2016 LEXUS IS250 audio

228
3-2. Using the audio system
Contact the XM® Listener Care Center at 1-877-515-3987 (U.S.A.) or 1-877-
438-9677 (Canada).
nCertifications for the radio tuner
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by trying one or more of the following:
lReorienting or relocate the receiving antenna.
lIncreasing the separation between the equipment and receiver.
lConnecting the equipment into an outlet on a circuit different from that to which
the receiver is connected.
lConsulting the dealer or an experienced radio/TV technician for help.
“---”
The channel you selected is no longer available. Wait
for about 2 seconds until the radio returns to the previ-
ous channel or “CH001”. If it does not change auto-
matically, select another channel.

229
3-2. Using the audio system
3

Interior features
Using the CD player
Loading CDs
nLoading a CD
Push .
“WAIT” is shown on the display.
Insert a CD when the indicator on the slot turns from amber to
green.
The display changes from “WAIT” to “LOAD”.
nLoading multiple CDs
Press and hold until you hear a beep.
“WAIT” is shown on the display.
Insert a CD when the indicator on the slot turns from amber to
green.
The display changes from “WAIT” to “LOAD”.
The indicator on the slot turns to amber when the CD is inserted.
Po w e r Vo l u m e
Track selection
CD ejectPlayback
Search playbackCD load
CD selection
Random playback
Repeat playDisplays text
message
STEP1
STEP2
STEP1
STEP2

230
3-2. Using the audio system
Insert the next CD when the indicator on the slot turns from
amber to green again.
Repeat the procedure for the remaining CDs.
To stop the operation, press .
Ejecting CDs
nEjecting a CD
To select the CD to be ejected,
press “∧” or “∨” on .
The number of the CD selected is
shown on the display.
Press and remove the CD.
nEjecting all the CDs
Press and hold until you hear a beep, and then remove the CDs.
Selecting, fast-forwarding, and scanning tracks
nSelecting a track
Press “∧” to move up and “∨” to move down using until the
desired track number is displayed.
To fast forward or reverse, press and hold “∧” or “∨” on .
nScanning a CD
Press .
The first ten seconds of each track will be played.
Press again when the desired track is reached.
STEP3
STEP1
STEP2
STEP1
STEP2

231
3-2. Using the audio system
3

Interior features
Selecting a CD
nTo select a CD to play
To select the desired CD, press “∧” or “∨” on .
nTo scan loaded CDs
Press and hold until you hear a beep.
The first ten seconds of the first track on each CD will be played.
Press again when the desired CD is reached.
Random playback
nCurrent CD
Press (RAND).
Songs are played in random order until random playback is canceled.
nAll CDs
Press and hold (RAND) until you hear a beep.
Tracks on all loaded CDs are played in a random order until
(RAND) is pressed once more.
Repeat play
nTo repeat a track
Press (RPT).
nTo repeat all of the tracks on a CD
Press and hold (RPT) until you hear a beep.
Switching the display
Press .
Each time is pressed, the display changes in the order of Track no./
Elapsed time → CD title → Track name.
STEP1
STEP2

232
3-2. Using the audio system
nDisplay
Up to 12 characters can be displayed at a time.
If there are 13 characters or more, pressing and holding for 1 second or
more will display the remaining characters.
A maximum of 24 characters can be displayed.
If is pressed for 1 second or more again or has not been pressed for 6 sec-
onds or more, the display will return to the first 12 characters.
Depending on the contents recorded, the characters may not be displayed prop-
erly or may not be displayed at all.
nCanceling random, repeat and scan playback
Press (RAND), (RPT), or again.
nWhen “LOAD”, “ERROR” or “WAIT” is shown on the display
“LOAD”: This indicates that the CD player has completed loading the CD.
“ERROR”: Make sure the label of the displayed disc is facing up, and then reinsert it
in the player.
“WAIT”: Operation is stopped due to a high temperature inside the player. Wait
for a while and then press . Contact your Lexus dealer if the CD
still cannot be played back.
nDiscs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc features, or
due to scratches, dirt or deterioration.
CDs with copy-protection features may not play correctly.

233
3-2. Using the audio system
3

Interior features
nCD player protection feature
To protect the internal components, playback is automatically stopped when a
problem is detected.
nIf CDs are left inside the CD player or in the ejected position for extended peri-
ods
CDs may be damaged and may not play properly.
nLens cleaners
Do not use lens cleaners. Doing so may damage the CD player.
NOTICE
nCDs and adapters that cannot be used
Do not use the following types of CDs, 3 in. (8 cm) CD adapters or Dual Disc.
Doing so may damage the CD player and/or the CD insert/eject function.
lCDs that have a diameter that is not 4.7 in.
(12 cm).
lLow-quality and deformed CDs.

234
3-2. Using the audio system
NOTICE
nCD player precautions
Failure to follow the precautions below may result in serious damage to the CDs or
the player itself.
lDo not insert anything other than CDs into the CD slot.
lDo not apply oil to the CD player.
lStore CDs away from direct sunlight.
lNever try to disassemble any part of the CD player.
lCDs with a transparent or translucent
recording area.
lCDs that have had tape, stickers or CD-R
labels attached to them, or that have had
the label peeled off.
lDo not insert more than one CD at a time.

235
3-2. Using the audio system
3

Interior features
Playing back MP3 and WMA discs
Loading, ejecting and selecting MP3 and WMA discs
→P. 22 9
Selecting a folder
nSelecting folders one at a time
Press (∧) or (∨) to select the desired folder.
nSelecting the desired folder by cueing the first file of each folder
Press and hold until you hear a beep. When the desired folder is
reached, press once again.
nReturning to the first folder
Press and hold (∨) until you hear a beep.
Po w e r Vo l u m e
CD eject
Playback
Search playbackCD load
CD selection
File selection
Random playback
Repeat play
Displays text message
Folder selection
File
selection