2016 MAZDA MODEL 6 ignition

3
Before Driving
Mirror switch
Centre position
Outside Mirrors
1. Rotate the mirror switch to the left (L) or
right (R) to choose the left or right side
mirror.
2. Press the mirror switch in the appropriate
direction.
ON/OFF button
Indicator light
Rearview Mirror
Auto-dimming mirror
The auto-dimming mirror automatically reduces
glare of headlights from cars at the rear when the
ignition is switched ON.
Press the ON/OFF button to cancel the automatic
dimming function. The indicator light will turn off.
To reactivate the automatic dimming function, press the
ON/OFF button. The indicator light will illuminate.
For details, refer to Section 3, “Mirrors”.
Automatic folding mechanism
The automatic folding mechanism
operates when the ignition is switched to
ACC or OFF.
When the outer mirror automatic folding
switch is pressed to the AUTO position
(neutral position), the outside mirrors
automatically fold in and out when the
doors are locked and unlocked.
Also, when the ignition is switched ON
or the engine is started, the outside
mirrors fold out automatically.AUTO position
(neutral position)


6
When Driving
Starting the Engine
(SKYACTIV-D 2.2)
• The starter does not rotate until the glow indicator light turns off.
• When starting the engine, do not release the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) until the glow indicator light in the
instrument cluster turns off and the engine starts, after pressing the push button
start.
1. Make sure the parking brake is on.
2. Continue to press the brake pedal firmly until
the engine has completely started.
3. (Manual transaxle)
Continue to press the clutch pedal firmly until
the engine has completely started.
(Automatic transaxle)
Put the vehicle in park (P). If you must restart the
engine while the vehicle is moving, shift into
neutral (N).
4. Press the push button start after both the KEY indicator
light (green) (if equipped) in the instrument cluster and
the push button start indicator light (green) illuminate.
• If the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) is
released before the engine starts, depress the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) again and press the push button start to
start the engine.
• If the ignition is left switched ON for a long period of time without the engine
running after the glow plugs are warmed up, the glow plugs may warm up again
which will illuminate the glow indicator light.
For details, refer to Section 4, “Start/Stop Engine”.
Indicator
light


8
When Driving
For details, refer to Section 4, “Start/Stop Engine”.
i-stop OFF Switch
By pressing the switch until a beep sounds,
the i-stop function is turned off and the i-stop
warning light (amber) in the instrument
cluster turns on. By pressing the switch again
until the beep sounds, the i-stop function
becomes operational and the i-stop warning
light (amber) turns off.
i-stop Warning Beep
If the driver's door is opened while engine idling is stopped, the warning sound
operates to notify the driver that engine idling is stopped. It stops when the driver's
door is closed.
i-stop indicator light (green)/i-stop warning light (amber)
i-stop indicator light (green)
• When the engine idling is stopped.
Engine idling stop conditions are met while the vehicle
is being driven.
• The light turns on when the ignition is switched ON and
turns off when the engine is started. i-stop warning light (amber)
• The light turns on when the i-stop OFF switch is
pressed and the system is turned off. • (Except European model)


When Driving
12
Lock-release button
Automatic Transaxle Controls
Various Lockouts:
Indicates that you must depress
the brake pedal and hold in the
lock-release button to shift (The
ignition must be switched ON).
Indicates the selector lever can be
shifted freely into any position.
Indicates that you must hold in
the lock-release button to shift.
Drive Selection Switch
Drive Selection
Drive selection is a system to switch the vehicle's drive mode. When the sport mode is
selected, vehicle's response against accelerator operation is enhanced. This provides
additional quick acceleration which may be needed to safely make manoeuvres such
as lane changes, merging onto freeways, or passing other vehicles.
Pull the drive selection switch back (“ ”) to
cancel the sport mode. Press the drive selection switch forward (“ ”)
to select the sport mode.
Select Mode Indication
When the sport mode is selected, the select mode
indication turns on in the instrument cluster.
For details, refer to Section 4, “Automatic Transaxle” or “Drive Selection”.


16
When Driving
For details, refer to Section 4, “i-ACTIVSENSE”.
Adaptive LED Headlights (ALH)
The system switches the headlights to the high beams after the ignition is switched
ON and the headlight switch is in the AUTO position.
To turn on the system
NOTE
Under the following conditions, the Adaptive LED Headlights (ALH) may not
operate normally. Manually switch between the high and low beams according to
the visibility, and the road and traffic conditions.
• When there are other sources of light in the area such as street lamps,
illuminated signboards, and traffic signals.
• When there are reflective objects in the surrounding area such as reflective
plates and signs.
• When visibility is reduced under rain, snow and foggy conditions.
• When driving on roads with sharp curves or undulations.
CAUTION
• Do not modify the suspensions or headlight units, or remove the camera.
Otherwise, the Adaptive LED Headlights (ALH) may not operate normally.
• Do not rely excessively on the Adaptive LED Headlights (ALH) and drive
the vehicle while paying sufficient attention to safety. Switch the headlights
between the high beams and low beams manually if necessary.
• When the headlights/rear lamps of vehicles ahead or in the opposite lane are
dim or not illuminated.
• When there is insufficient darkness such as at dawn or dusk.
• When the luggage compartment is loaded with heavy objects or the rear
passenger seats are occupied.
• When visibility is reduced due to a vehicle ahead spraying water from its
tyres onto your windscreen.


Maintenance and Care
34
Selector
For details, refer to Section 6, “Owner Maintenance”.
Inspecting Engine Oil Level
If the engine oil level exceeds the “X” mark on the dipstick, replace the engine oil.
When inspecting the engine oil level, pull out the dipstick straight without
twisting.
In addition, when inserting the dipstick, always insert it without twisting so that
the “X” mark faces the front of the vehicle.
Whenever the engine oil is replaced, the vehicles engine control unit needs to be
reset as soon as possible. Otherwise the wrench indicator light or engine oil
warning light may turn on. To reset the engine control unit, consult an expert
repairer, we recommend an Authorised Mazda Repairer or refer to the vehicle
engine control unit reset procedure.
NOTE
The initialization (engine oil data resetting) of the recorded value can be
performed using the following procedure:
1. Switch the ignition OFF.
2. Switch the ignition ON with the selector pressed, and press and hold the
selector for about 5 seconds until the master warning light flashes.
3. After the master warning light flashes for several seconds, the initial-
ization is completed.
X Mark MAX MIN