2016 LEXUS IS250 recommended oil

300
4-2. Maintenance
General maintenance
Engine compartment
ItemsCheck points
BatteryMaintenance-free. (→P. 32 1 )
Brake fluidAt the correct level? (→P. 31 9 )
Engine coolantAt the correct level? (→P. 31 7 )
Engine oilAt the correct level? (→P. 31 3 )
Exhaust systemNo fumes or strange sounds?
Radiator/condenser/hosesNot blocked with foreign matter?
(→P. 31 9 )
Wa s h e r f l u i dAt the correct level? (→P. 32 4 )
Listed below are the general maintenance items that should be performed
at the intervals specified in the “Warranty and Services Guide” or “Owners
Manual Supplement”. It is recommended that any problem you notice
should be brought to the attention of your Lexus dealer or qualified service
shop for advice.

315
4-3. Do-it-yourself maintenance
4

Maintenance and care
nRecommended viscosity
SAE 5W-30 is the best choice for
good fuel economy, and good
starting in cold weather.
*: If SAE 5W-30 oil is not avail-
able, SAE 10W-30 oil may be
used. However, it should be
replaced with SAE 5W-30 at
the next oil change.
nHow to read oil container labels
Some oil containers are labeled with ILSAC certification marks that
help you to select the proper oil.
Outside temperature

434
6-1. Specifications
Lubrication system
*: 5W-30 is an oil that provides optimal levels of fuel efficiency.
Oil viscosity
lThe 5W portion of the oil viscosity rating indicates the characteristic of
the oil which allows cold startability. Oils with a lower value before the W
allow for easier starting of the engine in cold weather.
lThe 30 in 5W-30 indicates the oil viscosity when the oil is at its operating
temperature. An oil with a higher viscosity may be better suited if the
vehicle is operated at high speeds, or under extreme load condition.
IS250IS350
Oil capacity
(drain and refill)
without filter
2WD models
AWD models
6.2 qt. (5.9 L, 5.2 lmp.qt.)
6.3 qt. (6.0 L, 5.3 lmp.qt.)
6.2 qt. (5.9 L, 5.2 lmp.qt.)
⎯
with filter
2WD models
AWD models
6.6 qt. (6.3 L, 5.5 lmp.qt.)
6.8 qt. (6.4 L, 5.7 lmp.qt.)
6.6 qt. (6.3 L, 5.5 lmp.qt.)
⎯
Oil gradeILSAC multi-grade engine oil
Recommended oil
viscosity
Use Lexus approved “Toyota Genuine Motor Oil” or
equivalent to satisfy the grade and viscosity shown
below.
Outside temperature

437
6-1. Specifications
6

Vehicle specifications
Automatic Transmission
*: The fluid capacity is provided as a reference. If replacement is necessary, con-
tact your Lexus dealer.
Manual Transmission
Clutch
IS350IS250 (2WD)IS250 (AWD)
Fluid capacity*7. 5 q t .
(7.1 L, 6.2 lmp.qt.)
7. 5 q t .
(7.1 L, 6.2 lmp.qt.)
9.4 q t .
(8.9 L, 7.8 lmp.qt.)
Fluid typeToyota Genuine ATF WS
NOTICE
Using automatic transmission fluid other than “Toyota Genuine ATF WS” may cause
deterioration in shift quality, locking up of your transmission accompanied by vibra-
tion, and ultimately damage the automatic transmission of your vehicle.
Gear oil capacity1.9 qt. (1.8 L, 1.6 Imp.qt.)
Gear oil typeAPI GL-5
Recommended gear oil viscositySAE75W-90
NOTICE
Using manual transmission gear oil other than “TOYOTA Genuine Manual
Transmission Gear Oil API GL-5” may cause occurrence of gear noise or other dete-
rioration.
Clutch free play0.2 ⎯ 0.6 in. (5 ⎯ 15 mm)
Fluid typeSAE J1703 or FMVSS No.116 DOT 3

488
GAS STATION INFORMATION
Auxiliary catch lever
P. 3 0 7
Trunk opener
P. 4 3
Fuel filler door
P. 74
Hood lock release lever
P. 3 0 7
Fuel filler door opener
P. 74
Tire inflation pressure
P. 4 3 9
Fuel tank capacity17.2 gal. (65 L, 14.3 lmp.gal.)
Fuel typeUnleaded gasoline onlyP. 75, 433
Cold tire inflation pressureP. 4 3 9
Engine oil capacity
(Drain and refill)
qt. (L, Imp.qt.)
IS250IS250(2WD models) (AWD models) IS350
Without filter 6.2 (5.9, 5.2)6.3 (6.0, 5.3) 6.2 (5.9, 5.2)
With filter 6.6 (6.3, 5.5) 6.8 (6.4, 5.7) 6.6 (6.3, 5.5)
Engine oil type
Toyota Genuine Motor Oil or equivalent
Oil grade: ILSAC multigrade engine oilP. 434
Recommended oil viscosity: SAE 5W-30