6779-1. Specifications
9
Vehicle specifications
RX350_U_OM48E90U ■
Engine oil selection
“Toyota Genuine Motor Oil” is used in your Lexus vehicle. Use Lexus
approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following
grade and viscosity.
Oil grade: ILSAC GF-5 multigrade engine oil
Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice for
good fuel economy and good start-
ing in cold weather.
If SAE 0W-20 is not available, SAE
5W-20 oil may be used. However, it
must be replaced with SAE 0W-20
at the next oil change.
Oil viscosity (0W-20 is explained here as an example):
• The 0W in 0W-20 indicates the characteristic of the oil which allows cold
startability. Oils with a lower value before the W allow for easier starting of
the engine in cold weather.
• The 20 in 0W-20 indicates the viscos ity characteristic of the oil when the
oil is at high temperature. An oil with a higher viscosity (one with a higher
value) may be better suited if the vehicle is operated at high speeds, or
under extreme load conditions.
How to read oil container label:
The International Lubricant Specifi-
cation Advisory Committee
(ILSAC) Certification Mark is added
to some oil containers to help you
select the oil you should use. Outside temperature
748
RX350_U_OM48E90U GAS STATION INFORMATION
Auxiliary catch lever Fuel filler door
P. 5 7 2 P. 2 6 0
Hood lock release lever Tire inflation pressure
P. 5 7 2 P. 6 8 0
Fuel tank capacity
(Reference) 19.2 gal. (72.5 L, 15.9 Imp. gal.)
Fuel type Unleaded gasoline only P. 676
Cold tire inflation
pressure P. 6 8 0
Engine oil capacity
(Drain and refill —
reference) With filter qt. (L, Imp. qt.)
Vehicles with towing package 5.8 (5.5, 4.8)
Vehicles without towing package 5.7 (5.4, 4.8)
Without filter 5.6 (5.3, 4.7)
Engine oil type “Toyota Genuine Motor Oil” or equivalent
Oil grade: ILSAC GF-5 multigrade engine oil
Recommended viscosity: SAE 0W-20
P. 6 7 7
