeatedly to make selections in the following sequence: disc name
 track name
 normal
display mode. The audio system can display folder and track titles for discs wi
th converted folder and track
information. Press the DISP button repeat- edly to make selections in the followingsequence: folder name
 track name
 nor-
mal display mode.
The audio system can
display ID3 tag infor-
mation for files that ha
ve been recorded with
ID3 tag information. 1. Press the DISP button for 2 seconds or longer to switch to the ID3 tag informa- tion. “TAG” will appear on the display.2. Press the DISP button repeatedly to make selections in th
e following sequence:
album name
 track name
 artist name
 normal display mode.
NOTE
With a disc that contains both CD-DA and MP3 files, the random
mode causes only
files of the same format (CD-DA only orMP3 files only) to be repeated.
To find the start of each track on a disc for playback

NOTE
 Once all tracks on the
disc (music CDs only)
or the currently selected folder (MP3 CDs only) have been scanne
d, playback of the
disc will restart from
the beginning of the
track that was play
ing when scanning
started.  With a disc that contains both CD-DA and MP3 files, the scan m
ode causes only files of
the same format (CD-DA only or MP3 filesonly) to be played.
CD text and MP3 title display

CD text
NOTE
 The display can show up to 11 characters. If a disc name or track
name has more than 11
characters, press the PAGE button to viewthe next 11 characters.  When there is no title information to be dis- played, the display shows “NO TITLE”.  Characters that the a
udio system cannot dis-
play are shown as “ ”.
ID3 tag information
NOTE
 To return from ID3 tag information to the folder name, press the DISP button again for2 seconds or longer.  When there is no title information to be dis- played, the display
shows “NO TITLE”.
a folder name, track name
, or item of ID3 tag
information has more than 11 characters, press the PAGE button to view the next 11characters.  Folder names, trac
k names and ID3 tag
information can each be displayed up to a length of 32 characters.  Characters that the a
udio system cannot dis-
play are shown as “ ”.
BK0220401US.book 19 ページ ２０１５年６月３日　水曜日　午前７時４２分

Steering wheel audio remote control switch (if so equipped)
Comfort controls 7-23
7
It can be used when the electric motor switch is in the “ON” or “ACC” position. Press the power switch to turn on the power. When the power is turned on, the last mode
used before turning off is displayed. To turn off the power, press and hold down the powerswitch for about 2 seconds until you hear a beep. While the button is pressed, the volume will continue to increase. While the button is pressed, the volume will continue to decrease. Press the mode selector button to select the desired mode.The mode changes in the following order. AM
 FM1
 FM2
 CD
 USB or iPod
*
 Bluetooth
®*  AM
* : If you connect these devices.
Press the mode selector button and select AM or FM mode. After pressing one of
these buttons, a receiv-
able station will be automatically selected and reception of the st
ation will begin.
Press the mode selector
button and select CD
mode. To fast forward or fast
reverse the disc, press
the fast-forward button or the fast-reverse button. You can fast forward the disc by holding down the fast-forward button. While the but-
1- Volume up button 2- Volume down button 3- Power switch/Mode selector button4- Seek up/Track up/File up/Fast-forward
button
5- Seek down/Track down/File
down/Fast-reverse buttonNOTE
 Do not press multiple buttons at the same time when using the steering wheel audioremote control switch.
To turn on the power

Vo l u m e c o n t r o l

Volume up button

Volume down button

Mode selection

To listen to the radio

Automatic tuning

Seek up button/Seek down buttonTo listen to a CD

To fast forward/reverse the disc (music CDs only)

Fast forward
BK0220401US.book 23 ページ ２０１５年６月３日　水曜日　午前７時４２分

Handling of compact discs Comfort controls 7-25
7
N00734100340
 Use only the type of compact discs that have the mark shown in the illustration below. (Playback of CD-R or CD-RW discs may cause problems.)
 The use of special shaped, damaged com- pact discs (like cracked discs) or low- quality compact discs (like warped discsor burrs on the discs)
such as those shown
will damage the CD player.
Error display
Problem
Item
Repair
NO DISC No disc inserted Disc is
not in CD player. Insert disc.
CHECK DISC Focus error
Disc is not loaded correctly, or condensation on disc.
Insert disc with label facing up. Remove moisture from disc.
DISC ERROR Disc error
Disc is dirty, scratched,
or deformed; or exces-
sive vehicle vibration.
Clean or replace disc.
Retry when vibrations
stop.
INTERNAL E Mechanism error
Loading or eject error. Pick-up is out of posi- tion.
Eject disc and reload. If di
sc will not eject, bring
your vehicle to a certified i-MiEV dealer.
HEAT ERROR
Inside of audio system is hot.
Internal protection agai
nst high temperatures.
Allow radio to cool
by waiting about 30 min-
utes.
ERROR DC DC offset output voltage Foreign materi
al is inside of radio or amplifier. Bri
ng your vehicle to a certified i-MiEV deale
r.
ERROR
Communication or power supply error
Communication error betw
een external device
and equipment. Power supply error of external device.
Bring your vehicle to a certified i-MiEV dealer.
Handling of compact discs
BK0220401US.book 25 ページ ２０１５年６月３日　水曜日　午前７時４２分