2016 LEXUS RX450H horn

181
3
Operation of each component
RX450h_U_OM0E013U 3-4. Adjusting the steering wheel and mirrors
Operating the switch moves the steering wheel in the following directions:
Up
Down
Toward the driver
Away from the driver
When the power switch is turned off,
the steering wheel returns to its stowed
position by moving up and away to
enable easier driver entry and exit. Turning the power switch to ACCES-
SORY or ON mode will return the
steering wheel to the original position.
To sound the horn, press on or close to
the mark.Steering wheel Adjustment procedure 1
2
3
4
Auto tilt away
Horn

3454-5. Using the driving support systems
4
Driving
RX450h_U_OM0E013U ■
Sensor detectio n information●
The sensor’s detection areas are limited to the areas around the vehicle’s bumper. ●
Certain vehicle conditions and the surround ing environment may affect the ability of a
sensor to correctly detect an obstacle. Particular instances where this may occur are
listed below.
• There is dirt, snow or ice on the sensor . (Wiping the sensors will resolve this prob-
lem.)
• The sensor is frozen. (Thawing th e area will resolve this problem.)
In especially cold weather, if a sensor is frozen the screen may show an abnormal
display, or obstacles may not be detected.
• The sensor is covered in any way.
• The vehicle is leaning co nsiderably to one side.
• On an extremely bumpy road, on an incline, on gravel, or on grass.
• The vicinity of the vehicle is noisy due to vehicle horns, motorcycle engines, air
brakes of large vehicles, or other loud noises producing ultrasonic waves.
• There is another vehicle equipped with parking assist sensors in the vicinity.
• The sensor is coated with a sheet of spray or heavy rain.
• The vehicle is equipped with a fender pole or wireless antenna.
• Towing eyelets are installed.
• The bumper or sensor receives a strong impact.
• The vehicle is approaching a tall or curved curb.
• In harsh sunlight or intense cold weather.
• The area directly under the bumpers is not detected.
• If obstacles draw too close to the sensor.
• A non-genuine Lexus suspension (low ered suspension etc.) is installed.
• People may not be detected if they are wearing certain types of clothing.
In addition to the examples above, there are instances in which, because of their shape,
signs and other objects may be judged by a sensor to be closer than they are.●
The shape of the obstacle may prevent a sensor from detecting it. Pay particular atten-
tion to the following obstacles:
• Wires, fences, ropes, etc.
• Cotton, snow and other materials that absorb sound waves
• Sharply-angled objects
•Low obstacles
• Tall obstacles with upper sections projecting outwards in the direction of your vehi-
cle ●
The following situations may occur during use.
• Depending on the shape of the obstacle and other factors, the detection distance
may shorten, or detect ion may be impossible.
• Obstacles may not be detected if they are too close to the sensor.
• There will be a short delay between obst acle detection and display. Even at slow
speeds, there is a possibility that the obstacle w ill come within the sensor’s detection
areas before the display is shown and the buzzer sounds.
• Thin posts or objects lower than the sensor may not be detected when approached,
even if they have been detected once.
• It might be difficult to hear beeps due to th e volume of audio system or air flow noise
of the air conditioning system.

5617-2. Steps to take in an emergency
7
When trouble arises
RX450h_U_OM0E013U One of the following may be the cause of the problem: ●
The electronic key may not be functioning properly.
(  P. 5 6 4 )●
There may not be sufficient fuel in the vehicle’s tank.
Refuel the vehicle. ●
There may be a malfunction in the immobilizer system. (  P. 8 5 )●
There may be a malfunction in the steering lock system. ●
The hybrid system may be malfunctioni ng due to an electrical problem such
as electronic key battery depletion or a blown fuse. However, depending on
the type of malfunction, an interim meas ure is available to start the hybrid sys-
tem. (  P. 5 6 2 )
One of the following may be the cause of the problem: ●
The 12-volt battery may be discharged. (  P. 5 6 8 )●
The 12-volt battery terminal connections may be loose or corroded.
(  P. 4 8 3 )If the hybrid system will not start Reasons for the hybrid system not starting vary depending on the situation.
Check the following and perform the appropriate procedure:
The hybrid system will not start ev en though the correct starting proce-
dure is being followed. (  P. 2 3 2 )
The interior lights and headlights are dim, or the horn does not sound or
sounds at a low volume.

