2016 MAZDA MODEL CX-3 instrument cluster

When Driving
5
Starting the Engine
For details, refer to Section 4, “Start/Stop Engine”.
1. Make sure the parking brake is on.
2. Continue to press the brake pedal firmly
until the engine has completely started.
3. (Manual transaxle)
Continue to press the clutch pedal firmly
until the engine has completely started.
(Automatic transaxle)
Put the vehicle in park (P). If you must
restart the engine while the vehicle is
moving, shift into neutral (N).
4. Press the push button start after both the KEY indicator
light (green) in the instrument cluster and the push button
start indicator light (green) illuminate.
(SKYACTIV-D 1.5)
• The starter does not rotate until the glow indicator light turns off.
• When starting the engine, do not release the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) until the glow indicator light in the
instrument cluster turns off and the engine starts, after pressing the push button
start.
• If the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) is
released before the engine starts, depress the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) again and press the push button start to
start the engine.
• If the ignition is left switched ON for a long period of time without the engine
running after the glow plugs are warmed up, the glow plugs may warm up again
which will illuminate the glow indicator light.
Indicator light
Push button start
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD

7
When Driving
For details, refer to Section 4, “Start/Stop Engine”.
i-stop OFF Switch
By pressing the switch until a beep sounds,
the i-stop function is turned off and the i-stop
warning light (amber) in the instrument
cluster turns on. By pressing the switch again
until the beep sounds, the i-stop function
becomes operational and the i-stop warning
light (amber) turns off.
Automatic transaxle
2. The engine restarts automatically when the brake pedal is released with the
selector lever in the D or M position (not in second gear fixed mode).
3. If the selector lever is in the N or P position, the engine does not restart when
the brake pedal is released. The engine restarts when the brake pedal is
depressed again or the selector lever is shifted to the D, M (not in second gear
fixed mode) or the R position. (For the purposes of safety, always keep the
brake pedal depressed when shifting the selector lever while engine idling is
stopped.) 1. Engine idling stops when the brake pedal is depressed while the vehicle is
driven (except for driving in the R or M position second gear fixed mode) and
the vehicle is stopped.
Operation of i-stop Function
i-stop indicator light (green)/i-stop warning light (amber)
i-stop indicator light (green)
• When the engine idling is stopped.
Engine idling stop conditions are met while the vehicle
is being driven.
• The light turns on when the ignition is switched ON and
turns off when the engine is started. i-stop warning light (amber)
• The light turns on when the i-stop OFF switch is
pressed and the system is turned off. • (Except European model)
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD

When Driving
8
Active Driving Display
Always adjust the display brightness and position with the vehicle stopped:
Adjusting the display brightness and position while driving the vehicle is dangerous
as doing so could distract your attention from the road ahead and lead to an
accident.
WARNING
For details, refer to Section 4, “Start/Stop Engine” or “Instrument Cluster and Display”.
i-stop Warning Beep
If the driver's door is opened while engine idling is stopped, the warning sound
operates to notify the driver that engine idling is stopped. It stops when the driver's
door is closed.
Active driving display
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD

When Driving
9For details, refer to Section 4, “Instrument Cluster and Display”.
Some of the warning/indicator lights are displayed in the instrument cluster.
If a warning/indicator light is displayed in the instrument cluster, verify the
meaning of the warning in the Warning (Display Indication) item.
Warning/Indicator Lights
Signal Warning/Indicator Lights
1
2
3
4
5
6
7
8
9ABS Warning Light Master Warning Light
Charging System Warning Light
Engine Oil Warning Light
Check Engine Light
High Engine Coolant Temperature
Warning Light (Red)/ Low Engine Coolant
Temperature Indicator Light (Blue)
i-stop Warning Light (Amber) /
Indicator Light (Green)
Automatic Transaxle Warning Light
10
Power Steering Malfunction Indicator Light
19
2124
26
27High Beam Control System (HBC)
Warning Light (Amber) /Indicator
Light (Green) Signal Warning/Indicator Lights
Brake System Warning Light
20KEY Warning Light (Red) /Indicator
Light (Green)
Lane Departure Warning System
(LDWS) Warning Light Smart Brake Support/Smart City
Brake Support (SBS/SCBS) Warning
Light (Amber)/Indicator Light (Red)23
Blind Spot Monitoring (BSM)
OFF Indicator Light LED Headlight Warning Light
Lane Departure Warning System
(LDWS) OFF Indicator Light
17
11
12
13Air Bag/Seat Belt Pretensioner
System Warning Light
Low Fuel Warning Light
15Seat Belt Warning Light (Front seat)
Door-Ajar Warning Light
Seat Belt Warning Light (Red) /
Indicator Light (Green) (Rear seat)
14
Low Washer Fluid Level Warning Light18
Tyre Pressure Monitoring System
Warning Light
Glow Indicator Light28
34
35
36
37Smart Brake Support/Smart City
Brake Support (SBS/SCBS) OFF
Indicator Light
i-ELOOP Warning Light
(Amber)/Indicator Light (Green)
Shift Position Indication
38
39
41
42
Headlight High-Beam Indicator Light
Direction Indicator/Hazard Warning
Indicator Lights
Security Indicator Light
Cruise Main Indicator Light (Amber) /
Cruise Set Indicator Light (Green)
Front Fog Light Indicator Light
Wrench Indicator Light30
31
32
33TCS/DSC Indicator Light
TCS OFF Indicator Light
Lights-On Indicator Light
43
Select Mode Indicator Light
Diesel Particulate Filter Indicator Light29
Adjustable Speed Limiter Main Indicator
Light(Amber)/ Adjustable Speed Limiter
Set Indicator Light (Green)
44 40Rear Fog Light Indicator Light
120 km/h Warning Light
16
4WD Warning Light
22
25Mazda Radar Cruise Control (MRCC)
Warning Light (Amber)/Indicator
Light (Green)
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD

