2016 MAZDA MODEL MX-5 language

5–89
Interior Features
Bluetooth®
Confirmation Prompts
The confirmation prompt confirms the
command content to the user before
advancing to the operation requested by
the user. When this function is turned
on, the system reads out the voice
input command previously received
and confirms whether the command is
correct before advancing to the command
execution.
When the confirmation prompt function is
turned on:
(Ex. “Calling John's device. Is this
correct?”)
When the confirmation prompt function is
turned off:
(Ex. “Calling John's device.”)
NOTE
If the confirmation prompt function is
turned off when making an emergency
call, the system reads out and confirms the
command before executing it.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Setup”
3. Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
4. Say: [Beep] “Confirmation prompts”
5. Prompt: “Confirmation prompts
are on/off. Would you like to turn
confirmation prompts off/on?”
6. Say: [Beep] “Yes”
7. Prompt: “Confirmation prompts are
off/on.”
Voice Recognition Learning
Function (Speaker Enrollment)
(Type A)
The voice recognition learning function
enables voice recognition appropriate to
the characteristics of the user's voice. If the
recognition of the voice input commands
to the system is not adequate, this function
can largely improve the system's voice
recognition of the user. If your voice can
be recognized sufficiently without using
this function, you may not realize the
added benefit of the function. To register
your voice, the voice input command
list must be read out. Read out the list
when the vehicle is parked. Perform the
registration in as quiet a place as possible
(Page 5-87). The registration must be
performed completely. The required time
is a few minutes. The user needs to be
seated in the driver's seat with the voice
input command list for voice recognition
learning open to the page indicated below.
When voice recognition learning is done
for the first time
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Voice training”
3. Prompt: “This operation must be
performed in a quiet environment while
the vehicle is stopped. See the owner's
manual for the list of required training
phrases. Press and release the talk
button when you are ready to begin.
Press the hang-up button to cancel at
any time.”
4. Press the talk button with a short press.
5. The voice guidance reads out the voice
input command number (refer to the
voice input command list for voice
recognition learning). (Ex. “Please read
phrase 1”)
MX-5_8EU4-EA-15D_Edition1.indb 892015/03/10 9:55:46

5–93
Interior Features
Bluetooth®
7. Select .
Deleting all devices
1. Select the icon on the home screen
to display the Settings screen.
2. Select the tab.
3. Select .
4. Select .
5. Select .
6. Select .
Changing PIN code
PIN code (4 digits) can be changed.
1. Select the icon on the home screen
to display the Settings screen.
2. Select the tab.
3. Select .
4. Select .
5. Select .
6. Input the new PIN code to be set.
7. Select .
Available Language (Type B)
The Bluetooth® Hands-Free System
applies to the following languages:
 English Spanish French
Refer to Settings on page 5-53.
Voice Recognition (Type B)
In this section, the basic operation of the
voice recognition is explained.
Activating Voice Recognition
Press the talk button.
Ending Voice Recognition
Use one of the following methods:
 Press the hang-up button. Say, “Cancel”. Operate the commander switch or the
center display (only when vehicle is
stopped).
Skipping Voice Guidance (for faster
operation)
Press and release the talk button.
Troubleshooting for Voice Recognition
If you do not understand an operation
method while in the voice recognition
mode, say “Tutorial” or “Help”.
Commands useable anytime during
voice recognition
“Go Back” and “Cancel” are commands
which can be used at anytime during voice
recognition.
Returning to previous operation
To return to the previous operation, say,
“Go Back” while in voice recognition
mode.
Cancel
To put the Bluetooth® Hands-Free system
in standby mode, say, “Cancel” while in
voice recognition mode.
MX-5_8EU4-EA-15D_Edition1.indb 932015/03/10 9:55:48

5–110
Interior Features
Bluetooth®
Example of use (verify unread E-mail)
1. Select the icon on the home screen
to display the Communication screen.
2. Select to display the inbox.

3. Select the unread message displayed in
bold.
4. The details of the message are
displayed and replying to the message,
making a call, or playback can be
performed.
Changing account for displaying
(E-mail only)
1. Select .
2. Select the account which you would
like to display. Only the messages for
the selected account are displayed in
the inbox.
Editing preset messages
1. Select the icon on the home screen
to display the Communication screen.
2. Select .
3. Select .
4. Select the preset message which you
would like to edit. The keyboard screen
is displayed.
5. When the message is input and is
selected, the message is stored as a
preset message.
NOTE
 Select the icon to change the
language.
 Select the icon to switch between
capitalized and lower-case characters.
 Select the icon to return to the
previous screen without storing the edit.
MX-5_8EU4-EA-15D_Edition1.indb 1102015/03/10 9:55:54

5–130
Interior Features
Bluetooth®
Regarding problems with calls
SymptomCauseSolution method
When starting a call, vehicle noise from the other party can be heard
For about three seconds after starting a call, the Bluetooth® unit's Noise Suppression function requires time to adapt to the call environment.
This does not indicate a problem with the device.
The other party cannot be heard or the speaker's voice is quietThe volume is set at zero or low.Increase the volume.
Other problems
SymptomCauseSolution method
The indication for the remaining battery is different between the vehicle and the device
The indication method is different between the vehicle and the device.—
When a call is made from the vehicle, the telephone number is updated in the incoming/outgoing call record but the name does not appear
The number has not been registered into the phonebook.
If the number has been registered into the phonebook, the incoming/outgoing call record is updated by the name in the phonebook when the engine is restarted.
The cell phone does not synchronize with the vehicle regarding the incoming/outgoing call record
Some types of cell phones do not synchronize automatically.Operate the cell phone for synchronization.
It takes a long time to complete the function for changing the languageA maximum of 60 seconds is required.—
MX-5_8EU4-EA-15D_Edition1.indb 1302015/03/10 9:55:59

9–11
Specifications
Personalization Features
ItemFeatureFactory SettingAvailable Settings
Settings Change Method
Auto headlight off*3 (page 4-35).Time until headlights turn off30 seconds
120 seconds/90 seconds/60 seconds/30 seconds/Off*4
A—
Auto-light control (page 4-35).Timing by which lights turn onMedium
High/Med. High/Medium/Med. Low/Low
A—
High Beam Control System (HBC) (page 4-66).Operational/non-operational*5OnOn/OffA—
Adaptive Front Lighting System (AFS) (page 4-65).Operational/non-operational*5OnOn/OffA—
Lights-on reminder*6 (page 7-45).Warning beep volumeOffHigh/Low/OffA—
Coming home light system (page 4-38).Time until headlights turn off30 seconds
120 seconds/90 seconds/60 seconds/30 seconds/Off
A—
Leaving home light system (page 4-39).Operational/non-operationalOnOn/OffA—
Turn indicator (page 4-40).Beep volumeLowHigh/LowA—
Three-flash turn signal (page 4-40).Operational/non-operationalOnOn/OffA—
System
LanguageLanguage indicated in displayEnglishDepends on market*7A—
TemperatureTemperature unit indicated in display°F or °C°F/°CAF
DistanceDistance unit indicated in displaymi or kmmi/kmA—
Fuel Economy Monitor (page 4-59).
Ending displayOn/offOffOn/OffB—
Fuel economy resetting procedureLinkage/non-linkage with fuel economy reset and trip meter resetOffOn/OffB—
*1 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The volume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.*2 If the auto-wiper control is set to Off, the wiper lever position is set to intermittent operation.
MX-5_8EU4-EA-15D_Edition1.indb 112015/03/10 9:56:46