2016 MAZDA MODEL 3 HATCHBACK instrument cluster
[x] Cancel search: instrument clusterPage 7 of 39
When Driving
6For details, refer to Section 4, “Start/Stop Engine”.
Indicator light
Push button start
Starting the Engine
(SKYACTIV-D 1.5, SKYACTIV-D 2.2)
•The starter does not rotate until the glow indicator light turns off.
• When starting the engine, do not release the clutch pedal (manual transaxle) or
the brak
e pedal (automatic transaxle) until the glow indicator light in the
instrument cluster turns off and the engine starts, after pressing the push button
start.
1. Make sure the parking brake is on.
2. Continue to press the brake pedal firmly until
the engine has completely started.
3. (Manual transaxle)
Continue to press the clutch pedal firmly until
the engine has completely started.
(Automatic transaxle)
Put the vehicle in park (P). If you must restart the
engine while the vehicle is moving, shift into
neutral (N).
4. Press the push button start after both the KEY indicator
light (green) in the instrument cluster and the push button
start indicator light (green) illuminate.
• If the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) is
released before the engine starts, depress the clutch pedal (manual transaxle) or
the brak
e pedal (automatic transaxle) again and press the push button start to
start the engine.
• If the ignition is left switched ON for a long period of time without the engine
running after the glow plugs are warmed up, the glow plugs may warm up again
which will illuminate the glow indicator light.
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 9 of 39
8
When Driving
For details, refer to Section 4, “Start/Stop Engine”.
i-stop OFF Switch
The i-stop function can be turned off by
pressing the switch until the beep sounds and
the i-stop warning light (amber) in the
instrument cluster illuminates.
The i-stop function can be turned back on by
pressing the switch again until the beep sounds
and the i-stop warning light (amber) turns off.Automatic transaxle
2. The engine restarts automatically when the brake pedal is released with the
selector lever in the D or M position (not in second gear fixed mode). 1. Engine idling stops when the brake pedal is depressed while the vehicle is
driven (except for driving in the R or M position second gear fixed mode) and
the vehicle is stopped.
3. If the selector lever is in the N or P position, the engine does not restart when the
brake pedal is released. The engine restarts when the brake pedal is depressed
again or the selector lever is shifted to the D, M (not in second gear fixed mode)
or the R position. (For the purposes of safety, always keep the brake pedal
depressed when shifting the selector lever while engine idling is stopped.)
Operation of i-stop Function
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 11 of 39
When Driving
For details, refer to Section 4, “Instrument Cluster and Display”.
Warning Lights
Signal Warning
1
2
3
4
5
6
7
8
9
10Charging System Warning Light Brake System Warning Light
Engine Oil Warning Light
High Engine Coolant Temperature
Warning Light
i-stop Warning Light
Power Steering Malfunction Warning
Light
Master Warning Light
Electric Parking Brake Warning
Light
Check Engine Light
11
12
13
14Automatic Transaxle Warning Light
Air Bag/Front Seat Belt Pretensioner
System Warning Light
Tyre Pressure Monitoring System
Warning Light
15KEY Warning Light
Adaptive LED Headlights (ALH)
Warning Light20Mazda Radar Cruise Control
(MRCC) Warning Light
Lane Departure Warning System
(LDWS) Warning Light
Low Fuel Warning Light
120 km/h Warning Light
Seat Belt Warning Light (Front seat)
Low Washer Fluid Level Warning
Light
Door-Ajar Warning Light Signal Warning
ABS Warning Light
These lights turn on or flash to notify the user of the system operation status or a
system malfunction.
19Lane-keep Assist System (LAS) &
Lane Departure Warning System
(LDWS) Warning LightLED Headlight Warning Light
Smart Brake Support/Smart City
Brake Support (SBS/SCBS) Warning
Light
21 16
17
18
22
23
24
25
10
Seat Belt Warning Light (Rear seat)
26
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 12 of 39
When Driving
30
For details, refer to Section 4, “Instrument Cluster and Display”.
Indication/Indicator Lights
Signal Indicator Lights
1
2
3
4
5
6
7
8
9
10KEY Indicator Light Blind Spot Monitoring (BSM) OFF
Indicator Light
Security Indicator Light
Vehicle Speed Alarm Indication
Glow Indicator Light
Diesel Particulate Filter Indicator
Light
Wrench Indicator Light
Low Engine Coolant Temperature
Indicator Light
i-stop Indicator Light
11
12
13
14i-ELOOP Indicator Light
Shift Position Indication
Lights-On Indicator Light
15Headlight High-Beam Indicator
Light20Rear Fog Light Indicator Light
Electric Parking Brake Indicator
Light
Brake Pedal Operation demand
Indicator Light
Mazda Radar Cruise Control
(MRCC) Indicator Light
Smart Brake Support/Smart City
Brake Support (SBS/SCBS)
Indicator Light
Smart Brake Support/Smart City
Brake Support (SBS/SCBS) OFF
Indicator Light
Seat Belt Warning Light (Rear seat)
Cruise Main Indicator Light
Cruise Set Indicator Light
Adjustable Speed Limiter Main
Indicator Light Signal Indicator Lights
Lane Departure Warning System
(LDWS) OFF Indicator Light
These lights turn on or flash to notify the user of the system operation status or a
system malfunction.