562 7-2. Steps to take in an emergency
RX450h_U_OM0E013U One of the following may be the cause of the problem: ●
The 12-volt battery may be discharged. (  P. 5 6 8 )●
One or both of the 12-volt battery terminals may be disconnected. (  P. 4 8 3 )Contact your Lexus dealer if the problem cannot be repaired, or if repair procedures
are unknown.
When the hybrid system does not start, the following steps can be used as an
interim measure to start the hybrid system if the power switch is functioning nor-
mally.
Do not use this starting procedur e except in cases of emergency.
Turn the power switch to ON mode and check that the parking brake is set.
(  P. 2 3 3 , 2 4 5 )
Shift the shift lever to P.
Turn the power switch to ACCESSORY mode.
Press and hold the power switch for ab out 15 seconds while depressing the
brake pedal firmly.
Even if the hybrid system can be starte d using the above steps, the system may
be malfunctioning. Have the vehicle inspected by your Lexus dealer.The interior lights and headlights do not turn on, or the horn does not
sound.
Emergency start function 1
2
3
4

638 What to do if... (Troubleshooting)
RX450h_U_OM0E013U ●
The seat belt reminder light is flashing
Are the driver and the front passenger wearing the seat belts? (  P. 5 3 8 )●
The parking brake indicator is on
Is the parking brake released? (  P. 2 4 5 )
Depending on the situation, other type s of warning buzzer may also sound.
(  P. 5 3 6 , 5 4 3 ) ●
Did anyone inside the vehicle open a door during setting the alarm?
The sensor detects it and the alarm sounds. (  P. 8 7 )
Do one of the following to stop the alarms: • Unlock the doors.
• Turn the power switch to ACCESSORY or ON mode, or start the hybrid system.
●
Is the message displayed on the multi-information display?
Check the message on the multi-information display. (  P. 5 4 3 )●
When a warning light turns on or a warning message is displayed, refer to
P. 5 3 6 , 5 4 3 . A warning buzzer sounds during driving
An alarm is activated and the horn sounds
A warning buzzer sounds when leaving the vehicle
A warning light turns on or a warning message is displayed

647Alphabetical index
RX450h_U_OM0E013U Horn .............................................................. 181
HUD (Head-up display) ....................... 118
Humidity sensor ......................................413
Hybrid battery air vent ............................81
Hybrid battery (traction battery)
Location .................................................... 80
Specification ........................................ 585
Hybrid system ............................................76
Emergency shut off system............... 81
Energy monitor/
consumption screen .......................124
EV drive mode.................................... 237
High voltage components .............. 80
Hybrid System Indicator .................100
Hybrid system precautions............. 80
Hybrid vehicle driving tips.............387
If the hybrid system will not
start ......................................................... 561
Overheating .........................................574
Power (ignition) switch ................... 232
Regenerative braking ......................... 78
Starting the hybrid system ............. 232
Vehicle proximity notification
system ..................................................... 77
Hybrid System Indicator..................... 100
Hybrid transmission ............................ 239
If the shift lever cannot be
shifted from P .................................. 563
Paddle shift switches ............. 240, 241
S mode ......................................................241 I/M test ......................................................470
Identification
Engine .....................................................583
Vehicle ....................................................583
Ignition switch (power switch) .........232
Illuminated entry system ................... 420
Immobilizer system ................................ 85
Indicators .....................................................92
Initialization
Engine oil maintenance data ....... 478
Items to initialize ...................................619
Power back door ............................... 150
Tire pressure warning
system ................................................. 488
Inside rear view mirror.........................183
Instrument panel light control .............99
Interior lights ............................................ 417
Switch ........................................................418
Wattage ................................................ 590
Intuitive parking assist ........................ 339
Jack
Positioning a floor jack.................... 474
Vehicle-equipped jack .................. 550
Jack handle ............................................. 550
Jam protection function
Electronic sunshade.......................... 198
Moon roof ...............................................194
Panoramic moon roof...................... 198
Power back door opener
and closer ........................................... 150
Power windows................................... 190 I
J