When Driving
10
Lock-release
button
Automatic Transaxle Controls
Various Lockouts:
Indicates that you must depress
the brake pedal and hold in the
lock-release button to shift (The
ignition must be switched ON).
Indicates the selector lever can be
shifted freely into any position.
Indicates that you must hold in
the lock-release button to shift.
Drive Selection Switch
Drive Selection
Drive selection is a system to switch the vehicle's drive mode. When the sport mode
is selected, vehicle's response against accelerator operation is enhanced. Use the
sport mode when higher vehicle response is required such as merging onto
expressway or accelerating to overtake.
2. Pull the drive selection switch back (“ ”) to cancel the sport mode. 1. Press the drive selection switch forward (“ ”) to select the sport mode.
Select Mode Indicator Light
When the sport mode is selected, the select mode
indicator light turns on in the instrument cluster.
For details, refer to Section 4, “Transaxle”.
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD

When Driving
15For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
Setting the Mazda Radar Cruise Control (MRCC)
How to Set the Speed When the ON switch is pressed, the vehicle speed and the distance between
vehicles while in headway control can be set. The Mazda Radar Cruise Control
(MRCC) indication is shown in the display of the instrument cluster.
1. Adjust the vehicle speed to the desired setting using the accelerator pedal.
2. Headway control begins when the SET + or SET - switch is pressed. The set
speed and the inter-vehicle distance display filled with white lines are displayed.
Travel statusDuring travel at constant
speedDuring travel under headway
control
Display
ON/OFF switch
OFF switch ON switch
CANCEL switch CANCEL switch
Switch Switch
Switch Switch
Without Adjustable Speed LimiterWith Adjustable Speed Limiter
SET+/SET- switch SET+/SET- switchRESUME
switch RESUME
switch
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD

18
When Driving
Smart Brake Support (SBS)
Smart Brake Support (SBS) is a system which alerts the driver of a possible
collision using an indicator and warning sound in the instrument cluster while the
vehicle is being driven at about 15 km/h or faster (10 mph or faster) and the
system's radar sensor (front) determines that your vehicle may hit a vehicle
ahead. Furthermore, if the radar sensor (front) determines that a collision is
unavoidable, the automatic brake control is performed to reduce damage in the
event of a collision.
For details, refer to Section 4, “Smart Brake Support (SBS)”.
Do not rely completely on the Smart Brake Support (SBS) system and always
drive carefully:
The Smart Brake Support (SBS) system is only designed to reduce damage in the
event of a collision. The ability to detect obstructions is limited depending on the
obstruction, weather conditions, or traffic conditions.
Check the safety of the surroundings and pay sufficient attention to the
distance between your vehicle and the vehicles travelling in front and behind.
WARNING
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD

22
When Driving
Diesel Particulate Filter
The diesel particulate filter collects and eliminates most of the particulate matter
(PM) in the exhaust gas of the diesel engine for improved exhaust gas processing
ability.
While the particulate matter (PM) collected in the diesel particulate filter is
eliminated automatically, fuel may be mixed with the engine oil increasing the
engine oil level. If the engine oil level exceeds the “X” mark on the dipstick,
replace the engine oil.
For details, refer to Section 4, “Tyre Pressure Monitoring System” or
“Diesel Particulate Filter”.
The Tyre Pressure Monitoring System (TPMS) monitors the air pressure of all
four tyres. If the air pressure of one or more tyres is too low, the system warns the
driver by indicating the tyre pressure monitoring system warning light in the
instrument cluster and operating a beep sound.
In the following cases, system initialization must be performed so that the system
operates normally.
• A tyre pressure is adjusted.
• Tyre rotation is performed.
• A tyre or wheel is replaced.
• The tyre pressure monitoring system warning
light is illuminated.
Tyre Pressure Monitoring System
%:A((''%A'FKVKQPA3WKEM)WKFGKPFD