you then switch on th e correspondin g tur n sig-
nal to chang e lane, you will also receiv e an opti-
cal and audibl e warning. If a ris k of lateral colli-
sion is detected, corrective brakin g may help
you avoid a collision . Befor e a course-correcting
brak e application , Active Blind Spot Assis t eval -
uates th e spac e in th e direction of travel and at
th e side s of th e vehicle. Fo r this, Active Blind
Spot Assis t uses th e forward-facing rada r sen -
sors.
Active Blind Spot Assis t support s you from a
speed of approximately 20 mph (30 km/h).
Important safety notes Active Blind Spot Assis t is only an aid and is no t
a substitut e for attentive driving.
G WARNIN G
Active Blind Spot Assis t does no t reac t to :R
vehicles overtake n to o closely on th e side ,
placin g them in th e blin d spo t areaR
vehicles whic h approac h wit h a larg e speed
differential and overtake your vehicl e
As a result , Active Blind Spot Assis t may nei-
ther giv e warnings no r interven e in suc h sit -
uations. There is a ris k of an accident.
Always observ e th e traffic condition s care-
fully, and maintai n a saf e lateral distance.
i US A only: This device has been approve d by
th e FCC as a "Vehicular Radar System". The
rada r sensor is intended for use in an auto-
motive rada r system only. Removal, tamper -
ing, or altering of th e device will voi d any war-
ranties, and is no t permitte d by th e FCC. Do
no t tamper with, alter, or use in any non-
approve d way.
An y unauthorize d modification to this device
could voi d th e user's authorit y to operate th e
equipment.
i Canada only: This device complies wit h
RSS-210 of Industry Canada. Operation is
subjec t to th e followin g tw o conditions:
1. This device may no t caus e harmful inter-
ference , and
2. This device mus t accept any interferenc e
received, includin g interferenc e that may
caus e undesir ed o peration of th e d
evice .
Removal, tampering, or altering of th e device
will voi d any warranties, and is no t permitted. Do no t tamper with, alter, or use in any non-
approve d way.
An y unauthorize d modification to this device
could voi d th e user's authorit y to operate th e
equipment.
Rada r sensor sThe Active Blind Spot Assis t rada r sensor s are
integrate d into th e fron t and rear bumpers and
behind a cover in th e radiato r trim. Mak e sur e
that th e bumpers and th e cover in th e radiato r
grill are free of dirt, ice or slush. The rear sensor s
mus t no t be covered, e.g. by bicycle racks or
overhangin g loads . Following a severe impact or
in th e event of damage to th e bumpers , hav e th e
function of th e rada r sensor s checke d at a quali-
fie d specialist workshop . Active Blind Spot
Assis t may otherwise no longer wor k properly.
Monitoring area
G WARNIN G
Active Blind Spot Assis t does no t detec t all
traffic situation s and roa d users. There is a
ris k of an accident.
Always mak e sur e that there is sufficien t dis-
tance on th e side for other traffic or obstacles.
Active Blind Spot Assis t monitors th e area up to
10 ft (3. 0 m) behind your vehicl e and directl y
next to your vehicle, as shown in th e diagram.220
Driving systems
Driving and parking