19
TCS/DSC Indicator Light
DSC OFF Indicator Light
29Select Mode Indicator Light
Adaptive LED Headlights (ALH)
Indicator Light
21 17
18
22
23
24
25
26
27
28
Direction Indicator/Hazard Warning
Indicator Lights
Front Fog Light Indicator Light
16Adjustable Speed Limiter Set
Indicator Light 31
11
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 13 of 39
12
When Driving
Lock-release
button
For details, refer to Section 4, “Automatic Transaxle” or “Drive selection”.
Drive Selection
Drive Selection Switch Drive selection is a system to switch the vehicle's drive mode. When the sport mode
is selected, vehicle's response against accelerator operation is enhanced. This
provides additional quick acceleration which may be needed to safely make
manoeuvres such as lane changes, merging onto freeways, or passing other vehicles.
Press the drive selection switch forward “ ( ) ” to select the sport mode. Pull
the drive selection switch back “ ( ) ” to cancel the sport mode.
With Electric Parking Brake
Without Electric Parking Brake
Select Mode Indicator Light
When the sport mode is selected, the
select mode indicator light turns on in
the instrument cluster.
Automatic Transaxle ControlsVarious Lockouts:
Indicates that you must depress
the brake pedal and hold in the
lock-release button to shift (The
ignition must be switched ON).
Indicates the selector lever can be
shifted freely into any position.
Indicates that you must hold in
the lock-release button to shift.
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 17 of 39
When Driving
For details, refer to Section 4, “i-ACTIVSENSE”.
Adaptive LED Headlights (ALH)
NOTE
Under the following conditions, the Adaptive LED Headlights (ALH) may not
operate normally. Manually switch between the high and low beams according to
the visibility, and the road and traffic conditions.
• When there are other sources of light in the area such as street lamps,
illuminated signboards, and traffic signals.
• When there are reflective objects in the surrounding area such as reflective
plates and signs.
• When visibility is reduced under rain, snow and foggy conditions.
• When driving on roads with sharp curves or undulations.
The system switches the headlights to the high beams after the ignition is switched
ON and the headlight switch is in the position.
The Adaptive LED Headlights
(ALH) indicator light (green) in the instrument cluster turns on simultaneously.
To Operate the System
CAUTION
• Do not modify the suspensions or headlight units, or remove the camera.
Otherwise, the Adaptive LED Headlights (ALH) may not operate normally.
• Do not rely excessively on the Adaptive LED Headlights (ALH) and drive
the vehicle while paying sufficient attention to safety. Switch the headlights
between the high beams and low beams manually if necessary.
• When the headlights/rear lamps of vehicles ahead or in the opposite lane are
dim or not illuminated.
• When there is insufficient darkness such as at dawn or dusk.
• When the luggage compartment is loaded with heavy objects or the rear
passenger seats are occupied.
• When visibility is reduced due to a vehicle ahead spraying water from its
tyres onto your windscreen.
16
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 26 of 39
When Driving
25For details, refer to Section 4, “i-ACTIVSENSE”.
Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS)
If the LDWS OFF indicator light in the instrument
cluster turns off when the ignition is switched ON,
the system goes on standby. System Operation
If the LDWS OFF indicator light in the
instrument cluster turns on when the ignition is
switched ON, press the LDWS OFF switch so
that the system goes on standby.
• The vehicle is driven in the centre of the driving lane with the white
or yello
w lines on the left and right sides, or on either side.
• The vehicle speed is about 70 km/h (44 mph) or faster.
Other conditions are described in the related text.Drive the vehicle in the centre of the vehicle lane while
the system is on standby. The system becomes
operational when all of the following conditions are met.
• The vehicle is driven on a straight road or road with gentle curves.
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 34 of 39
33
When Driving
Diesel Particulate Filter
The diesel particulate filter collects and removes most of the particulate matter
(PM) in the exhaust gas of a diesel engine.
• If the vehicle is driven at 15 km/h (9 mph) or less continuously.
For details, refer to Section 4, “Tyre Pressure Monitoring System” or
“Diesel Particulate Filter”.
The Tyre Pressure Monitoring System (TPMS) monitors the air pressure of all
four tyres. If the air pressure of one or more tyres is too low, the system warns the
driver by indicating the tyre pressure monitoring system warning light in the
instrument cluster and operating a beep sound.
In the following cases, system initialization must be performed so that the system
operates normally.
• A tyre pressure is adjusted.
•
Tyre rotation is performed.
• A tyre or wheel is replaced.
• The battery is replaced or completely drained.
• The tyre pressure monitoring system warning
light is illuminated.
Tyre Pressure Monitoring System
PM collected by the diesel particulate filter is cleared during normal driving,
however, PM may not be removed and the diesel particulate filter indicator light
may illuminate under the following conditions:
• If the vehicle is repeatedly driven for a short period of time (10 minute or less)
or driven while the engine is cold.
• If the vehicle is idled for a long time.
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D